Novel spectrophotometric method for determination of cinacalcet hydrochloride in its tablets via derivatization with 1,2-naphthoquinone-4-sulphonate

This study represents the first report on the development of a novel spectrophotometric method for determination of cinacalcet hydrochloride (CIN) in its tablet dosage forms. Studies were carried out to investigate the reaction between CIN and 1,2-naphthoquinone-4-sulphonate (NQS) reagent. In alkaline medium (pH 8.5), an orange red-colored product exhibiting maximum absorption peak (λ _max) at 490 nm was produced. The stoichiometry and kinetic of the reaction were investigated and the reaction mechanism was postulated. This color-developing reaction was employed in the development of a simple and rapid visible-spectrophotometric method for determination of CIN in its tablets. Under the optimized reaction conditions, Beer's law correlating the absorbance with CIN concentration was obeyed in the range of 3 - 100 μg/ml with good correlation coefficient (0.9993). The molar absorptivity (ε) was 4.2 × 10⁵ l/mol/cm. The limits of detection and quantification were 1.9 and 5.7 μg/ml, respectively. The precision of the method was satisfactory; the values of relative standard deviations (RSD) did not exceed 2%. No interference was observed from the excipients that are present in the tablets. The proposed method was applied successfully for the determination of CIN in its pharmaceutical tablets with good accuracy and precisions; the label claim percentage was 100.80 - 102.23 ± 1.27 - 1.62%. The results were compared favorably with those of a reference pre-validated method. The method is practical and valuable in terms of its routine application in quality control laboratories.     

Effect of curcumin on liposome: curcumin as a molecular probe for monitoring interaction of ionic liquids with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine liposome

Recent increase and wider use of ionic liquids (ILs) for various applications has drawn attention to their toxicological consequence on human health. The present study explores effects of three different kinds of widely used ILs, such as 1‐methyl‐3‐octylimidazolium chloride, 1‐buytl‐3‐methyl imadazolium tetrafluoroborate and 1‐benzyl‐3‐methyl imidazolium tetrafluoroborate, on liposome properties of 1,2‐dipalmitoyl‐sn‐glycero‐3‐phosphocholine (DPPC) by applying curcumin as molecular probe. Fluorescence intensity of curcumin is reported as a novel rotor which is sensitive to viscosity and thus the fluidity of the solvent. It follows a linear relationship of log fluorescence vs viscosity as proposed by Förster–Hoffmann equation. Curcumin binds strongly to liposome. At low concentration, the lipophilic drug curcumin does not appreciably influence the phase transition temperature of DPPC but as concentration reaches high levels significantly depresses the phase transition temperature. ILs diminish membrane fluidity. 1‐methyl‐3‐octylimidazolium chloride disorders membrane properties by lowering the phase transition as is observed for higher concentration of curcumin, but 1‐buytl‐3‐methyl imidazolium tetrafluoroborate and 1‐benzyl‐3‐methyl imidazolium tetrafluoroborate do not modify phase transition temperature perceptibly; rather they broaden the phase transition at low molar concentration ratio. The three different kinds of ILs under study behave similarly at a high IL:DPPC ratio (1:2), while they behave differently at lower ratios (1:10–1:5).     

Experimental evidence of photoinduced valence change of Fe3+ in BaTiO3 and mechanism for growth of new grating in depleted pump condition: An EPR investigation

With a view to understanding the role of photo-induced valence changes of impurities in BaTiO₃ in the phenomena of photorefraction, EPR experiments were conducted under in situ He-Ne laser illumination. These experiments gave evidence for photoinduced valence change of Fe in BaTiO₃ at room temperature. The EPR signal due to trivalent iron was found to reduce in intensity with laser illumination The kinetics of the valence change has been investigated. Under large fringe width condition, the time constant of the decay is identified as the dielectric relaxation time τ_d. The changes in line shape on laser illumination to Dysonian form, appeared most predominantly in mechanically poled crystal compared to electrically poled single domain crystals. This demonstrated the possible role of domain walls and the defects there, as source or sinks of charge carriers on photo excitation. It is observed, that there is transient growth of Fe³⁺, when the laser illumination was put on, before its decay. This was attributed to charge transfer between electrons in oxygen vacancies and Fe⁴⁺. This predicted the growth of a transient grating under depleted pump condition in a two beam coupling experiment. This was experimentally proved by following the diffracted signal of the reading beam under the depleted pump condition.     

Diurnal and Eleven- Year Variations of Neutron Component of Cosmic Rays

Cosmic ray ground observations are used together with the method of coupling coefficients to determine, by spectrographic method, the features of the variational primary energy spectrum of diurnal and eleven-year variations of neutron component of cosmic rays. It is found that the variational energy spectrum responsible for both types of variations can be best described by a constant spectrum up to an upper effective rigidity boundary. The upper cut-off effective rigidity boundary for the variational energy spectrum of diurnal variation was found to change from 105 GV at maximum solar activity to 15.85 GV at minimum solar activity. For Eleven-year variation, R_max was found to have a value of about 20 GV which changes slighly with solar activity due to the change of the coupling coefficients with solar activity.     

A pressure-based algorithm for multi-phase flow at all speeds

A new finite volume-based numerical algorithm for predicting incompressible and compressible multi-phase flow phenomena is presented. The technique is equally applicable in the subsonic, transonic, and supersonic regimes. The method is formulated on a non-orthogonal coordinate system in collocated primitive variables. Pressure is selected as a dependent variable in preference to density because changes in pressure are significant at all speeds as opposed to variations in density, which become very small at low Mach numbers. The pressure equation is derived from overall mass conservation. The performance of the new method is assessed by solving the following two-dimensional two-phase flow problems: (i) incompressible turbulent bubbly flow in a pipe, (ii) incompressible turbulent air–particle flow in a pipe, (iii) compressible dilute gas–solid flow over a flat plate, and (iv) compressible dusty flow in a converging diverging nozzle. Predictions are shown to be in excellent agreement with published numerical and/or experimental data.     

Novel addition in trifluoromethylation of [70]fullerene

Pyrolytic trifluoromethylation of [70]fullerene with CF₃CO₂Ag at 300 °C results in the addition of up to 12 CF₃ groups to the fullerene cage. Forty-six C₇₀(CF₃)_n derivatives (numbers in parentheses) were separated by two-stage high pressure liquid chromatography (HPLC) as follows: n = 2(2), 4(16), 6(9), 8(14) 10(5), some being characterised by NMR. The range of derivatives is much greater than for other [70]fullerene reactions, and as with [60]fullerene trifluoromethylation, no single derivative is dominant, indicating that kinetic stability mainly controls product formation. NMR spectra show most derivatives to be unsymmetrical, with combinations of quartets and septets (overlapping quartets) due to contiguous (‘linear’) addend arrays, having significantly different coupling constants of the ‘terminal’ quartets of between 9.1 and 17.7 Hz. These differences, together with those observed previously in trifluoromethylation of [60]fullerene are consistent with addition across both 6:6- and 5:6-ring junctions. Of the two C₇₀(CF₃)₂ isomers, one has either C_s or C₂ symmetry, the other has C₁ symmetry, whilst the C₇₀(CF₃)₄ derivatives fall into four categories: (i) symmetrical compounds (one gives only two singlets in the NMR); (ii) unsymmetrical compounds that show a ‘linear’ coupling sequence; (iii) unsymmetrical compounds having a remote pairs of adjacent groups; (iv) compounds having a coupled array of three CF₃ groups, together with a remote group suggesting sterically-driven migration. The first evaluation of differential NMR couplings across 6:6- and 5:6-bonds in a fullerene has been made using C₆₀F₆ as a model.     

C60F14OFPh3, a fluoroxy derivative of C60F15Ph3; evidence for the presence of ‘missing’ fluorine through restricted rotation of a phenyl group

From the reaction of C₆₀F₁₈ with benzene in the presence of SbCl₅ we have isolated a compound of 1252 amu indicated to be C₆₀F₁₄OFPh₃, a fluoroxyfullerene. Temperature-variable ¹H NMR shows that one phenyl group suffers restricted rotation on cooling to 218 K, attributed to the presence of the OF group which, as in the case of the recently characterised C₆₀F₁₇OF, fails to give a signal for this group in the ¹⁹F NMR. We have isolated also, C₆₀F₁₄O₂FPh₃ (1268 amu) a mixture of oxahomo derivatives of C₆₀F₁₄OFPh₃ arising from oxygen insertion into FCCF bonds. Theoretical calculations for C₆₀F₁₄OFPh₃ indicate that the phenyl group nearest to the OF group is twisted out of the plane containing the other two.