A Modified Peng–Robinson Equation of State for Heavy Hydrocarbons

Russian Journal of Physical Chemistry A - A new simple and accurate functional form for an attractive parameter α is introduced for Peng–Robinson equation of state. The modified...     

Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate

Journal of Thermal Analysis and Calorimetry - In this investigation, a series of experiments were conducted to explore the effects of liquefied petroleum gas (LPG) mixture of 60% propane and 40%...     

Ammonium chloride-catalyzed green multicomponent synthesis of dihydropyrazine and tetrahydrodiazepine derivatives “on water”

Molecular Diversity - This research describes a simple and efficient one-pot synthetic approach for the preparation of tetrahydrodiazepine and dihydropyrazine (or dihydroquinoxaline) derivatives in...     

Study of Pion Transverse Momentum Distributions in Ultra-Relativistic Heavy Ion Collisions: A USTFM Approach

Journal of Experimental and Theoretical Physics - The mid-rapidity (|y| < 0.5) transverse momentum distributions of identified charged pions produced in different collision systems at...     

Effect of ion velocity on SHI-induced mixing in Ti/Bi system

Energetic ion beams are proving to be versatile tools for modification and depth profiling of materials. The energy and ion species are the deciding factor in the ion-beam-induced materials modification. Among the various parameters such as electronic energy loss, fluence and heat of mixing, velocity of the ions used for irradiation plays an important role in mixing at the interface. The present study is carried out to find the effect of the velocity of swift heavy ions on interface mixing of a Ti/Bi bilayer system. Ti/Bi/C was deposited on Si substrate at room temperature by an electron gun in a high-vacuum deposition system. Carbon layer is deposited on top to avoid oxidation of the samples. Eighty mega electron volts Au ions and 100?MeV Ag ions with same value of S_e for Ti are used for the irradiation of samples at the fluences 1?×?10¹³–1?×?10¹⁴ ions/cm². Different techniques like Rutherford backscattering spectroscopy, atomic force microscopy and grazing incidence X-ray diffraction were used to characterize the pristine and irradiated samples. The mixing effect is explained in the framework of the thermal spike model. It has been found that the mixing rate is higher for low-velocity Au ions in comparison to high-velocity Ag ions. The result could be explained as due to less energy deposition in thermal spike by high-velocity ions.     

Simultaneous removal of Cu2+ and Cr3+ ions from aqueous solution based on Complexation with Eriochrome cyanine‐R and derivative spectrophotometric method

TiO₂ nanoparticles deposited on activated carbon (TiO₂–NP–AC) was prepared and characterized by XRD and SEM analysis. Subsequently, simultaneous ultrasound‐assisted adsorption of Cu²⁺ and Cr³⁺ ions onto TiO₂‐NPs‐AC after complexation via eriochrome cyanine R (ECR) has been investigated with UV–Vis and FAA spectrophotometer. Spectra overlapping of the ECR‐Cu and ECR‐Cr complex was resolve by derivative spectrophotometric technique. The effects of various parameters such as initial Cu²⁺ (A) and Cr³⁺ (B) ions concentrations, TiO₂‐NPs‐AC mass (C), sonication time (D) and pH (E) on the removal percentage were investigated and optimized by central composite design (CCD). The optimize conditions were set as: 4.21 min, 0.019 mg, 20.02 and 13.22 mg L^?1 and 6.63 for sonication time, TiO₂–NP–AC mass, initial Cr³⁺ and Cu²⁺ ions concentration and pH, respectively. The experimental equilibrium data fitting to Langmuir, Freundlich, Temkin and Dubinin–Radushkevich models show that the Langmuir model is a good and suitable model for evaluation and the actual behavior of adsorption process and maximum adsorption capacity of 105.26 and 93.46 mg g^?1 were obtained for Cu²⁺ and Cr³⁺ ions, respectively. Kinetic evaluation of experimental data showed that the adsorption processes followed well pseudo second order and intraparticle diffusion models.     

Coulomb forces impacts on nanomaterial transportation within porous tank with lid walls

Journal of Thermal Analysis and Calorimetry - Electrical sensor has been considered in the current attempt. Combination of buoyancy, electric and radiative forces has been included in the governing...     

Complete Moment Convergence for the Dependent Linear Processes with Random Coefficients

In this paper, we investigate the complete moment convergence for dependent linear processes with random coefficients to form