Economics of molasses to ethanol in India

Applied Biochemistry and Biotechnology -     

DLTS and in situ C–V analysis of trap parameters in swift 50 MeV Li3+ ion-irradiated Ni/SiO2/Si MOS capacitors

Ni/SiO₂/Si MOS structures were fabricated on n-type Si wafers and were irradiated with 50 MeV Li³⁺ ions with fluences ranging from 1×10¹⁰ to 1×10¹² ions/cm². High frequency C–V characteristics are studied in situ to estimate the build-up of fixed and oxide charges. The nature of the charge build-up with ion fluence is analyzed. Defect levels in bulk Si and its properties such as activation energy, capture cross-section, trap concentration and carrier lifetimes are studied using deep-level transient spectroscopy. Electron traps with energies ranging from 0.069 to 0.523 eV are observed in Li ion-irradiated devices. The dependence of series resistance, substrate doping and accumulation capacitance on Li ion fluence are clearly explained. The study of dielectric properties (tan δ and quality factor) confirms the degradation of the oxide layer to a greater extent due to ion irradiation.     

Differential etching of chalcogenides for infrared photonic waveguide structures

Chemical etching rates for two different chalcogenide glass compositions, As₄₀S₆₀ and As₂₄S₃₈Se₃₈, were studied using sodium hydroxide based etchant solutions. Etching was performed using a variation of standard photolithographic masking and wet-etching techniques. Variations in etch rate with NaOH concentration and glass composition were observed. The depth of etch was characterized using an optical profilometer. Etch rate differences as large as three orders of magnitude between these two glasses were observed at low NaOH concentration (0.053 M). We present a single variable etch rate curve of etch depth per time (nm/s) versus NaOH overall solution concentration (in M) for these two different chalcogenide glasses. This technology shows promise for fabricating photonic structures and has potential applications in fabricating novel photonic bandgap structures that will function in the long-wave infrared (LWIR) regime.     

Meticulous assessment of natural compounds from NPASS database for identifying analogue of GRL0617, the only known inhibitor for SARS-CoV2 papain-like protease (PLpro) using rigorous computational workflow

Molecular Diversity - The latest global outbreak of 2019 respiratory coronavirus disease (COVID-19) is triggered by the inception of novel coronavirus SARS-CoV2. If recent events are of any...     

Tactile devices to sense touch on a par with a human finger

Our sense of touch enables us to recognize texture and shape and to grasp objects. The challenge in making an electronic skin which can emulate touch for applications such as a humanoid robot or minimally invasive and remote surgery is both in mimicking the (passive) mechanical properties of the dermis and the characteristics of the sensing mechanism, especially the intrinsic digital nature of neurons. Significant progress has been made towards developing an electronic skin by using a variety of materials and physical concepts, but the challenge of emulating the sense of touch remains. Recently, a nanodevice was developed that has achieved the resolution to decipher touch on a par with the human finger; this resolution is over an order of magnitude improvement on previous devices with a sensing area larger than 1 cm(2). With its robust mechanical properties, this new system represents an important step towards the realization of artificial touch.     

Crystal-to-crystal transformations in heterometallic yttrium(III)-copper(I) iodide derivatives in a confined solvent-free environment: influence of solvated yttrium cations on the nuclearity and dimensionality of iodocuprate clusters

The solvated yttrium iodide precursors [Y(L)(8)]I(3) (L = DMSO or DMF), prepared in situ by stirring YI(3)(Pr(i)OH)(4) in DMSO or DMF, react with CuI in the presence of NH(4)I to give ionic hetero-metallic species [Y(DMSO)(8)][Cu(2)(mu-I)I(4)] (1) and [Y(DMF)(8)][Cu(4)(mu(3)-I)(2)(mu-I)(3)I(2)] (2) in excellent yields. Re-crystallization of 1 from DMF afforded the mixed-solvate complex [Y(DMSO)(6)(DMF)(2)][CuI(3)][I] (3). Compounds 2 and 3 undergo unique crystal-to-crystal transformation via progressive substitution of DMF by water molecules in a confined, solvent-free environment. Thus, crystals of 3 transform into [Y(DMSO)(6)(H(2)O)(2)][CuI(3)][I] (4), whereas a discrete ion-pair assembly of 2 is first converted into a 1-D zig-zag structure [Y(DMF)(6)(H(2)O)(2)](3+)[Cu(7)(mu(4)-I)(3)(mu(3)-I)(2)(mu-I)(4)(I)](1infinity)(3-) (5) and finally into a 2-D sheet containing mixed-valent copper atoms, [Y(DMF)(6)(H(2)O)(3)](3+)[Cu(I)(7)Cu(II)(2)(mu(3)-I)(8)(mu-I)(6)](2infinity)(3-) (6). The bi- and tetrafurcate H-bonding between water ligands on yttrium and iodides of the Cu-I cluster plays a pivotal role in the evolution of structures 4-6. Formation of a wide range of iodocuprate structures in 1-6, from discrete mono-, di- or tetranuclear units to one- and two-dimensional extended arrays, reflects the influence of solvated yttrium cations on the nuclearity and dimensionality of Cu-I clusters. TG-DTA-MS studies and DFT calculations for these complexes have also been carried out in order to determine their thermal stability and have insight about aforesaid transformations.     

Rapid and simple liquid chromatography tandem mass spectrometry method for the quantification of zidovudine in rat plasma

A high-performance liquid chromatography/electrospray ionization tandem mass spectrometry method was developed and validated for the quantification of zidovudine in rat plasma. Following solid-phase extraction, the analytes were separated using an isocratic mobile phase on a reverse phase column and analyzed by MS/MS in the multiple reaction monitoring mode using the respective [M+H]+ ions, m/z 268/127 for zidovudine and m/z 230/112 for the internal standard. The method exhibited a linear dynamic range of 5-500 ng/mL for zidovudine in rat plasma. The lower limit of quantification was 5 ng/mL with a relative standard deviation of less than 8%. Acceptable precision and accuracy were obtained for concentrations over the standard curve range. A run time of 1.5 min for each sample made it possible to analyze more than 400 plasma samples per day. The validated method was applied for pharmacokinetic studies of the novel drug delivery systems of zidovudine in rats.     

Spectrophotometric and column high-performance liquid chromatographic methods for simultaneous estimation of metoprolol tartrate and hydrochlorothiazide in tablets

Simple, accurate, economical, and reproducible UV spectrophotometric and column high-performance liquid chromatographic (HPLC) methods were developed for simultaneous estimation of a 2-component drug mixture of metoprolol tartrate and hydrochlorothiazide in combined tablet dosage form. The first method used the simultaneous equation method with 7 mixed standards and the absorption maxima at 223 and 271 nm, respectively, for metoprolol tartrate and hydrochlorothiazide in methanol. Linearity was observed in the concentration ranges of 4-24 and 2-16 microg/mL for metoprolol tartrate and hydrochlorothiazide, respectively. The developed HPLC method used a reversed-phase C18 column and methanol-water (95 + 5) mobile phase at an ambient temperature of 27 +/- 2 degrees C and UV detection at 225 nm; the run time was 10 min, and quantification was based on peak area. The injection repeatability and intraday and interday repeatability were calculated. Paracetamol was used as an internal standard for the HPLC method, and linearity was observed in the concentration range of 5-50 microg/mL for metoprolol and 2-20 microg/mL for hydrochlorothiazide. The proposed methods were successfully applied for the determination of metoprolol tartrate and hydrochlorothiazide in bulk powder and dosage form. The results obtained were analyzed statistically, and there was no significant difference between the 2 methods. The validation was performed according to International Conference on Harmonization guidelines.     

Solid- and solution phase transformations in novel hybrid iodoplumbate derivatives templated by solvated yttrium complexes

Solvated yttrium iodide precursors [Y(L)8]I3 [L = dimethylformamide (DMF) or dimethylsulfoxide (DMSO)], prepared in situ by stirring YI3(Pr(i)OH)4 in DMF/DMSO, react with 3 equiv of PbI2 in the presence of NH4I to give novel hybrid derivatives based on either a one-dimensional (1D) straight chain, [Y(DMF)8][Pb3(mu-I)9](1infinity) x DMF (1), or discrete pentanuclear iodoplumbates, [Y(DMSO)8]2[(DMSO)2Pb5(mu3-I)2(mu-I)8I6] (2a). The complex 2a and a closely related [Y(DMSO)8][Y(DMSO)7(DMF)][(DMSO)2Pb5(mu3-I)2(mu-I)8I6] (2b) were obtained in good yield by solution phase transformation of 1 in DMSO under slight different conditions. Derivatives 1 and 2 also undergo unique solid-state transformation in a confined environment of paratone to give 1D polymers based on zigzag iodoplumbate chains; crystals of 1 transform into [Y(DMF)6(H2O)2][Pb3(mu3-I)(mu-I)7I](1infinity) (3) via an exchange reaction, whereas those of 2a and 2b are converted into [Y(DMSO)7][Pb3(mu3-I)(mu-I)7I](1infinity) (4) via a decomposition pathway. The trifurcate H-bonding between water ligands on yttrium cation and iodide of the iodoplumbate anion plays a pivotal role in transforming the straight 1D polymeric Pb-I chain of 1 into a zigzag chain in 3. The thermogravimetry-differential thermal analysis studies indicate that complexes with DMF ligands are thermally more stable than those with DMSO ones, the mixed DMF-H2O ligand complex 3 being the most stable one because of the presence of strong H-bonding. Diffuse-reflectance UV-visible spectral analyses of 1-4 show an optical band gap in the 1.86-2.54 eV range, indicating these derivatives as potential semiconductors. In contrast to non-emissive 3 and 4, derivatives 1, 2a, and 2b show remarkable luminescent emission with peak maxima at 703 nm, assigned as an iodine 5p-lead 6s to lead 6p charge transfer (XM-M-CT).