STUDY ON BIODEGRADABILITY OF POLY (3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE)/ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

1. INTRODUCTION Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been recognized as apotential environment-friendly substitute for traditional plastics. The structure, mechanicalproperties and biodegradability of PHBV as biodegradable plastic have been reported by many groups [1-3]. However, PHBV presents some problems, such as high cost, slow crystallization rate, relatively difficult processing and high degree of crystallinity. Therefore, it is difficult to use PHBV widel…     

Oxidation of Styrene with Molecular Oxygen in Supercritical CO2

The oxidation of styrene with molecular oxygen catalyzed by PdCl2 CuCl2 has been investigated in supercritical CO2 with a batch reactor. The oxidative system of styrene contains four components at the beginning and seven components during the reaction. The critical temperature, critical pressure, and critical density at different conversions are determined by using a high-pressure view cell. The effect of phase behavior on the conversion and selectivity were studied. Experimental results showed that the critical parameters of the reaction mixture at fixed initial molar ratio changed with the conversion of reactant. The conversion of styrene reached maximum near the critical density of the reaction mixture. Product selectivity also varied with density of reaction mixture and could be tuned to some degree.     

Spacial Structure of Cationic Phosphorus Ligand–Ru (II) Halide Complexes—by DFT Study

The increasing demand to produce enantio-pure pharmaceuticals, flavors, and other fine chemicals has advanced the field of asymmetry catalytic technologies. Among all asymmetry catalytic methods, catalytic enantioselective hydrogenation of unsaturated bonds such as olefins, ketones, and imines, which employs dihydrogen and small amounts of transition-metal complexes modified intrinsically by chiral ligands, is now recognized as being the most promising strategy for the synthesis of large amount…     

A Novel Green Synthesis of Quinolines through Acid-catalyzed Friedlander Reaction in Ionic Liquids

Quinoline derivatives were efficiently prepared through acid-catalyzed Friedlander reaction in ionic liquid ([bmim] [BF4]). It is shown that the proposed method is operationally simple and environmentally benign in that the reaction media and the catalyst can be recovered and be reused effectively for at least four times.     

A SAPO-11 Silicoaluminophosphate Molecular Sieve with Stable Crystal Structure

A SAPO-11 silicoaluminophosphate molecular sieve with stable crystal structure was synthesized for the first time. After removing template by calcination, its crystal space group still retains Icm2 which the as-synthesized has. The catalyst deriving from the present SAPO-I 1 materials shows higher isomerization selectivity and higher paraffin hydroisomerization yield than those reported elsewhere.     

X射线荧光分析中熔融制样条件的研究

本文研究了熔融制样时熔融温度、熔融时间和脱模剂的加入量对分析结果的影响。研究结果表明,随着熔融温度的升高和熔融时间的加长,分析结果的总值将随之增大。相反,脱模剂量的增加会使分析结果降低。通过对熔融样品时产生的升华物的研究,发现在熔触过程中,四硼酸锂比样品以更大的比例逸出熔融体,从而造成了样品在分析圆片中的相对浓缩。而且在高温熔融时,钾和钠比样品中的其他元素例如硅、铝、铁、钛、钙、镁等更易于逸失。制样条件的不同引起样品和熔剂逸失的比例会有变化,它直接影响测定的结果,这证明了在X射线荧光光谱分析中保持制样条件一致的重要性。     

微生物合成的β-羟基丁酸酯与β-羟基己酸酯共聚物/聚乳酸共混材料(PHBHHx/PLA)的力学性能与生物降解性研究

通过熔融共混法制备了聚乳酸/微生物产β-羟基丁酸酯与β-羟基己酸共聚物的共混物(PLA/PHBHHx)。采用拉伸力学试验研究了共混物的力学性能。通过土壤悬浊培养降解法和扫描电子显微镜(SEM)分析对共混材料的生物降解性能进行了研究。实验结果表明,随着PHBHHx含量的增加,共混物的拉伸强度和杨氏模量降低,而生物降解速率却显著提高。但是,在175h之前,重量组成比为20/80的共混物降解速率比纯PHBHHx还要快。综合分析表明,共混材料PLA/PHBHHx的重量比为20/80时,具有优良的力学性能和生物降解性。     

废弃生物质在超临界水中转化制氢过程的研究

以废弃生物质转化为富氢气体为目的，使用间歇式超临界水反应器，在反应温度773 K～923 K、压力15.5 MPa～34.5 MPa停留时间1 min～30 min和Ca/C摩尔比0～0.56范围内，对木屑在超临界水条件下生成的气体组成及产率进行了考察。实验表明，Ca/C摩尔比和温度对木屑转化的影响较大。当Ca/C摩尔比为0.48时，碳的气体转化率和氢气产率提高了近一倍。温度从773 K提高到923 K，碳的气体转化率由47％提高到76％，氢气产率由4.5 mmol/g上升到6.9 mmol/g。与温度相比，停留时间和压力的影响不大。     

一氧化二氮—乙炔火焰原子吸收法测定镍—镉浸渍液中硅

提出用一氧化二氮-乙炔火焰原子吸收法分析镍-镉浸渍液中硅.方法具有良好的灵敏度,干扰少,重现性好.硅量在5～50μg.ml~(-1)范围内与吸光度呈线性关系.测定样品中硅34.0μg.ml~(-1)(n=10)时,相对标准偏差为2.2%.标准加入回收率在98%～103%范围内,适用于镍-镉浸渍液中硅的分析.     

负载型镍金属催化剂上甲烷与二氧化碳重整制合成气

报道了负载型Ｎｉ金属催化剂的表面特征和对ＣＨ４与ＣＯ２重整制合成气的催化性能，反应结果和ＴＰＲ，ＸＲＣ结果表明：Ｎｉ担载量为９．０％的催化剂具有最佳的反应性能，Ｎｉ组分以高散表面化合物形式存在，助剂对催化剂活性的影响随载体和添加方式的不同较大差异，其中少量ＭｇＯ，Ｌａ２Ｏ３对改善催化剂的稳定性和抗积碳能力有十分显著的效果，载体和制备方法对催化剂性能具有明显影响，其中浸渍法制备的Ｎｉ／ＭｇＯ催化剂不