Computer simulations of block copolymer tethered nanoparticle self-assembly

We perform molecular simulations to study the self-assembly of block copolymer tethered cubic nanoparticles. Minimal models of the tethered nanoscale building blocks (NBBs) are utilized to explore the structures arising from self-assembly. We demonstrate that attaching a rigid nanocube to a diblock copolymer affects the typical equilibrium morphologies exhibited by the pure copolymer. Lamellar and cylindrical phases are observed in both systems but not at the corresponding relative copolymer tether block fractions. The effect of nanoparticle geometry on phase behavior is investigated by comparing the self-assembled structures formed by the tethered NBBs with those of their linear ABC triblock copolymer counterparts. The tethered nanocubes exhibit the conventional triblock copolymer lamellar and cylindrical phases when the repulsive interactions between different blocks are symmetric. The rigid and bulky nature of the cube induces interfacial curvature in the tethered NBB phases compared to their linear ABC triblock copolymer counterparts. We compare our results with those structures obtained from ABC diblock copolymer tethered nanospheres to further elucidate the role of cubic nanoparticle geometry on self-assembly.     

Simultaneous determination of synthetic phosphodiesterase-5 inhibitors found in a dietary supplement and pre-mixed bulk powders for dietary supplements using high-performance liquid chromatography with diode array detection and liquid chromatography-electrospray ionization tandem mass spectrometry

A high-performance liquid chromatography-diode array detection (HPLC-DAD) method and a liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) method were developed to screen for the presence of synthetic phosphodiesterase-5 (PDE-5) inhibitors and their analogues, namely sildenafil, vardenafil, tadalafil, homosildenafil, acetildenafil and hydroxyhomosildenafil. The methods were applied to pre-market samples submitted to the Health Sciences Authority of Singapore (HSA) for testing. One sample was in the form of capsules while six other samples were pre-mixed bulk powder samples for dietary supplements to be repackaged or formulated into the final dosage forms (usually capsules). Identification of PDE-5 inhibitors and their analogues was achieved by comparing individual peak retention times, UV spectra and mass spectra with those of reference standards. The seven samples were found to contain at least one of the following compounds: sildenafil, vardenafil, hydroxyhomosildenafil, homosildenafil and acetildenafil. The five compounds were simultaneously determined by LC-ESI-MS/MS in multiple reactions monitoring (MRM) scan mode. The method has been validated for accuracy, precision, linearity and sensitivity.     

Calculation of vibronic couplings for phenoxyl/phenol and benzyl/toluene self-exchange reactions: implications for proton-coupled electron transfer mechanisms

The vibronic couplings for the phenoxyl/phenol and the benzyl/toluene self-exchange reactions are calculated with a semiclassical approach, in which all electrons and the transferring hydrogen nucleus are treated quantum mechanically. In this formulation, the vibronic coupling is the Hamiltonian matrix element between the reactant and product mixed electronic-proton vibrational wavefunctions. The magnitude of the vibronic coupling and its dependence on the proton donor-acceptor distance can significantly impact the rates and kinetic isotope effects, as well as the temperature dependences, of proton-coupled electron transfer reactions. Both of these self-exchange reactions are vibronically nonadiabatic with respect to a solvent environment at room temperature, but the proton tunneling is electronically nonadiabatic for the phenoxyl/phenol reaction and electronically adiabatic for the benzyl/toluene reaction. For the phenoxyl/phenol system, the electrons are unable to rearrange fast enough to follow the proton motion on the electronically adiabatic ground state, and the excited electronic state is involved in the reaction. For the benzyl/toluene system, the electrons can respond virtually instantaneously to the proton motion, and the proton moves on the electronically adiabatic ground state. For both systems, the vibronic coupling decreases exponentially with the proton donor-acceptor distance for the range of distances studied. When the transferring hydrogen is replaced with deuterium, the magnitude of the vibronic coupling decreases and the exponential decay with distance becomes faster. Previous studies designated the phenoxyl/phenol reaction as proton-coupled electron transfer and the benzyl/toluene reaction as hydrogen atom transfer. In addition to providing insights into the fundamental physical differences between these two types of reactions, the present analysis provides a new diagnostic for differentiating between the conventionally defined hydrogen atom transfer and proton-coupled electron transfer reactions.     

Detecting solid-state reactivity in 10-hydroxy-10,9-boroxophenanthrene using NMR spectroscopy

Solid-state NMR spectroscopy and computational methods are used to probe the transformation of 10-hydroxy-10,9-boroxophenanthrene to its corresponding anhydride in the solid state. DFT calculations are used to assist the assignment of the NMR spectra of both these boron-containing heteroaromatic compounds, in solution and in the solid state. Solid-state NMR spectroscopy reveals that the dehydration of crystalline 10-hydroxy-10,9-boroxophenanthrene proceeds at relatively low temperatures—a transformation, that is, undetectable by X-ray diffraction and gravimetric analysis. Computational methods are used to elucidate a plausible reaction pathway for this transformation and to explain its detection only by NMR methods.     

Structure and NMR assignment in AlPO4-15: A combined study by diffraction,MAS NMR and first-principles calculations

A multi-technique investigation involving X-ray diffraction, solid-state NMR and first-principle calculations was carried out on the aluminophosphate material AlPO₄-15. A synchrotron X-ray single-crystal diffraction study was carried out on the same sample as that used in solid-state NMR studies. The model from the single crystal study, together with a model from a literature high resolution study of the same material, was used as starting points for the first-principles calculations of the NMR parameters. This enabled the ³¹P and ²⁷Al NMR spectra to be unambiguously assigned and all the NMR parameters calculated agreed well with the experimental spectra even without relaxing the X-ray derived structural models.     

Single etch grating couplers for mass fabrication with DUV lithography

Surface grating couplers enable efficient coupling of light between optical fibers and planar waveguide circuits. While traditional grating designs require two etch steps for efficient coupling to silicon-on-insulator waveguides, recently proposed subwavelength structured gratings can achieve the same coupling efficiencies with a single etch step, thereby significantly reducing fabrication complexity. Here we demonstrate that such couplers can be fabricated on a large scale with ultra-violet lithography, achieving a 5?dB coupling efficiency at 1,550?nm. Through both simulations and experiments we give physical insight on how pattern fidelity impacts the performance of these couplers, and propose strategies to deal with inevitable process variations.     

Optimized light-matter interaction and defect hole placement in photonic crystal cavity sensors

Photonic crystal slab cavities were investigated for increased light-matter interaction based on selective placement of sublattice hole sized defect holes inside L3 cavities. A multiple-hole defect (MHD) consisting of three defect holes placed in the regions of highest cavity mode field intensity were demonstrated through finite-difference time-domain simulations and experiments to exhibit the strongest light-matter interaction without introducing significant scattering losses. Compared to an L3 cavity without defect holes, these strategically designed three-hole MHD cavities presented higher quality factor and more than double the resonance wavelength shift upon exposure to a thin oxide and two small chemical molecules.     

Photosubstitution in a trisheteroleptic ruthenium complex inhibits conjunctival melanoma growth in a zebrafish orthotopic xenograft model

In vivo data are rare but essential for establishing the clinical potential of ruthenium-based photoactivated chemotherapy (PACT) compounds, a new family of phototherapeutic drugs that are activated via ligand photosubstitution. Here a novel trisheteroleptic ruthenium complex [Ru(dpp)(bpy)(mtmp)](PF₆)₂ ([2](PF₆)₂, dpp = 4,7-diphenyl-1,10-phenanthroline, bpy = 2,2′-bipyridine, mtmp = 2-methylthiomethylpyridine) was synthesized and its light-activated anticancer properties were validated in cancer cell monolayers, 3D tumor spheroids, and in embryonic zebrafish cancer models. Upon green light irradiation, the non-toxic mtmp ligand is selectively cleaved off, thereby releasing a phototoxic ruthenium-based photoproduct capable notably of binding to nuclear DNA and triggering DNA damage and apoptosis within 24–48 h. In vitro, fifteen minutes of green light irradiation (21 mW cm⁻², 19 J cm⁻², 520 nm) were sufficient to generate high phototherapeutic indexes (PI) for this compound in a range of cancer cell lines including lung (A549), prostate (PC3Pro4), conjunctival melanoma (CRMM1, CRMM2, CM2005.1) and uveal melanoma (OMM1, OMM2.5, Mel270) cancer cell lines. The therapeutic potential of [2](PF₆)₂ was further evaluated in zebrafish embryo ectopic (PC3Pro4) or orthotopic (CRMM1, CRMM2) tumour models. The ectopic model consisted of red fluorescent PC3Pro4-mCherry cells injected intravenously (IV) into zebrafish, that formed perivascular metastatic lesions at the posterior ventral end of caudal hematopoietic tissue (CHT). By contrast, in the orthotopic model, CRMM1- and CRMM2-mCherry cells were injected behind the eye where they developed primary lesions. The maximally-tolerated dose (MTD) of [2](PF₆)₂ was first determined for three different modes of compound administration: (i) incubating the fish in prodrug-containing water (WA); (ii) injecting the prodrug intravenously (IV) into the fish; or (iii) injecting the prodrug retro-orbitally (RO) into the fish. To test the anticancer efficiency of [2](PF₆)₂, the embryos were treated 24 h after engraftment at the MTD. Optimally, four consecutive PACT treatments were performed on engrafted embryos using 60 min drug-to-light intervals and 90 min green light irradiation (21 mW cm⁻², 114 J cm⁻², 520 nm). Most importantly, this PACT protocol was not toxic to the zebrafish. In the ectopic prostate tumour models, where [2](PF₆)₂ showed the highest photoindex in vitro (PI > 31), the PACT treatment did not significantly diminish the growth of primary lesions, while in both conjunctival melanoma orthotopic tumour models, where [2](PF₆)₂ showed more modest photoindexes (PI ∼ 9), retro-orbitally administered PACT treatment significantly inhibited growth of the engrafted tumors. Overall, this study represents the first demonstration in zebrafish cancer models of the clinical potential of ruthenium-based PACT, here against conjunctival melanoma.

A new tris-heteroleptic photoactivated chemotherapy ruthenium complex induces apoptosis upon green light activation in a zebrafish orthothopic conjunctival melanoma xenograft model.     

Polyimide Compounds For Post-Lithium Energy Storage Applications

The exploration of cathode and anode materials that enable reversible storage of mono and multivalent cations has driven extensive research on organic compounds. In this regard, polyimide (PI)-based electrodes have emerged as a promising avenue for the development of post-lithium energy storage systems. This review article provides a comprehensive summary of the syntheses, characterizations, and applications of PI compounds as electrode materials capable of hosting a wide range of cations. Furthermore, the review also delves into the advancements in PI based solid state batteries, PI-based separators, current collectors, and their effectiveness as polymeric binders. By highlighting the key findings in these areas, this review aims at contributing to the understanding and advancement of PI-based structures paving the way for the next generation of energy storage systems.