Cd2+ Counterion-Assisted Synthesis of Uniform CdS Nanospheres Capped with the Anionic Surfactant Sodium dodecylsulfate

Uniform cadmium sulfide (CdS) nanospheres were successfully prepared in the presence of the anionic surfactant sodium dodecylsulfate (SDS) at an appropriate concentration and relatively low temperature. Zeta potential data were collected for the three kinds of CdS particles to verify the existence of the Cd²⁺counterion on the CdS surface and Charge reversal; this was crucial for the explanation of how the anionic SDS surfactant molecules adsorbed on the negatively charged surface. Moreover, we confirmed that SDS had coated the surface of CdS nanospheres using infrared spectroscopy, and thermogravimetric analysis. An counterion assisted mechanism accounting for synthesis of CdS nanospheres could be widely used in the synthesis of nanomaterials if there is specific adsorption of the counterion. The CdS nanospheres showed good performance for the rapid adsorption of methylene blue.     

两步热化学分解水制氢用氧交换材料

氧交换材料是一种能够在惰性或还原气氛中快速释氧,而在弱氧化气氛下(如水蒸气)恢复氧的储氧材料。基于氧交换材料的太阳能热化学分解水制氢技术可实现太阳能向氢能的高效转化。该技术利用太阳能提供热量使氧交换材料高温释氧或被还原性气体还原,而后与水发生氧化反应生成纯氢。将氧交换材料制成透氧膜,在膜的两侧发生材料的释氧和氧恢复,同时实现纯氢的连续制备。本文详细论述了铁基氧化物、钙钛矿氧化物、镍基氧化物、铈基氧化物、无机透氧膜等氧交换材料的研究成果,重点介绍了基于不同反应体系氧交换材料的应用情况,并就提高铁基氧化物、钙钛矿氧化物等典型氧交换材料反应活性与循环稳定性的可能路径,构建高效透氧膜反应器的难点与发展方向等主要问题进行了探讨与展望。     

RP-HPLC法测定黑顺片中6种酯型生物碱的含量

建立黑顺片中6种酯型生物碱含量的高效液相测定方法。采用岛津C18色谱柱(250 mm×4.6 mm,5μm),以乙腈–四氢呋喃(体积比为25∶15)为流动相A,以0.1 mol/L乙酸铵溶液(每1 000 m L加冰乙酸0.5 m L)为流动相B梯度洗脱,流量为1.0 ml/min,检测波长为235 nm,柱温为35℃。苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱、新乌头碱、次乌头碱、乌头碱进样量分别在0.222~4.430,0.060~1.119,0.144~2.878,0.015~0.297,0.025~0.496,0.011~0.229μg范围内与色谱峰面积线性呈良好的线性关系,相关系数r均大于0.999 5,检出限分别为2.10,2.70,2.20,2.60,1.60,3.10 ng,样品在12 h内稳定。苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱、新乌头碱、次乌头碱、乌头碱的加标回收率分别为98.7%~102.2%,98.6%~102.3%,99.0%~101.9%,102.0%~97.3%,102.1%~98.3%,95.7%~103.5%,测定结果的相对标准偏差分别为2.5%,2.5%,2.2%,2.3%,2.2%,1.7%(n=6)。该方法简便,测定结果准确、可靠,可为黑顺片的质量评价和质量控制提供参考。     

Physical,hydrochemical and isotopic characteristics of springs in Beijing,China, compared to historical properties

A physical, hydrochemical and isotopic evaluation of springs in Beijing was conducted in 2009 to reveal apparent changes in the properties of those springs. The results showed that most of the 2nd class springs and more than 50 % of the 1st class springs recorded in the early 1980s were depleted, while the discharges of existing springs have also decreased sharply. In addition, the majority of springs were of the HCO₃–Ca–Mg type and good water quality, with the quality indices changing slightly compared to those recorded 30 years ago. The abundances of ²H, ¹⁸O, and ³H in the springs indicated that most of the springs were of meteoric origin with a relatively close connection to modern atmospheric precipitation. As a result, the springs have a relatively strong renewability within a shallow circulation.     

基于表面增强拉曼光谱的苹果毒死蜱残留无损检测方法

对表面增强拉曼光谱(Surface Enhanced Raman Spectroscopy, SERS)技术在苹果毒死蜱残留量无损快速准确检测中的应用进行了研究. 以银溶胶作为表面增强剂, 采用实验室搭建的拉曼光谱系统, 无损地采集苹果样品拉曼光谱. 分别采用二阶导数法(Secondary Derivative Transformation, SD)和极小极大值自适应缩放法(Min-max Signal Adaptive Zooming, MSAZ)扣除所得拉曼光谱的荧光背景以消除样品和环境的干扰, 从而提高检测的准确度. 对获取光谱后的苹果样品采用标准理化方法检测其毒死蜱含量, 在最优条件下, 建立拉曼光谱与15.52～0.064 mg/kg范围内毒死蜱含量的线性关系, 结果表明毒死蜱的两个主要特征峰强度和其浓度呈良好的线性关系, 预测集的相关系数为0.969, 预测均方根误差为1.24 mg/kg. 本研究所开发的方法为果蔬安全品质的无损快速检测提供了一种新思路.     

A Porous Tricyclooxacalixarene Cage Based on Tetraphenylethylene

A quadrangular prismatic tricyclooxacalixarene cage 1 based on tetraphenylethylene (TPE) was efficiently synthesized by a one‐pot S_NAr condensation reaction. As a result of the porous internal structure in the solid state, cage 1 exhibited a good CO₂ uptake capacity of 12.5 wt % and a high selectivity for CO₂ over N₂ adsorption of 80 (273 K, 1 bar) with a BET surface area of 432 m² g^?1. Formation of cage 1 led to the fluorescence of TPE being switched on in solution. The system was employed as a single‐molecule platform to study the mechanism of aggregation‐induced emission (AIE) by examining the restriction of intramolecular rotation (RIR).     

Cooperative Crystallization of Heterometallic Indium–Chromium Metal–Organic Polyhedra and Their Fast Proton Conductivity

Metal–organic polyhedra (MOPs) or frameworks (MOFs) based on Cr³⁺ are notoriously difficult to synthesize, especially as crystals large enough to be suitable for characterization of the structure or properties. It is now shown that the co‐existence of In³⁺ and Cr³⁺ induces a rapid crystal growth of large single crystals of heterometallic In‐Cr‐MOPs with the [M₈L₁₂] (M=In/Cr, L=dinegative 4,5‐imidazole‐dicarboxylate) cubane‐like structure. With a high concentration of protons from 12 carboxyl groups decorating every edge of the cube and an extensive H‐bonded network between cubes and surrounding H₂O molecules, the newly synthesized In‐Cr‐MOPs exhibit an exceptionally high proton conductivity (up to 5.8×10^?2 S cm^?1 at 22.5 °C and 98 % relative humidity, single crystal).     

Boronic Acid‐Based Carbohydrate Sensing

The covalent boron–diol interaction enables elaborate design of boronic acid‐based saccharide sensors. Over the last decade, this research topic has been well developed thanks to the integration of boronic acid chemistry with a range of techniques, including supramolecular chemistry, materials chemistry, surface modification, and nanotechnology. New sensing strategies and platforms have been introduced and remarkable progress has been achieved to fully utilize the unique property of boron–diol interaction and to improve the binding affinity towards different targets, especially under physiological conditions. In this review, the latest progress over the past 30 months (from late 2012 to early 2015) is highlighted and discussed to shed light on this versatile and promising platform for saccharide sensing.     

Study on preparation and properties of polyether polytriazole elastomers

To explore the application of click chemistry in the field of elastomer materials, propargyl-terminated ethylene oxide-tetrahydrofuran copolymer(PTP(E-co-T)) was prepared from hydroxyl-terminated ethylene oxide-tetrahydrofuran copolymer(P(E-co-T)) by end-etherisation modification. FTIR and 13C-NMR results indicate that P(E-co-T)-terminated hydroxyl was etherified thoroughly, yielding the target product PTP(E-co-T), and the content of terminated alkynyl of PTP(E-co-T) was evaluated to be 0.428 mmol·g-1. Using a polyazide compound as a cross-linker, polytriazole elastomers with various functional molar ratio(R) values were prepared from PTP(E-co-T) by virtue of the Cu AAC reaction. Mechanical property tests indicate that with the increase in R, the modulus E and stress σb of the polytriazole elastomers first increase and subsequently decrease, whereas the strain first decreases and later increases. The mechanical properties of the polytriazole elastomers show a parabolic dependence on the R value. Near the stoichiometric ratio, E and σb show maxima and the strain εb shows a minimum. Swelling tests demonstrate that the apparent molecular weight of polytriazole elastomer strands also first decreases and subsequently increases. At the stoichiometric ratio, the network structure possesses strands with a minimum apparent molecular weight and a maximum apparent density. Dynamic mechanical analysis reveals that the polytriazole elastomers presented damping peaks at approximately-64 °C, corresponding to the glass transition of copolyether strands, and the elastomer exhibited the lowest dissipation factor tanδ at the stoichiometric ratio. Thermal analysis suggests that the weight-loss process of the polytriazole elastomer is characteristic of one-step decomposition, and the elastomer begins to decompose from polyether strands, not triazole groups.