Optical frequency counter based on two mode-locked fiber laser combs

This work demonstrates a semi-automatic optical frequency counter based on two mode-locked fiber laser combs. The mode number of the comb line involved in the optical frequency measurement is determined by operating the two laser combs at three different repetition rates, with two of them similar enough to have the same mode number of the beating comb lines. The determination of the mode number is independent of the frequency fluctuation of the laser under measurement. The whole measurement process was automated, except for the frequency stabilization of the laser combs and the optimization of the beat signal–to–noise ratio.     

Passively harmonic mode-locked erbium-doped fiber soliton laser with a nonlinear polarization rotation

Based on the nonlinear polarization rotation technique, we report on a stable passive 23rd harmonic mode-locked erbium-doped fiber soliton laser for the first time to the best of our knowledge. In this laser, 23 solitons are uniformly distributed in the cavity simultaneously, and all solitons have the same energy and duration. The increase of the coupler output enhances the dispersive radiation, and the longer cavity strengthens the interaction between solitons and dispersive waves. The two above factors play the key function to generate the 23rd harmonic mode-locked operation.     

掺杂PVK薄膜的荧光谱及电荷转移

根据PVK掺杂后荧光谱的变化，说明掺杂PVK薄膜的电致发光存在着从基质分子向掺杂分子的能量传递，用一个由单链模型扩展到包括杂质的哈密顿量进行数值求解，结果表明：在PVK和杂质分子之间有效的能量传递是源于它僮之间的电荷转移，且随着杂质浓度的变化，其荧光谱峰位的移动与掺杂前后系统总能量的改变及荧光谱强度与掺杂后转移的电荷数之间分别存在对应关系。该模型较好地解释了有关的实验结果。     

Pt/Ti Electrodes of PZT Thin Films Patterning by Novel Lift-Off Using ZnO as a Sacrificial Layer

We achieve a successful novel lift-off of patterning Pt/Ti electrodes on SiO2/Si substrates by employing ZnO sacrificial layer deposition and patterning, successive uniform Pt/Ti deposition and final lift-off. Then we deposit PZT thin films on the electrodes. Compared with the conventional lift-off processes for the electrodes, this novel process does not need post-annealing, which must be performed after conventional lift-off process. It is demonstrated that the electrodes patterned by the novel lift-off process have stronger adhesion. The electrodes and the PZT films on the electrodes are more compact and smoother than those by the conventional lift-off process.     

自由空间量子通讯实验中纠缠源的研制

设计了适合自由空间量子通讯实验的纠缠源. 纠缠光子对的单模光纤搜集率约为每秒20000对,水平竖直方向的纠缠对比度大于95%,正负45°方向的纠缠对比度大于90%. 在本地得到了大于100个标准偏差的Bell 不等式破缺. 满足20 km量级的自由空间量子通讯试验要求. 关键词： 纠缠光子对 位相匹配 收集效率 贝尔不等式     

激光加载下铝材料的冲击温度测量

利用神光Ⅱ装置上搭建的用于激光冲击波实验的温度诊断系统（该系统包括高时空分辨的扫描高温计和谱时分辨的扫描高温计）,以强激光加载铝材料冲击温度的测量,获得了铝材料冲击高温辐射发光谱的高时空分辨信号图像,结合灰体辐射理论模型,计算得到了冲击波速度19.06 km/s时铝材料的冲击温度达2.95 eV,该温度与SESAME库中冲击温度接近。研究结果表明采用该测温系统能够有效诊断金属材料的冲击温度,为后续进一步获取金属材料冲击温度数据奠定了基础。     

The facile in situ preparation and characterization of C/FeOF/FeF<Subscript>3</Subscript> nanocomposites as LIB cathode materials

C/FeOF/FeF₃ nanocomposite was synthesized by a facile in situ partial oxidation method. High-resolution transmission electron microscopy (HR-TEM) showed a special texture comprised of interpenetrating nanodomains of FeOF and FeF₃. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements revealed that the introduction of nanodomain FeOF enhanced both the electronic and ionic conductivity of the composite material. Therefore, the improvement of electron and lithium-ion dynamics resulted in the significant enhancement of the electrochemical performances of the material at ambient temperature. At a current density of 20 mA g^?1 within potential range 1.5–4.5 V, the specific capacities of the first ten circles were maintained at about 400 mAh g^?1 _. This material also exhibited excellent cycling capacity retention capability especially for high C rates. When the current density further increased to 100 and 200 mA g^?1, a steady capacity of 80 and 60 mAh g^?1 was observed, respectively. Furthermore, nearly no capacity loss was observed for the followed cycles. The discharge platforms based on intercalation and conversion reaction were also heightened by about 0.4 V, which increased the contribution of high voltage capacities. Compared to C/FeF₃, C/FeOF/FeF₃ is showing more of capacitive behavior, which also contributes to the high specific capacity delivered and is believed to be closely related to the enlarged nanodomain interfaces between two electrochemical active materials. An expansion-cracking-oxidation mechanism was proposed to explain the formation of this interpenetrating nanodomains of FeOF and FeF₃.     

Design of aspheric collimation system for semiconductor laser beam

In this paper, semiconductor laser beam collimation lenses system has been optimum simulated and designed. The new design methods for aspheric cylinder lenses collimation system have been discussed in detail and the system parameters are calculated and optimized by using a geometrical ray optics approximation. The optical system has been further simulated by software MATLAB, and the simulation results showed that the emergence angle can be collimated effectively, and the output beam can be expanded to a circular spot in centimeter level beam radius.     

基于室温脉冲量子级联激光器的NO气体检测中的光谱处理方法研究

报导了采用基于室温脉冲量子级联激光器的脉内光谱检测技术,利用中心波长为1904 cm^-1的量子级联激光器,在实验室对NO气体样品进行检测的研究结果. 针对单线直接吸收光谱反演算法进行了研究,介绍了基线拟合的最小二乘算法以获取其吸光度,根据HITRAN数据库中相应吸收谱线的吸收线强,采用扫描积分实现了气体浓度的反演,避免了标气标定造成的误差及污染;通过拟合残差分析得到了系统的检测限,达到34×10^-6 m. 关键词： 量子级联激光器 中红外 多项式拟合 扫描积分     

基于室温脉冲量子级联激光器的NO气体检测中的光谱处理方法研究

报导了采用基于室温脉冲量子级联激光器的脉内光谱检测技术,利用中心波长为1904 cm^-1的量子级联激光器,在实验室对NO气体样品进行检测的研究结果. 针对单线直接吸收光谱反演算法进行了研究,介绍了基线拟合的最小二乘算法以获取其吸光度,根据HITRAN数据库中相应吸收谱线的吸收线强,采用扫描积分实现了气体浓度的反演,避免了标气标定造成的误差及污染;通过拟合残差分析得到了系统的检测限,达到34×10^-6 m.