Comparison of bactericidal activities of silver nanoparticles with common chemical disinfectants

Engineered nanomaterials display significant advantages due to their unique nanostructure, along with their tuneable properties for the designed application. Silver nanoparticles (Ag-NPs) have drawn attention due to their use as potent bactericidal agents and were characterized in this research to provide an understanding of the interaction between nanomaterials and bacteria. This work presents the bactericidal performance of Ag-NPs using Escherichia coli (E. coli) as a model microorganism. Several state-of-the-art techniques, such as high-angle annular dark-field detector in scanning transmission electron microscopy, and energy filtered imaging in electron energy loss spectroscopy, were employed to obtain nanostructural and elemental information. The bactericidal activities of Ag-NPs were then compared with two commonly used disinfectants, sodium hypochlorite (NaClO) and phenol (C(6)H(5)OH). These two chemical disinfectants exhibited rapid bactericidal activity, showing a minimal bactericidal concentration (MBC) of 16 parts-per-million (ppm) and 16 part-per-thousand (ppth), respectively for NaClO and C(6)H(5)OH within about 10 min. In contrast, Ag-NPs exhibit slow but long-term bactericidal effect demonstrating MBCs of 0.6 parts-per-million (ppm) within 6h when used as disinfectant. An advantage using Ag-NPs to inactivate E coli at low dosages is negligible environmental waste or hazardous by-products. The results showed that Ag-NPs caused bacterial inactivation by a mechanism involving several steps, including cell wall and cytoplasmic membrane damage.     

The Effect of Pure Component Characteristic Parameters on Sanchez–Lacombe Equation‐of‐State Predictive Capabilities

The dependence of predictive capabilities of SL EOS on the pure characteristic parameters of monomers and polymers is investigated. A sensitivity analysis study is carried out to understand the effect of these parameters on the predictive capability of SL EOS for different α‐olefin/polyolefins systems. Among all pure component characteristic parameters, the monomer characteristic temperature (T*_monomer) has the largest impact on SL EOS predictive capability; whereas the polymer characteristic density (ρ*_polymer) is found to have the smallest impact.

     

Steady State Fluorescence Studies of Wild Type Recombinant Cinnamoyl CoA Reductase (Ll-CCRH1) and its Active Site Mutants

Fluorescence quenching and time resolved fluorescence studies of wild type recombinant cinnamoyl CoA reductase (Ll-CCRH1), a multitryptophan protein from Leucaena leucocephala and 10 different active site mutants were carried out to investigate tryptophan environment. The enzyme showed highest affinity for feruloyl CoA (K _a ?=?3.72?×?10⁵ M^?1) over other CoA esters and cinnamaldehydes, as determined by fluorescence spectroscopy. Quenching of the fluorescence by acrylamide for wild type and active site mutants was collisional with almost 100 % of the tryptophan fluorescence accessible under native condition and remained same after denaturation of protein with 6 M GdnHCl. In wild type Ll-CCRH1, the extent of quenching achieved with iodide (f _a?=?1.0) was significantly higher than cesium ions (f _a?=?0.33) suggesting more density of positive charge around surface of trp conformers under native conditions. Denaturation of wild type protein with 6 M GdnHCl led to significant increase in the quenching with cesium (f _a?=?0.54), whereas quenching with iodide ion was decreased (f _a?=?0.78), indicating reorientation of charge density around trp from positive to negative and heterogeneity in trp environment. The Stern-Volmer plots for wild type and mutants Ll-CCRH1 under native and denatured conditions, with cesium ion yielded biphasic quenching profiles. The extent of quenching for cesium and iodide ions under native and denatured conditions observed in active site mutants was significantly different from wild type Ll-CCRH1 under the same conditions. Thus, single substitution type mutations of active site residues showed heterogeneity in tryptophan microenvironment and differential degree of conformation of protein under native or denatured conditions.     

Sulfated Triterpenes from Lemon Balm

The hydroalcoholic (EtOH/H₂O) extract of matured leaf margins of lemon balm (Melissa officinalis L.) afforded a new 3,23‐disulfate of 2α,3β‐23,29‐tetrahydroxyolean‐12‐en‐28‐oic acid 28‐O‐β‐D ‐glucopyranoside ( 1 ) and a new 23‐monosulfate of 2α,23‐dihydroxyurs‐12‐en‐28‐oic acid 3‐O‐β‐D ‐glucopyranoside ( 2 ), along with six known compounds, i.e., 23‐monosulfate of 2α,3β,19α,23‐tetrahydroxyurs‐12‐ene‐28‐oic acid 28‐O‐β‐D ‐glucopyranoside ( 3 ), 3,5,6‐trihydroxydehydro‐α‐ionol 9‐O‐β‐D ‐glucopyranoside ( 4 ), quadranoside III ( 5 ), rosmarinic acid ( 6 ), caffeic acid ( 7 ), and luteolin ( 8 ). All the isolated compounds were evaluated for their antioxidant, antimicrobial, antimalarial, and cytotoxic activities. Only rosmarinic acid exhibited substantial antioxidant and antimicrobial activities, whereas sulfated terpenes showed considerably lower or no antimicrobial activity.     

Heterogeneous reusable catalyst,ultrasound energy,and no solvent: a quick and green recipe for one-pot synthesis of β-phosphonomalononitriles at room temperature

Clay-supported heteropolyacid catalyst has been prepared and investigated as a novel heterogeneous, reusable and efficient catalyst for the one-pot synthesis of β-phosphonomalononitriles under ultrasound irradiation at room temperature. Compared with traditional methods, the present method is solvent-free, works under milder and cleaner conditions, furnishes products with higher purity and yields, needs shorter reaction time, easier work-up procedure, and generates less waste. No column purification is required and the products can be purified by simple crystallization. The catalyst can be easily recovered and reused several times without significant loss of its catalytic activity. The catalyst was characterized by scanning electron microscopy, X-ray powder diffraction, and thermal gravimetric, surface area, and elemental analyses.     

Nickel(II) complexes of polyhydroxybenzaldehyde N4-thiosemicarbazones: synthesis, structural characterization and antimicrobial activities

Nickel(II) complexes with 2,3-dihydroxybenzaldehyde N4-substituted thiosemicarbazone ligands (H₃L¹–H₃L⁴) have been synthesized and characterized with the aim of evaluating the effect of N4 substitution in the thiosemicarbazone moiety on their coordination behavior and biological activities. Two series of nickel(II) complexes with the general formulae [Ni(H₃L)(H₂L)]ClO₄ and [Ni₂(HL)₂] were characterized by analytical and spectral techniques. The molecular structure of one of the complexes, namely, [Ni(H₃L⁴)(H₂L⁴)]ClO₄ was established by single crystal X-ray diffraction studies. The crystal structure of this complex revealed that two H₃L⁴ ligands are coordinated to nickel(II) in different modes; one as a neutral tridentate ONS ligand and the other is as a monoanionic tridentate (ONS^?) ligand. The antimicrobial activities of the compounds were tested against 25 bacterial strains via the disc diffusion method, and their minimum inhibitory concentration (MIC) and minimum microbicidal concentration were evaluated using microdilution methods. With a few exceptions, most of the compounds exhibited low-to-moderate inhibitory activities against the tested bacterial strains. However, the complexes [Ni₂(HL³)₂] (7) and [Ni₂(HL⁴)₂] (8) indicated higher inhibitory activity against Salmonella enterica ATCC 9068 (MIC values 15.7 and <15.7 μg/ml, respectively), compared with gentamicin as the positive control (MIC 25 μg/ml). Complex (7) also inhibited Streptococcus pneumoniae more efficiently (MIC 31.2 μg/ml), compared with gentamicin (MIC > 50 μg/ml). The toxicities of the compounds were tested on brine shrimp (Artemia salina), where no meaningful toxicity level was noted for both the free ligands and the complexes. The cytotoxicities of the compounds on cell viability were determined on MCF7, PC3, A375, and H413 cancer cells in terms of IC₅₀; complexes [Ni(H₃L³)(H₂L³)]ClO₄ (3), [Ni₂(HL³)₂] (7) and [Ni₂(HL⁴)₂] (8) exhibited significant cytotoxicity on the tested cell lines.     

A method for the low-level (ng/g) determination of perfluorooctanoate in carpet by LC-MS-MS using matrix extracted standards

Fluorotelomer-based acrylic polymers are applied to the surface of carpet to impart oil, stain, and water repellence properties. Concerns that fluorotelomer-based polymers are a possible source of "low level" exposure to humans, coupled with their widespread use have prompted the need to develop a method to detect and measure perfluorooctanoate (PFO) in carpet. A liquid chromatography tandem mass spectrometry method for the determination of PFO in carpet using a dual labeled 13C-perfluoroctanoic acid (13C-PFOA) internal standard is successfully developed and validated. Levels of PFO are determined using a gradient, reversed-phase high-performance liquid chromatography (HPLC) method with acetic acid acidified water-methanol, separated on a 50 mm Phenomenex Synergi Polar RP column. Ions monitored are 413 (parent) and 369 (daughter) for PFO and 415 (parent) and 370 (daughter) for dual labeled 13C-PFOA internal standard. Accuracy and precision over three days for 5 to 900 ng/g PFO in carpet ranged from 2.4% to 7.6% and 3.7% to 14.1%, respectively. Overall extraction efficiency for samples (n=30) fortified with 13C-PFOA at 20 ng/g and perfluorooctanoic acid (PFOA) at 5, 50, and 500 ng/g is 98.9%+/-8.1%. Specificity of the method was evaluated with two different carpet samples.     

Water promoted, microwave-assisted oxidative novel deamination of N-aminoquinazolinones

A novel deamination of 2-alkyl/aryl 3-amino-4（3H）-quinazolinones series using aqueous KMnO4 under thermal condition and microwave irradiation is described. Compared to thermal condition, significantly higher yields in much shorter times were observed for reactions under microwave irradiation. A plausible mechanism has been proposed for the oxidative water-promoted deamination.     

Multi-material bio-fabrication of hydrogel cantilevers and actuators with stereolithography

Cell-based biohybrid actuators are integrated systems that use biological components including proteins and cells to power material components by converting chemical energy to mechanical energy. The latest progress in cell-based biohybrid actuators has been limited to rigid materials, such as silicon and PDMS, ranging in elastic moduli on the order of mega (10(6)) to giga (10(9)) Pascals. Recent reports in the literature have established a correlation between substrate rigidity and its influence on the contractile behavior of cardiomyocytes (A. J. Engler, C. Carag-Krieger, C. P. Johnson, M. Raab, H. Y. Tang and D. W. Speicher, et al., J. Cell Sci., 2008, 121(Pt 22), 3794-3802, P. Bajaj, X. Tang, T. A. Saif and R. Bashir, J. Biomed. Mater. Res., Part A, 2010, 95(4), 1261-1269). This study explores the fabrication of a more compliant cantilever, similar to that of the native myocardium, with elasticity on the order of kilo (10(3)) Pascals. 3D stereolithographic technology, a layer-by-layer UV polymerizable rapid prototyping system, was used to rapidly fabricate multi-material cantilevers composed of poly(ethylene glycol) diacrylate (PEGDA) and acrylic-PEG-collagen (PC) mixtures. The incorporation of acrylic-PEG-collagen into PEGDA-based materials enhanced cell adhesion, spreading, and organization without altering the ability to vary the elastic modulus through the molecular weight of PEGDA. Cardiomyocytes derived from neonatal rats were seeded on the cantilevers, and the resulting stresses and contractile forces were calculated using finite element simulations validated with classical beam equations. These cantilevers can be used as a mechanical sensor to measure the contractile forces of cardiomyocyte cell sheets, and as an early prototype for the design of optimal cell-based biohybrid actuators.