Analyses of preservatives by capillary electrochromatography using methacrylate ester-based monolithic columns

Five common food preservatives were analyzed by capillary electrochromatography, utilizing a methacrylate ester-based monolithic capillary as separation column. In order to optimize the separation of these preservatives, the effects of the pore size of the polymeric stationary phase, the pH and composition of the mobile phase on separation were examined. For all analytes, it was found that an increase in pore size caused a reduction in retention time. However, separation performances were greatly improved in monolithic columns with smaller pore sizes. The pH of the mobile phase had little influence on separation resolution, but a dramatic effect on the amount of sample that was needed to be electrokinetically injected into the monolithic column. In addition, the retention behaviors of these analytes were strongly influenced by the level of acetonitrile in the mobile phase. An optimal separation of the five preservatives was obtained within 7.0 min with a pH 3.0 mobile phase composed of phosphate buffer and acetonitrile 35:65 v/v. Finally, preservatives in real commercial products, including cold syrup, lotion, wine, and soy sauces, were successfully determined by the methacrylate ester-based polymeric monolithic column under this optimized condition.     

Self-assembly of tetrahedral and trigonal antiprismatic clusters [Fe4(L4)4] and [Fe6(L5)6] on the basis of trigonal tris-bidentate chelators

In a one-pot reaction, the tetranuclear iron chelate complex [Fe4(L4)4] 6 was generated from benzene-1,3,5-tricarboxylic acid trichloride (4), bis-tert-butyl malonate (5a), methyllithium, and iron(II) dichloride under aerobic conditions. Alternatively, hexanuclear iron chelate complex [Fe(L5)6] 7 was formed starting from bis-para-tolyl malonate (5b) by employing identical reaction conditions to those applied for the synthesis of 6. The clusters 6 and 7 are present as racemic mixtures of homoconfigurational (delta,delta,delta,delta)/(lambda,lambda,lambda,lambda)-fac or (delta,delta,delta,delta,delta,delta)/(lambda,lambda,lambda,lambda,lambda,lambda)-fac stereoisomers. The structures of 6 and 7 were unequivocally resolved by single-crystal X-ray analyses. The all-iron(III) character of 6 and 7 was determined by M?ssbauer spectroscopy.     

Origin of Thermal Degradation of Sr(2-x)Si(5)N(8):Eu(x) Phosphors in Air for Light-Emitting Diodes

The orange-red emitting phosphors based on M(2)Si(5)N(8):Eu (M = Sr, Ba) are widely utilized in white light-emitting diodes (WLEDs) because of their improvement of the color rendering index (CRI), which is brilliant for warm white light emission. Nitride-based phosphors are adopted in high-performance applications because of their excellent thermal and chemical stabilities. A series of nitridosilicate phosphor compounds, M(2-x)Si(5)N(8):Eu(x) (M = Sr, Ba), were prepared by solid-state reaction. The thermal degradation in air was only observed in Sr(2-x)Si(5)N(8):Eu(x) with x = 0.10, but it did not appear in Sr(2-x)Si(5)N(8):Eu(x) with x = 0.02 and Ba analogue with x = 0.10. This is an unprecedented investigation to study this phenomenon in the stable nitrides. The crystal structural variation upon heating treatment of these compounds was carried out using the in situ XRD measurements. The valence of Eu ions in these compounds was determined by electron spectroscopy for chemical analysis (ESCA) and X-ray absorption near-edge structure (XANES) spectroscopy. The morphology of these materials was examined by transmission electron microscopy (TEM). Combining all results, it is concluded that the origin of the thermal degradation in Sr(2-x)Si(5)N(8):Eu(x) with x = 0.10 is due to the formation of an amorphous layer on the surface of the nitride phosphor grain during oxidative heating treatment, which results in the oxidation of Eu ions from divalent to trivalent. This study provides a new perspective for the impact of the degradation problem as a consequence of heating processes in luminescent materials.     

Measurement of the Binding of Adenosylcobalamin to Glutamate Mutase by Fluorescence Spectroscopy

Fluorescence spectroscopy is a fast, highly sensitive technique for investigating protein‐ligand interactions. Intrinsic protein fluorescence is usually occurred by exciting the proteins with 280‐295 nm ultraviolet light, and the light emission is observed approximately between 330‐350 nm. No emission light between 330‐350 nm can be observed when adenosylcobalamin (AdoCbl) is excited at 282 nm. The binding of AdoCbl to glutamate mutase was therefore investigated by fluorescence spectroscopy in this study. Our results show that direct measurement for determining the K_d of AdoCbl by fluorescence spectroscopy leads to significant errors. Here we report the source of error and a corrected method for measuring the binding of coenzyme B₁₂ to glutamate mutase using fluorescence spectroscopy.     

Quantitative analysis of multivalent interactions of carbohydrate-encapsulated gold nanoparticles with concanavalin A

Multivalent interactions between carbohydrate-encapsulated gold nanoparticles and Con A are found with high affinity and specificity.     

Readily synthesised arylamino fumaronitrile for non-doped red organic light-emitting diodes

Bright (maximum 10034 cd m(-2), 455 cd m(-2) at 20 mA cm(-2)) and efficient (maximum 2.4% at 4 mA cm(-2)) red (lambda(max)el 634-636 nm) organic light-emitting diodes employ arylamino-substituted fumaronitrile as the novel host emitter, which is readily prepared and easily purified.     

Synthesis,and Antimycobacterial and Cytotoxic Evaluation of Certain Fluoroquinolone Derivatives

Certain 1‐ethyl‐ and 1‐aryl‐6‐fluoro‐1,4‐dihydroquinol‐4‐one derivatives were synthesized and evaluated for antimycobacterial and cytotoxic activities. Preliminary results indicated that, for 1‐aryl‐6‐fluoroquinolones, both 7‐(piperazin‐1‐yl)‐ and 7‐(4‐methylpiperazin‐1‐yl) derivatives, 9b and 11a , are able to completely inhibit the growth of M. tuberculosis at a concentration of 6.25 μg/ml, while the 7‐[4‐(2‐oxo‐2‐phenylethyl)piperazin‐1‐yl] derivative 13 exhibits only 31% growth inhibition at the same concentration. For 1‐ethyl‐6‐fluoroquinolones, both 7‐[4‐(2‐oxopropyl)piperazin‐1‐yl]‐ and 7‐[4‐(2‐oxo‐2‐phenylethyl)piperazin‐1‐yl]‐derivatives, 2a and 2b , respectively, show complete inhibition, while their 2‐iminoethyl and substituted phenyl counterparts 3a and 2c are less active. In addition, the 6,8‐difluoro derivative was a more‐favorable inhibitor than its 6‐fluoro counterpart ( 2b vs. 2d ). These results deserve full attention especially because 2a, 2b, 9b , and 11a are non‐cytotoxic at a concentration of 100 μM . Furthermore, compound 9b proved to be a potent anti‐TB agent with selective index (SI)>40 and an EC₉₀ value of 5.75 μg/ml.     

Activation of Open‐Cage Fullerenes with Ruthenium Carbonyl Clusters

Reactions of the open‐cage fullerene C₆₃NO₂(Py)(Ph)₂ ( 1 ) with [Ru₃(CO)₁₂] produce [Ru₃(CO)₈(μ,η⁵‐C₆₃NO₂(Py)(Ph)₂)] ( 2 ), [Ru₂H(CO)₃(μ,η⁷‐C₆₃N(Py)(Ph)(C₆H₄))] ( 3 ), and [Ru(CO)(Py)₂₍η³‐C₆₃NO₂(Py)(Ph)₂)] ( 4 ), in which the orifice sizes are modified from 12 to 8, 11, and 15‐membered ring, through ruthenium‐mediated C?O and C?C bond activation and formation.     

A theoretical investigation of low energy band gap polymers: polythiophene systems

Recently, the organic synthesis and electronic device applications of π-conjugated polymer-based materials with low energy band gap (below 2 eV) and high values of incident photon to current efficiency have been presented. In the present study, the physical properties of polythiophene (PTH) and its derivative systems (PTs) were investigated as π-conjugated low energy band gap polymers. Density functional theory with periodic boundary condition (PBC), the B3LYP functional, and the 6-31G(d) basis set was applied to determine their geometric and electronic structures and corresponding energies (E _HOMO, E _LUMO, and E _g = E _LUMO ? E _HOMO) from the monomer of thiophene and its derivatives for one-dimensional (1D) extension to polymer. The effects of 3-substitution in PTs including electron-donating (CH₃–, C₆H₁₃–, OH–, Cl–, OCH₃–, and CHO–) and electron-withdrawing groups (Cl–, CHO–, CN–, NO₂–, CF₃–, and COOH–) compared with PTH were investigated. According to the calculation results, PTs with electron-donating and electron-withdrawing substituents should exhibit red- and blue-shifts, respectively, compared with PTH. These calculation results show good agreement with experimental data and provide further information for molecular design considerations.     

Molecular Engineering of Push–Pull Porphyrin Dyes for Highly Efficient Dye‐Sensitized Solar Cells: The Role of Benzene Spacers

Porphyrins have drawn much attention as sensitizers owing to the large absorption coefficients of their Soret and Q bands in the visible region. In a donor and acceptor zinc porphyrin we applied a new strategy of introducing 2,1,3‐benzothiadiazole (BTD) as a π‐conjugated linker between the anchoring group and the porphyrin chromophore to broaden the absorption spectra to fill the valley between the Soret and Q bands. With this novel approach, we observed 12.75 % power‐conversion efficiency under simulated one‐sun illumination (AM1.5G, 100 mW cm^?2). In this study, we showed the importance of introducing the phenyl group as a spacer between the BTD and the zinc porphyrin in achieving high power‐conversion efficiencies. Time‐resolved fluorescence, transient‐photocurrent‐decay, and transient‐photovoltage‐decay measurements were employed to determine the electron‐injection dynamics and the lifetime of the photogenerated charge carriers.