In this paper, poly(amide-6-b-ethylene oxide) (Pebax1657)/SAPO-34 mixed matrix membranes (MMMs) were prepared by solvent-evaporation method with acetic acid as a novel solvent. CO2, N2, CH4 and H2 permeation properties were investigated, and the physical properties of Pebax/SAPO-34 MMMs were characterized by XRD and SEM. At low SAPO-34 content, it was homogeneously distributed in the Pebax ma- trix, and then precipitated and agglomerated at high SAPO-34 content. The crystallinity of Pebax phase in Pebax/SAPO-34 MMMs decreased initially and then rebounded as a result of phase separation. With the increase of transmembrane pressure difference, CO2 permeability was en- hanced due to the effect of pressure-induced plasticization. Owing to the happening of stratification, the CO2 permeability of Pebax/SAPO-34 MMMs (50 wt% SAPO-34) increased to 338 Barrer from 111 Barrer of pristine Pebax, while the selectivities of CO2/CH4 and CO2/N2 were almost unchanged. Compared with the pristine Pebax, the gas separation performances of Pebax/SAPO-34 MMMs were remarkably enhanced. 相似文献
MnO has a high theoretical capacity, moderate discharge plateau, and low polarization when it is used as the anode material in lithium battery. However, the issues that limit its application are its poor conductivity and large volume changes, which can easily result in the collapse of electrode structure during long-term cycling. In the present work, a carbon-coated MnO/graphene 3D-network anode material is synthesized by an electrostatic adsorption of dispersed precipitates precipitation method. The MnO nanoparticles coated by carbon are uniformly distributed on the surface of graphene nanosheets and form a 3D sandwich-like nanostructure. A carbon layer is coated on the surface of MnO nanoparticles, which slows down the volume expansion in the process of lithium intercalation. The graphene nanosheets are cross-linked through carbons in this 3D nanostructure, which provides mechanical support and effective electron conduction pathways during the charge-discharge. The electrochemical tests indicate that the prepared 3D carbon-coated MnO/graphene electrode exhibits an excellent rate capacity of 1247.3 and 713.2 mAh g?1 at 100 and 1000 mA g?1, respectively. The capacity is 792.2 mAh g?1 after long cycle at a current density of 1000 mA g?1. The specific capacity is higher than that of MnO-based composite lithium anode materials currently reported. The superior rate and cycling performances are attributed to the unique 3D-network structure, which provides an effectively conductive network, buffers volume expansion, and prevents falling and aggregation of MnO in the charge and discharge process of the electrode materials. The 3D-structured carbon-coated MnO/graphene anode material will have an excellent application prospect.
To identify the detailed roles of water bridges in neonicotinoids recognition, twenty-four neonicotinoids compounds were designed, synthesized, bioassayed and modelled. Of all nine fragments mimicking water bridges, cyano group was the optimal one. The insecticidal activities indicated that the water bridge might be stable in the active site and was not suitable to be replaced by other groups, which highlighted the significance of water bridges for neonicotinoids. 相似文献
In this study, the poly(L-lactide)/poly(D-lactide)(PLLA/PDLA) blends with different optical purities of PLLA and various molecular weights of PDLA are prepared by solution mixing, and the stereocomplex formation and phase separation behaviors of these blends are investigated. Results reveal that optical purity and molecular weight do not vary the crystal structure of PLA stereocomplex(sc) and homochiral crystallites(hc). As the optical purity increasing in the blends, the melting temperature of sc(Tsc) and the content of sc(ΔHsc) increased, while the melting temperature of hc(Thm) hardly changes, although the content of hc(ΔHhm) decreased gradually. The Tsc and ΔHsc are also enhanced as the molecular weight of PDLA reduces, and the ΔHhm reduces rapidly even though the Thm does not vary apparently. With lower optical purities of PLLA and higher molecular weights of PDLA, three types of crystals form in the blends, i.e., PLA sc, PLLA hc and PDLA hc. As molecular weight decreases and optical purity enhances, the crystal phase decreases to two(sc and PDLA hc), and one(sc) finally. This investigation indicates that the phase separation behavior between PLLA and PDLA in the PLLA/PDLA blends not only depends on molecular weights, but also relies on the optical purities of polymers. 相似文献
Plants of the genus Siegesbeckia are annual herbs widely distributed in tropical and temperate zones and they are used as a traditional medicine to treat rheumatic arthritis, hypertension, malaria, neurasthenia and snake-bite in China. In previous papers, we reported on five new ent-kaurane and ent-pimarane diterpenoids, siegesbeckioside, siegesbeckiol and siegesbeckic acid1, orientalin A and B, and eight know compounds2,3. The present paper describes the isolation and structural elucidation … 相似文献
Some metabolites of fungi and plants containing perylenequinones have been used as folk medicine for the treatment of many diseases1,2. A filamentous fungus, Ascomy-cetes Hypocreaceae Hypomyces (Fr.) Tul. sp., was found from the northwestern mountains of Yunnan Province, and cultured successfully in the laboratory. A new perylenequinone, named hypomycin A (1), was isolated from its mycelia. In this paper the structure elucidation of 1 was described. Figure 1 The structure of compound 1 Fig… 相似文献