Thiazolium-mediated multicomponent reactions: a facile synthesis of 3-aminofuran derivatives

[reaction: see text] A facile synthesis of highly functionalized 3-aminofuran derivatives by the multicomponent reactions of thiazolium salts, aldehydes, and DMAD is described.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Study on the Silylation of Aromatic Hydrocarbons. The Trimethylsilylation of Naphthalene

Direct trimethylsilylation of naphthalene under certain condition has been found to afford substitution as well as addition products: 1-and 2-trimethylsilylnaphtalene (I, II), 1-trimethylsilyl-1,4-dihydronaphthalene (III), trans-1,2-bis(trimethylsilyl)-1,2-dihydronaphthalene (IV-a) and its isomer (IV-b), and 1,2,4-tris(trimethylsilyl)-1,2-dihydronaphthalene (V). The configuration has been determined by nmr spectroscopy, and the possible reaction path was proposed.     

Prediction of retention indexes. III. Silylated derivatives of polar compounds.

Polar compounds containing hydroxyl, amino and carboxyl groups, singly or in combination, can be chromatographed after the polar functional groups are silylated. The silylated derivatives of acids, alcohols, amines, diols, amino alcohols, amino acids are shown to behave chromatographically as hydrocarbons, and their retention indexes can be readily predicted from their base values. The column difference, namely, the difference between the retention indexes of the analyte on polar and non-polar columns is minimal for the silylated derivatives in comparison to that observed for the underivatized analytes. This minimal column difference is attributed to the hydrocarbon-like chromatographic characteristics of the silylated derivatives. The retention indexes of the silyl derivatives appear to correlate with the atom number Z of the analyte.     

Stationary phase evaluations of quantum rate constants

We compute the quantum rate constant based on two extended stationary phase approximations to the imaginary-time formulation of the quantum rate theory. The optimized stationary phase approximation to the imaginary-time flux-flux correlation function employs the optimized quadratic reference system to overcome the inaccuracy of the quadratic expansion in the standard stationary phase approximation, and yields favorable agreements with instanton results for both adiabatic and nonadiabatic processes in dissipative and nondissipative systems. The integrated stationary phase approximation to the two-dimensional barrier free energy is particularly useful for adiabatic processes and demonstrates consistent results with the imaginary-time flux-flux correlation function approach. Our stationary phase methods do not require calculation of tunneling paths or stability matrices, and work equally well in the high-temperature and the low-temperature regimes. The numerical results suggest their general applicability for calibration of imaginary-time methods and for the calculation of quantum rate constants in systems with a large number of degrees of freedom.     

Thermally responsive polymeric micellar nanoparticles self-assembled from cholesteryl end-capped random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide): synthesis, temperature-sensitivity, and morphologies

Cholesteryl end-capped thermally responsive amphiphilic polymers with two different hydrophobic/hydrophilic chain-length ratios were synthesized from the hydroxyl-terminated random poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) and cholesteryl chloroformate. The hydroxyl-terminated precursor polymers with narrow molecular weight distributions were synthesized by free-radical polymerization using 2-hydroxyethanethiol as a chain-transfer agent. The aqueous solutions of the cholesteryl end-capped copolymers exhibited reversible phase transitions at temperatures slightly above human body temperature, with the lower critical solution temperature values being 37.7 and 38.2 degrees C, respectively. The critical micelle concentration values of the two cholesteryl end-capped polymers were 9 and 25 mg/L, respectively. Polymeric micellar nanoparticles were prepared from the amphiphilic polymers using a dialysis method as well as a direct dissolution method. Transmission electron microscope studies showed that the micellar nanoparticles existed in different morphologies, including spherical, star-like, and cuboid shapes. Pyrene as a model hydrophobic compound could be readily encapsulated in these polymeric nanoparticles, at loading levels of 1.0 and 0.8 mg/g for the two cholesteryl end-capped polymers, respectively. The temperature sensitivity and unusual morphology of these novel polymeric nanoparticles would make an interesting drug delivery system.     

Conjugate addition of organocopper reagents in dichloromethane to α,β-unsaturated esters

Organocopper reagents in conjunction with Lewis acid activators provide greater stability than traditional cuprate reagents while maintaining the reactivity needed for conjugate addition reactions in dichloromethane. Whereas cuprates engage in cross-coupling pathways, organocopper nucleophiles are more selective for conjugate addition. The utility of organocopper reagents in dichloromethane for the conjugate addition to α,β-unsaturated esters is expanded upon herein.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

Synthesis, crystal structure and magnetic property of the novel dinuclear nickel(II) complex with 4-(p-methoxyphenyl)-3,5-bis(pyridine-2-yl)-1,2,4-triazole

A novel dinuclear nickel(II) complex, [Ni₂(MOBPT)₂Cl₂(H₂O)₂]Cl₂ · 7H₂O (MOBPT = 4-(p-methoxyphenyl) −3,5-bis(pyridine-2-yl)-1,2,4-triazole), has been synthesized and characterized by elemental analysis, IR and single crystal X-ray diffraction methods. The crystal structure determination shows that the dinuclear Ni₂N₈ unit is almost planer in which each Ni^II ion is coordinated by four nitrogen atoms from MOBPT equatorially and a water molecule and a chloride ion axially in a distorted octahedral geometry. Magnetic measurements reveal a relatively weak antiferromagnetic exchange in the complex.     

Synthesis and stereochemical assignment of 7-arylidene and 7-heteroarylidene morphinan-6-ones

A number of (E)-7-arylidenenaltrexones were synthesized by azeotropic distillation of water from a benzene solution of naltrexone and an aromatic aldehyde (benzaldehyde, 4-chloro- and 4-fluorobenzaldehyde, 3-and 4-pyridinecarboxaldehyde and 1-methyl-2-imidazolecarboxaldehyde) using piperidine as a catalyst. In addition, (E)-7-benzylidenenaloxone was prepared by the previously published Claisen-Schmidt condensation using sodium hydroxide in methanol. The stereochemistry of these arylidene derivatives 3–9 was determined to be (E) by means of nuclear Overhauser enhancement experiments. The ¹³C nmr spectra of (E)- 3–9 are recorded in deuteriochloroform and those of the hydrochlorides in deuteriodimethyl sulfoxide.