基于组合预测模型在高校招生人数预测中的应用研究

引进诱导有序加权平均算子,建立诱导有序加权平均组合预测模型,借助它对四川省普通高等学校招生人数进行预测.通过两个误差指标值的比较,说明这种方法的合理性,从而为教育部门制定相关的就业体制提供依据.     

Highly oriented and ordered microstructures in block copolymer films

Block copolymer (BCP) films with long-range lateral ordering and orientation are crucial for many applications. Here, we report a simple, versatile strategy based on a solution casting procedure, to produce millimeter thick film of BCPs with highly oriented nanostructures. Transmission electron microscope (TEM), small angle X-ray scattering (SAXS), and Hansen solubility parameters were used to study the morphology and interactions of the system. A variety of BCP-solvent pairs were investigated. Factors including set-up geometry, BCP characteristics, solvent evaporation, surface tension, and interactions, such as solvent-BCP, solvent-substrate, and BCP-substrate were examined. A mechanism is proposed to describe the observed long-range lateral ordering and orientation in films up to 1 mm in thickness. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1369–1375     

Synthesis and proton conductivity of sulfonated,multi‐phenylated poly(arylene ether)s

A series of sterically‐encumbered, sulfonated, poly(arylene ether) copolymers were synthesized and their proton conductivity examined. The series was prepared by copolymerizing a novel monomer, 2″,3″,5″,6″‐tetraphenyl‐[1,1′:4',1″:4″,1″':4″',1″″‐quinquephenyl]‐4,4″″‐diol, with 4,4'‐difluorobenzophenone and bisphenol A. Subsequent sulfonation and solution casting provided membranes possessing ion exchange capacities of 1.9 to 2.7 mmol/g and excellent mechanical properties (Young's modulus, 0.2–1.2 GPa; tensile strength, 35–70 MPa; elongation at break, 62–231%). Water uptake ranged from 34 to 98 wt% at 80 °C/100% RH. Proton conductivities ranged between 0.24 to 16 mS/cm at 80 °C/60% RH, and 3 to 167 mS/cm at 80 °C/95% RH. TEM analysis of the polymers, in the dehydrated state, revealed isolated spherical aggregates of ions, which presumably coalesce when hydrated to provide highly conductive pathways. The strategy of using highly‐encumbered polymer frameworks for the design of mechanically‐robust and dimensionally‐stable proton conducting membranes is demonstrated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2579‐2587     

Poly(aryl ether ketone) composite membrane as a high‐performance lithium‐ion batteries separator

We described the design and synthesis of a modified poly(aryl ether ketone) bearing phenolphthalein and allyl groups (P‐PAEK) via nucleophilic polycondensation. A new kind of composite separator, crosslinked P‐PAEK/polyvinylidene fluoride (c‐P‐PAEK/PVDF) membrane was successfully prepared using phase separation, phase inversion method, and UV crosslinking technique. As a separator of lithium‐ion battery, c‐P‐PAEK/PVDF membrane demonstrates high porosity and uniform distribution of pores with interconnected pathways. Low thermal shrinkage, distinct shut‐down effect, high liquid electrolyte uptake capacity, and exciting liquid electrolyte wettability of the prepared c‐P‐PAEK/PVDF membrane have been revealed through comprehensive study. Moreover, the c‐P‐PAEK/PVDF membrane was applied to assemble a conventional Li/LiFePO₄ coin cell, which exhibited hopeful cell performance. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2714–2721     

NONLINEAR DYNAMICS AND SYNCHRONIZATION OF TWO COUPLED PIPES CONVEYING PULSATING FLUID

In this paper, the nonlinear dynamical behavior of two coupled pipes conveying pulsating fluid is studied. The connection between the two pipes is considered as a distributed linear spring. Based on this consideration, the equations of motion of the coupled two-pipe system are obtained. The two coupled nonlinear partial differential equations, discretized using the fourth- order Galerkin method, are solved by a fourth-order Runge-Kutta integration algorithm. Results show that the connection stiffness has a significant effect on the dynamical behavior of the coupled system. It is found that for some parameter values the motion types of the two pipes might be synchronous.     

A Photo-Responsive Organogel Based on Pyrene-Substituted Acylhydrazone Derivative

A new simple pyrene-substituted acylhydrazone derivative, 4-(3,4-dioctyloxy) phenyl-1-pyrene acylhydrazone (PAH-8), was designed and synthesized. The PAH-8 can form thermo-reversible organogel in DMSO, and shows gelation-induced enhanced fluorescence emission. Xerogel exhibits ribbon-like fibrous aggregates with widths of 0.5-1 μm. The PAH-8 organogel indicates photo-responsive behaviors due to the trans-cis isomerizations of -C=N- bond upon exposure to visible or UV light. Upon visible light irradiation, the partial trans-cis isomerization of the -C=N- bond causes the fiber morphology to disappear, resulting in gel-sol transition, whereas the PAH-8 organogel exhibits few photoisomerizations from trans to cis transition without breakage of the gel state upon UV light irradiation.     

Improving the Flame Retardancy of Polybenzoxazines with a Reactive Phosphorus-Containing Compound

A novel flame retardant resin was prepared by modifying benzoxazines with a reactive phosphorus-containing compound, 2-(6-Oxido-6H-dibenzo[c,e][1,2]oxa-phosphorin-6-yl) 1,4-benzenediol (ODOPB). The curing reactions of the benzoxazines containing ODOPB (ODOPB-BOZ) and a type of bifunctional benzoxazine (B-BOZ) were investigated via differential scanning calorimetry. The ODOPB-BOZ precursors exhibited lower curing temperature in comparison with the B-BOZ. Through dynamic mechanical analysis tests, it was found that the glass transition temperature and storage modulus of the cured ODOPB-BOZ were lower than those of the cured B-BOZ. Moreover, the tensile and flexural properties of the cured ODOPB-BOZ were also lower than those of the cured B-BOZ. The TGA tests proved that, owing to the presence of ODOPB, the char yield of the polybenzoxazines were remarkably raised while the decomposition rates at higher temperature were reduced. It was found that the flame retardancy of cured ODOPB-BOZ attained V-0 grade upon the UL-94 tests while that of cured B-BOZ was V-1 grade. SEM images showed that more compact char layers were formed in the cured ODOPB-BOZ after combustion, resulting in the improvement of flame retardance.     

Influence of Bovine Bone Content on In Vitro Degradation of Poly-L-lactic Acid and Bovine Bone Composite Materials

In vitro degradation experiments of poly-L-lactic acid (PLLA) and bovine bone (BB) composites were carried out in a phosphate-buffered solution (PBS) at 37°C with a pH of 7.4. The influence of BB content on pH value of PBS, water uptake, molecular weights, molecular weight distributions, weight losses, mechanical strengths, and morphologies of PLLA/BB was investigated with degradation times. The results indicated that the presence of the BB modified the degradation of the PLLA matrix. The degradation rate of PLLA in the PLLA/BB composite was slower than the degradation rate of the sole PLLA material. Furthermore, the degradation rate of the composites became slower with the increasing content of BB in PLLA/BB composites.