Tunable local surface plasmon resonance in liquid-crystal-coated Ag nanoparticles

The far-field and near-field properties of a spherical nematic liquid crystal (NLC) coated metal nanoparticle (NPs) have been investigated in an external field, basing on the quasistatic theory. The resonant wavelength is tunable by varying metallic material of core, anisotropy extent and thickness of liquid crystals (LCs). The field enhancement is along the incident polarization near the outer surface of the shell. The direction of field is reverse in the inner surface comparing with the one if outer shell. In contrast to isotropy shell, the surface plasmon resonance (SPR) shows an obvious red shift and field enhancement near outer surface of the shell always is stronger.     

粘土担载的钼基催化剂的制备、结构及CO加氢合成醇性能

采用溶胶凝胶法与等体积浸渍相结合制备了一系列以粘土为载体的K-Co-Mo催化剂. 采用XRD、N₂等温吸脱附、H_{26+的还原,但对Mo⁴⁺和Co²⁺的还原没有明显的影响. 催化剂经还原后,在其表面生成了一种更低价态的Mo^δ+(1<δ<4)物种,被认为是合成醇的活性中心. 与非负载催化剂相比,粘土担载的K-Co-Mo具有更高的合成醇性能. 负载型催化剂具有较高的活性物种分散度,并且其介孔结构在一定程度上延长了合成醇反应中间体的滞留时间,从而促进了低碳醇的生成. 经773 K还原的催化剂具有较高的活性,其原因可为催化剂表面具有较高含量的Mo^δ+物种.}     

Electrochemical performance of modified artificial graphite as anode material for lithium ion batteries

Artificial graphite anode material was modified by coating an amorphous carbon layer on the particle surface via a sol-gel and pyrolysis route. The electrochemical measurements demonstrate that appropriate carbon coating can increase the specific capacity and the initial coulombic efficiency of the graphite material, while excessive carbon coating leads to the decrease in specific capacity. Thick coating layer is obviously unfavorable for the lithium ion diffusion due to the increased diffusion distance, but the decreased specific surface area caused by carbon coating is beneficial to the decrease of initial irreversible capacity loss. The sample coated with 5 wt.% glucose exhibits a stable specific capacity of 340 mAhg^?1. Carbon coating can remarkably enhance the rate capability of the graphite anode material, which is mainly attributed to the increased diffusion coefficient of lithium ion.     

Effects of locally resonant modes on underwater sound absorption in viscoelastic materials

Recently, by introducing locally resonant scatterers with spherical shape proposed in phononic crystals into design of underwater sound absorption materials, the low-frequency underwater sound absorption phenomenon induced by the localized resonances is observed. To reveal this absorption mechanism, the effect of the locally resonant mode on underwater sound absorption should be studied. In this paper, the finite element method, which is testified efficiently by comparing the calculation results with those of the layer multiple scattering method, is introduced to investigate the dynamic modes and the corresponding sound absorption of localized resonance. The relationship between the resonance modes described with the displacement contours of one unit cell and the corresponding absorption spectra is discussed in detail, which shows that the localized resonance leads to the absorption peak, and the mode conversion from longitudinal to transverse waves at the second absorption peak is more efficient than that at the first one. Finally, to show the modeling capability of FEM and investigate shape effects of locally resonant scatterers on underwater sound absorption, the absorption properties of viscoelastic materials containing locally resonant scatterers with ellipsoidal shape are discussed.     

相对论平均场理论中的有效超子-核子相互作用

利用相对论平均场理论,结合单超核的实验数据,研究了核介质中的Λ超子–核子有效相互作用.通过符合13ΛC超核中Λ超子1s轨道的结合能实验值,给出了5组Λ超子–核子有效相互作用参数.利用这些参数组对质量数从9到2?0?8的单Λ超核和核物质中最低Λ态的束缚能进行了系统计算,得到的结果与实验值相符.     

TiO2 Nanotube Array/Monolayer Graphene Film Schottky Junction Ultraviolet Light Photodetectors

Schottky junctions made from a titanium dioxide nanotube (TiO₂NT) array in contact with a monolayer graphene (MLG) film are fabricated and utilized for UV light detection. The TiO₂NT array is synthesized by the anodization and the MLG through a simple chemical vapor deposition process. Photoconductive analysis shows that the fabricated Schottky junction photodetector (PD) is sensitive to UV light illumination with good stability and reproducibility. The corresponding responsivity (R), photoconductive gain (G), and detectivity (D*) are calculated to be 15 A W^?1, 51, and 1.5 × 10¹² cm Hz^1/2 W^?1, respectively. It is observed that the fabricated PD exhibits spectral sensitivity and a simple power‐law dependence on light intensity. Moreover, the height of the Schottky junction diode is derived to be 0.59 V by using a low temperature I–V measurement. Finally, the working mechanism of the TiO₂NT array/MLG film Schottky junction PD is elucidated.     

Identification of functionally key residues in maltose transporter with an elastic network model-based thermodynamic method

Periplasmic binding protein-dependent maltose transport system (MBP-MalFGK₂) of Escherichia coli, an important member of the Adenosine triphosphate-binding cassette transporter superfamily, is in charge of the transportation of maltoses across cellular membrane. Studies have shown that this transport processes are activated by the binding of maltose and are accompanied by large-scale cooperative movements between different domains which are mediated by a network of important residues related to signal transduction and allosteric regulation. In this paper, the functionally crucial residues and long-range allosteric pathway of the regulation of the system by substrate were identified by utilising a coarse-grained thermodynamic method proposed by our group. The residues whose perturbations markedly change the binding free energy between maltoses and MBP-MalFGK₂ were considered to be key residues. In result, the key residues in 62 clusters distributed in different subdomains were identified successfully, and the results from our calculation are highly consistent with experimental and theoretical observations. Furthermore, we explored the long-range cooperation within the transporter. These studies will help us better understand the physical mechanism of the effects of the maltose on MBP-MalFGK₂ by long-range allosteric modulation.     

Large Strain Tensile Deformation and Failure in Oriented Isotactic Polypropylene/Clay Nanocomposite: Role of Voiding and Molecular Orientation

Plane strain compression of isotactic polypropylene iPP)/clay nanocomposite in a channel die at 140 and 160°C, respectively, has been adopted to prepare oriented samples with well-controlled structure for comparative studies. Molecular orientation in the amorphous phase, independent of clay loadings, decreases with increasing preparation temperature, whereas crystallographic orientation is nearly the same for all oriented samples. Severer voiding and void coalescence during stretching, mostly induced by the crystals and inter-chain sliding in the amorphous phase, respectively, is suggested to be responsible for higher volume dilatation and lower failure strain in the oriented samples prepared at higher temperature (e.g., 160°C). Fracture toughness is well correlated with the molecular orientation and crystal-dependent voiding in the oriented samples with respect to preparation temperatures. Furthermore, debonding of clay in the iPP matrix, especially in the oriented samples prepared at 140°C, is another contributor to the enhanced toughness.