High throughput tryptic digestion via poly (acrylamide-co-methylenebisacrylamide) monolith based immobilized enzyme reactor

A poly (acrylamide-co-methylenebisacrylamide) (poly (AAm-co-MBA)) monolith was prepared by thermal polymerization in the 100 or 250 μm i.d. capillary. The monolithic support was activated by ethylenediamine followed by glutaraldehyde. Trypsin was then introduced to form an immobilized enzyme reactor (IMER). The prepared IMER showed a reliable mechanical stability and permeability (permeability constant K = 2.65 × 10⁻¹³ m²). With BSA as the model protein, efficient digestion was completed within 20 s, yielding the sequence coverage of 57%, better than that obtained from the traditional in-solution digestion (42%), which took about 12 h. Moreover, BSA down to femtomole was efficiently digested by the IMER and positively identified by matrix assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). To test the applicability of IMER for complex sample profiling, proteins extracted from Escherichia coli were digested by the IMER and further analyzed by nanoreversed phase liquid chromatography-electrospray ionization-mass spectrometry (nanoRPLC-ESI-MS/MS). In comparison to in-solution digestion, despite slightly fewer proteins were positively identified at a false discovery rate (FDR) of ∼1% (333 vs 411), the digestion time used was largely shortened (20 s vs 24 h), implying superior digestion performance for the high throughput analysis of complex samples.     

Preparation and characterization of attapulgite-silver nanocomposites,and their application to the electrochemical determination of nitrobenzene

Microchimica Acta - The surface of attapulgite was cleaned, modified with 3-aminpropyltriethoxysilane, and then covered with silver nanoparticles. The structure and morphology of the modified...     

Unusual enhancement in electrical conductivity of tin oxide thin films with zinc doping

Electrical conductivity of SnO(2)-based oxides is of great importance for their application as transparent conducting oxides (TCO) and gas sensors. In this paper, for the first time, an unusual enhancement in electrical conductivity was observed for SnO(2) films upon zinc doping. Films with Zn/(Zn + Sn) reaching 0.48 were grown by pulsed spray-evaporation chemical vapor deposition. X-Ray diffraction (XRD) shows that pure and zinc-doped SnO(2) films grow in the tetragonal rutile-type structure. Within the low doping concentration range, Zn leads to a significant decrease of the crystallite size and electrical resistivity. Increasing Zn doping concentration above Zn/(Zn + Sn) = 0.12 leads to an XRD-amorphous film with electrical resistivity below 0.015 ? cm at room temperature. Optical measurements show transparencies above 80% in the visible spectral range for all films, and doping was shown to be efficient for the band gap tuning.     

A novel fluorescent aptasensor for thrombin detection: using poly(m-phenylenediamine) rods as an effective sensing platform

In this communication, we develop a novel fluorescent aptasensor for thrombin detection with the use of poly(m-phenylenediamine) (PMPD) rods as an effective sensing platform. This aptasensor exhibits extraordinarily high sensitivity with a detection limit as low as 100 pM and excellent selectivity.     

Preparation of Ag nanoparticle-decorated poly(m-phenylenediamine) microparticles and their application for hydrogen peroxide detection

The chemical oxidation polymerization of m-phenylenediamine (MPD) by ammonium persulfate (APS) at room temperature results in the formation of poly(m-phenylenediamine) (PMPD) microparticles. The subsequent treatment of such microparticles with an aqueous AgNO(3) solution produces Ag nanoparticle (AgNP)-decorated PMPD microparticles. It was found that as-formed AgNPs exhibited remarkable catalytic performance toward the reduction of hydrogen peroxide (H(2)O(2)). The enzymeless H(2)O(2) sensor constructed with such composites showed a fast amperometric response time of less than 5 s, and the corresponding linear range and detection limit were estimated to be from 0.1 to 30 mM and 4.7 μM, respectively, at a signal-to-noise ratio of 3.     

Strong deaggregating effect of a novel polyamino resorcinarene surfactant on gold nanoaggregates under microwave irradiation

Gold nanoparticles were prepared by ethylene glycol (EG) reducing gold chloride under microwave irradiation. The EG-stabilized gold colloids varied from red to blue with increasing amounts of EG, due to particle aggregation. Addition of the macrocyclic polyamine 2,8,14,20-tetranonyl-4,6,10,12,16,18,22,24-octa(1-aminoethylcarbamoyl)methoxyresorcinarene (TNMR) reversed nanoparticle aggregation under microwave irradiation and greatly improved their dispersion stability in aqueous solutions. These effects are likely due to the amphiphilic nature of TNMR, which has a large hydrophilic headgroup with eight amino groups and four hydrophobic chains. Moreover, the large and flexible hydrophilic groups containing more N and O atoms in the TNMR molecule has a strong stretching and penetrating ability in the aqueous solution, and TNMR molecules can easily form a bilayer protecting structure on the surface of gold nanoparticles, which plays a critical role in the color-change process of the EG-stabilized gold colloid.     

<Emphasis Type="Italic">N</Emphasis>-(4-(quinazolin-2-yl)phenyl)benzamide derivatives with potent anti-angiogenesis activities: synthesis and evaluation

Expanding our studies on the anti-angiogenesis activities of 2,4-disubstituted quinazoline derivatives [8], a series of novel N-(2-(quinazolin-2-yl)phenyl)benzamide (SZ) derivatives were designed and synthesized. Cytotoxicity assays indicated that most of these compounds displayed similar cytotoxicity against tumor cells in comparison with our previously reported, but showed a higher cytotoxicity against HUVECs. The SZ derivatives showed a remarkable inhibitive effect against the migration and adhesion of HUVECs, in addition to demonstrating significant in vivo anti-angiogenesis activities in the chick embryo chorioallantoic membrane (CAM) assay. The results proved that the introduction of an aryl group with a basic amide side chain on the 4′ position linked to the amide of the C-2 substituted quinazoline scaffold is an effective approach to improve the anti-angiogenic activity of quinazoline derivatives.     

Efficient synthesis of pentasubstituted pyrroles via one-pot reactions of arylamines,acetylenedicarboxylates, and 3-phenacylideneoxindoles

An efficient synthetic method for the pentasubstituted pyrroles was successfully developed via the one-pot domino reactions of arylamines, acetylenedicarboxylates, and 3-phenacylideneoxindoles. The reaction mechanism involved the sequential Michael addition and ring closure of the in situ generated β-active enamino ester.     

Electrowetting of aligned carbon nanotube films

Electrowetting is one approach to reducing the interfacial tension between a solid and a liquid. In this method, an electrical potential is applied across the solid/liquid interface which modifies the wetting properties of the liquid on the solid without changing the composition of the solid and liquid phases. Electrowetting of aligned carbon nanotube (CNT) films is investigated by the sessile drop method by dispensing deionized (DI) water or 0.03 M NaCl droplets (contacted by Au wire) onto aligned CNT films assembled on a copper substrate. The results demonstrate that electrowetting can greatly reduce the hydrophobicity of the aligned CNTs; the contact angle saturation for DI water and 0.03 M NaCl droplets occurs at 98 and 50 degrees , respectively. The combined effects of the geometrical roughness and the electrical potential on the contact angle are briefly discussed and modeled. Such a strategy may be invoked to controllably reduce the interfacial tension between carbon nanotubes (CNTs) and polymer precursors when infiltrating the monomers into the prealigned nanotube films.