数值误差对能斯特方程计算结果的影响

电势和浓度通过能斯特方程相互计算时,计算结果受对方数值误差的影响。本文通过误差传递和实例研究了这种影响。结果表明,浓度误差对电势计算值的影响小,而电势误差对浓度计算值的影响大;这种现象在电子转移数较多、电势较大时更加显著。浓度为计算目标时需要重视数值误差的影响,所以代入能斯特方程的电势值应该有足够精度,或者避免使用能斯特方程,而是通过平衡常数进行计算。电势为计算目标时,浓度误差的影响较小,因此可以通过近似手段估算浓度,然后代入能斯特方程,既简化计算,又保证精度。     

Magnetic Molecularly Imprinted Polymers for the Rapid and Selective Extraction and Detection of Methotrexatein Serum by HPLC-UV Analysis

In this work, novel selective recognition materials, namely magnetic molecularly imprinted polymers (MMIPs), were prepared. The recognition materials were used as pretreatment materials for magnetic molecularly imprinted solid-phase extraction (MSPE) to achieve the efficient adsorption, selective recognition, and rapid magnetic separation of methotrexate (MTX) in the patients’ plasma. This method was combined with high-performance liquid chromatography–ultraviolet detection (HPLC–UV) to achieve accurate and rapid detection of the plasma MTX concentration, providing a new method for the clinical detection and monitoring of the MTX concentration. The MMIPs for the selective adsorption of MTX were prepared by the sol–gel method. The materials were characterized by transmission electron microscopy, Fourier transform-infrared spectrometry, X-ray diffractometry, and X-ray photoelectron spectrometry. The MTX adsorption properties of the MMIPs were evaluated using static, dynamic, and selective adsorption experiments. On this basis, the extraction conditions were optimized systematically. The adsorption capacity of MMIPs for MTX was 39.56 mgg⁻¹, the imprinting factor was 9.40, and the adsorption equilibrium time was 60 min. The optimal extraction conditions were as follows: the amount of MMIP was 100 mg, the loading time was 120 min, the leachate was 8:2 (v/v) water–methanol, the eluent was 4:1 (v/v) methanol–acetic acid, and the elution time was 60 min. MTX was linear in the range of 0.00005–0.25 mg mL⁻¹, and the detection limit was 12.51 ng mL⁻¹. The accuracy of the MSPE–HPLC–UV method for MTX detection was excellent, and the result was consistent with that of a drug concentration analyzer.     

Crosstalk between Depression and Breast Cancer via Hepatic Epoxide Metabolism: A Central Comorbidity Mechanism

Breast cancer (BC) is a serious global challenge, and depression is one of the risk factors and comorbidities of BC. Recently, the research on the comorbidity of BC and depression has focused on the dysfunction of the hypothalamic–pituitary–adrenal axis and the persistent stimulation of the inflammatory response. However, the further mechanisms for comorbidity remain unclear. Epoxide metabolism has been shown to have a regulatory function in the comorbid mechanism with scattered reports. Hence, this article reviews the role of epoxide metabolism in depression and BC. The comprehensive review discloses the imbalance in epoxide metabolism and its downstream effect shared by BC and depression, including overexpression of inflammation, upregulation of toxic diols, and disturbed lipid metabolism. These downstream effects are mainly involved in the construction of the breast malignancy microenvironment through liver regulation. This finding provides new clues on the mechanism of BC and depression comorbidity, suggesting in particular a potential relationship between the liver and BC, and provides potential evidence of comorbidity for subsequent studies on the pathological mechanism.     

基于Tesla变压器和Blumlein线的低抖动重频脉冲发生器

为实现MV级多级气体开关精确触发控制, 提出了基于Tesla变压器和Blumlein线的低抖动重频脉冲发生器的电触发方案。完成了Tesla变压器与Blumlein线一体化设计;优化了初级回路结构及绝缘栅双极型晶体管触发控制电路, 减小了初级杂散电感, 缩短了变压器次级高电压建立时间及时延抖动;优化了百kV级自击穿气体开关工作参数, 研制出一套多级低抖动电晕稳定开关;将传统Blumlein线绝缘介质由变压器油更换成高介电常数的MIDEL7131新油, 增加了输出脉冲宽度, 进一步提高触发能力。最终研制出一台输出电压130 kV、脉冲宽度大于5 ns、重复频率50 Hz、连续工作时间1 min、输出抖动小于10 ns的紧凑型脉冲发生器。     

气体开关前沿陡化的实验研究

气体开关是脉冲功率技术中广泛应用的关键部件之一,高功率、高性能气体开关的技术研究及设计具有重要意义,陡化前沿是开关技术研究的重要内容。分析了气体开关的击穿机理和击穿通道的分布规律。对气体开关充分老练,开关击穿点和击穿通道将相对稳定,实验研究了开关间距和电场对脉冲前沿的影响。击穿电场较低时,减小开关间距有利于陡化脉冲前沿;击穿电场较大时（大于180 kV/cm）,开关间隙（电感）对输出脉冲前沿的影响减弱,气体开关的击穿电场成为影响输出脉冲前沿的关键因素。研究结果表明,增大开关的击穿场强,是陡化开关脉冲前沿的有效途径。     

采用2D-Haar声学特征超向量的快速特定音频识别方法

针对特定音频事件识别技术在大数据音频处理任务中的准确性和快速性问题,提出一种基于2D-Haar声学特征超向量和AdaBoost算法的快速特定音频事件泛化识别方法。首先将多个连续音频帧的常用声学特征构成“声学特征图”,进而提取维数高达数十万的Haar-like声学特征,然后使用AdaBoost.MH或速度较快的Random AdaBoost特征筛选算法,筛选出较高代表性的Haar-like声学特征模式组合,从而构成2D-Haar声学特征超向量;最后分析特定音频事件子类间的共性和差异性,提取子类别的共性,弱化子类间的差异,训练后得到一个泛化的音频事件模板,可支持多子类的泛化识别,能够准确检测并定位音频流中的特定音频事件。实验结果表明,使用2D-Haar声学特征超向量可以获得比MFCC,PLP,LPCC等常用声学特征约5%的识别精度提升、7~20倍的训练速度提升和5-10倍的识别速度提升,在网格法寻得最优参数配置下,可获得93.38%的准确率,95.03%的查全率,这为大数据量的特定音频事件识别提供了一种准确快速的处理方法。     

吲哚多样化环化合成咔唑衍生物研究进展

咔唑是一类特殊的含氮芳杂环分子,咔唑衍生物理化性质独特、结构多样,在天然产物、药物和功能材料领域有着广阔的应用,其合成方法一直备受关注.从吲哚直接环化到咔唑的合成方法简洁高效,原料廉价易得、产物种类多样.总结了近5年来以2,3-未取代吲哚为原料合成咔唑衍生物的方法,典型环化策略包含以下三种:[2+2'+2']环化反应、...     

带轴向温控仪的金属蒸气激光管径向温度场分析

对带轴向温控仪的金属蒸气激光放电管,建立了描述放电管径向温度场的简单数学模型.给出了由热辐射和热传导引起的径向温度变化的解析表达式,计算分析了轴向温控仪对激光管管壁温度和径向温度分布的作用机制.结果表明轴向温控仪可在一定范围内独立调节放电管管壁温度和减小激光管的径向温度梯度,可有效提高激光器运转效率和稳定性.     

细线径螺旋线长脉冲产生技术

提出了双路输出的螺旋脉冲形成线(PFL)结构,该结构内置用于充电的高耦合变压器,在螺旋PFL的两端各自输出一个脉冲,副路匹配输出时主路输出脉冲波形具有良好的平顶品质,主路输出脉冲能量占储能的大部分,解决了Korovin提出的螺旋PFL充电问题。对比分析双路输出的螺旋 PFL与SINUS-700/130两种技术路线,结果发现双路输出的螺旋 PFL改善了输出脉冲的平顶质量,输出功率提高29%,但是副路输出占用11%的储能,不易充分利用。     

Immobilization of carboxyl-modified multiwalled carbon nanotubes in chitosan-based composite membranes for U(VI) sorption

Journal of Radioanalytical and Nuclear Chemistry - The carboxyl-modified multiwalled carbon nanotubes were immobilized in chitosan-based composite membranes (CS-CNTs) which were used as efficient...