Thermodynamic investigation on M–Te–O (M = Sc, Y) system

The standard Gibbs energy of formation of M₂TeO₆ and M₆TeO₁₂ (where M = Sc, Y), was determined from its vapor pressure measurements by employing thermogravimetry-based transpiration technique. This technique was validated by measuring the vapor pressure of well-studied substances such as TeO₂(s) and CdCl₂(s). The temperature dependence of the vapor pressure of TeO₂(g) over the mixtures M₆TeO₁₂ + M₂O₃ (where M = Sc, Y), generated by the incongruent vaporization reaction, M₆TeO₁₂(s) → 3M₂O₃(s) + TeO₂(g) + ½O₂(g) were measured in the temperature range 1,413–1,473 K and 1,623–1,743 K for Sc₆TeO₁₂(s) and Y₆TeO₁₂(s), respectively. Similarly, the vapor pressure of TeO₂(g) over the mixtures M₂TeO₆(s) + M₆TeO₁₂(s) generated by the vaporization reaction, 3M₂TeO₆(s) → M₆TeO₁₂(s) + 2TeO₂(g) + O₂(g) was measured in the temperature range (1,223–1,293 K) and (1,333–1,423 K) for Sc₂TeO₆(s) and Y₂TeO₆(s), respectively. From the vapor pressure measurements, the standard Gibbs energy of formation of M₆TeO₁₂ and M₂TeO₆ were derived.     

Synthesis and characterization of a novel copolymer of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) and application in heavy metal ion removal from water

We demonstrate synthesis of water insoluble, novel copolymer P_A1 from condensation of glyoxal dihydrazone and glyoxal dihydrazone bis(dithiocarbamate) monomers having high capacity to remove metal ions from aqueous solution. The presence of a high atomic percentage of nitrogen and sulfur atoms in P_A1 leads to strong ligating ability with metal ions. The monomers and the polymer have been characterized by FTIR, UV–Visible spectroscopy, CHNS elemental analysis, NMR, MALDI-MS, and TG/DTA. As a proof of concept, the P_A1 is tested for its ability to remove heavy metal ions Cu²⁺, Co²⁺, Fe²⁺, Ni²⁺, Mn²⁺, and CrO ₇ ^2? from aqueous solutions. P_A1 efficiently removed metals ions from the metal solutions. The highest absorption ability has been observed toward the iron salts where 0.969 g metal salt is absorbed by 1 g polymer. This study has implication for inexpensive and efficient polymer for purification of water.     

Thermal analysis of interaction between 2-PAM chloride and various excipients in some binary mixtures by TGA and DSC

Pralidoxime chloride known as 2-PAM chloride is used as antidote for nerve agent’s poisoning. This study was undertaken to establish the compatibility of 2-PAM chloride with a number of commonly used excipients by using thermoanalytical technique viz., differential scanning calorimetry (DSC) and thermogravimetry/differential thermogravimetry (TG/DTG) used in pharmaceutical formulation. The TG and DSC both results demonstrated that polyvinyl alcohol, polyacrylamide, microcrestline cellulose, hydroxypropyl cellulose, cellulose acetate, ethyl cellulose found to be compatible with 2-PAM chloride and chosen for the preparation of antidote against chemical warfare agents.     

Fabrication and characterization of electrochemical double layer capacitors using ionic liquid-based gel polymer electrolyte with chemically treated activated charcoal electrodes

The present investigation deals with electrochemical double layer capacitors (EDLCs) made up of ionic liquid (IL)-based gel polymer electrolytes with chemically treated activated charcoal electrodes. The gel polymer electrolyte comprising of poly(vinylidine fluoride-co-hexafluropropylene) (PVdF-HFP)–1-ethyl-2,3-dimethyl-imidazolium-tetrafluroborate [EDiMIM][BF₄]–propylene carbonate (PC)–magnesium perchlorate (Mg(ClO₄)₂) exhibits the highest ionic conductivity of ~8.4?×?10^?3?S?cm^?1 at room temperature (~20 °C), showing good mechanical and dimensional stability, suitable for their application in EDLCs. Activation of charcoal was done by impregnation method using potassium hydroxide (KOH) as activating agent. Brunauer–Emmett–Teller (BET) studies reveal that the effective surface area of treated activated charcoal powder (1,515 m²?g^?1) increases by more than double-fold compared to the untreated one (721 m²?g^?1). Performance of EDLCs has been tested using cyclic voltammetry, impedance spectroscopy, and charge–discharge techniques. Analysis shows that chemically treated activated charcoal electrodes have almost triple times more capacitance values as compared to the untreated one.     

One‐Pot,Three‐Component Synthesis of Novel Spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones in an Ionic Liquid as a Reusable Reaction Media

A facile one‐pot, three‐component protocol for the synthesis of novel spiro[3H‐indole‐3,2′‐thiazolidine]‐2,4′(1H)‐diones by condensing 1H‐indole‐2,3‐diones, 4H‐1,2,4‐triazol‐4‐amine and 2‐sulfanylpropanoic acid in [bmim]PF₆ (1‐butyl‐3‐methyl‐1H‐imidazolium hexafluorophosphate) as a recyclable ionic‐liquid solvent gave good to excellent yields in the absence of any catalyst (Scheme 1 and Table 2). The advantages of this protocol over conventional methods are the mild reaction conditions, the high product yields, a shorter reaction time, as well as the eco‐friendly conditions.     

Phase Transfer Catalyzed Peroxidation of Car Boxylic Acids with Potassium Persulfate

Aqueous solution of potassium persulfate converts water-insoluble carboxylic acids in ether (or dichloromethane), to peracids in a yield of 80–90% under the catalytic influence of benzyltriethylammonium chloride (BTEAC) or polyethyleneglycol (PEG-400). The reaction is further catalyzed kinetically in presence of a sulfonated polymer.     

Synthesis of Some Novel bis‐Spiro[indole‐pyrazolinyl‐thiazolidine]‐2,4′‐diones

The reaction of 1H‐indol‐2,3‐diones with 1,6‐dibromohexane has resulted in the formation of new 1H‐indol‐2,3‐diones‐1,1′‐(1,6‐hexanediyl)bis in quantitative yields. These compounds have been used for the synthesis of novel [3′‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl)spiro[3H‐indol‐3,2′‐thiazolidine]‐2,4′‐dione]‐1,1′‐(1,6‐hexanediyl)bis via bis Schiff's bases, [3‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl) imino‐1H‐indol‐2‐one]‐1,1′‐(1,6‐hexanediyl)bis.     

Isolation and biological evaluation of chromone alkaloid dysoline,a new regioisomer of rohitukine from Dysoxylum binectariferum

The chromone alkaloid dysoline (1), a new regioisomer of rohitukine (2) along with rohitukine and rohitukine-N-oxide (3) were isolated from the stem barks of Dysoxylum binectariferum. The structure of dysoline (1) was determined by extensive 2D-NMR studies and the absolute configuration was established by NOESY and CD spectra. Dysoline (1) consisted of a 5,7-dihydroxy-2-methylchromone nucleus substituted with a 2′-hydroxylated N-Me piperidine ring at the C-6 position. Dysoline differs from rohitukine by the position of the piperidine ring on the chromone nucleus. Dysoline displayed promising cytotoxicity in HT1080 fibrosarcoma cells with an IC₅₀ of 0.21 μM, and also displayed significant inhibition of proinflammatory cytokines TNF-α and IL-6.     

Enhanced dielectric and electro-optical properties of a newly synthesised ferroelectric liquid crystal material by doping gold nanoparticle-decorated multiwalled carbon nanotubes

In this article, a newly synthesised ferroelectric liquid crystal (FLC) material, namely LAHS 22, has been characterised. The characterisation of the FLC material has been performed using dielectric relaxation spectroscopy, differential scanning calorimetry and polarisation optical microscopy. We observed an enhancement in the dielectric and electro-optical properties of the FLC material by incorporating gold nanoparticles (GNPs)-decorated multiwalled carbon nanotubes (MWCNTs). The GNPs-decorated MWCNTs cause an increment in dielectric dispersion (up to kHz), absorption, spontaneous polarisation and rotational viscosity of the FLC material. The pure and GNPs-decorated MWCNTs doped FLC cells were analysed by means of various dielectric spectroscopic and optical measurements. The observed enhancement in the dielectric and electro-optical properties of the FLC material has also been studied with concentration of GNPs-decorated MWCNTs in FLC material. The GNPs-decorated MWCNTs/FLC composites are not only of fundamental importance, but also useful materials for device applications such as liquid crystal displays and memory devices.     

Computer modelling of the director configuration in a supertwist nematic liquid crystal cell

Abstract

The director distribution in a supertwist nematic cell, containing La-Roche liquid crystal mixture 3010, has been studied extensively using Berreman's computer simulation approach. It is seen that the director distribution in the cell depends critically on the total twist angle θ_t, the surface tilt angle θ_o and the ratio of the cell thickness to the pitch d/p. The values of θ_o and φ_t have been optimized to yield a small bistability (ΔV = 0.06 V) and a relatively large change in the midplane tilt angle (Δθ_m = 51°) in an unstrained cell with ?_t = (d/p) × 360°. The optimum values of θ_o and Ø_t were found to be 15° and 240°, respectively. The effect of varying d/p on the director distribution has also been studied in great detail in supertwist cells with θ_o = 30° and Ø_t = 270°. Some interesting features in understrained and overstrained cells have been observed.