立方结构Fe基磁性材料弹性系数第一性原理计算

通过赝势平面波法(CASTEP)及全电势线性缀加平面波法(FLAPW)，以bcc-Fe为对象，研究第一性原理计算立方结构Fe基磁性材料弹性系数的方法，分析影响计算立方结构Fe基磁性材料弹性系数准确度的各项因素. 结果表明，在第一性原理弹性系数计算中，晶格常数是决定弹性系数计算准确度的关键因素；势函数的选择也会影响计算准确度. 使用全电势基矢的FLAPW法可以得到更为精准的弹性系数计算结果. 计算得到bcc-Fe的弹性系数C₁₁，C₁₂，C₄₄分别为246 GPa，121 GPa，113 GPa，与实验值基本一致. 利用本方法，计算了新型Fe-Ga磁致伸缩材料的弹性系数C₁₁，C₁₂，C₄₄分别为207 GPa，166 GPa及108 GPa. 关键词： 弹性系数 磁致伸缩材料 赝势平面波法 全电势线性缀加平面波法     

最近邻耦合网络的时空混沌同步研究

本文进行了最近邻网络的时空混沌同步研究.以时空混沌系统作为网络的节点,基于Lyapunov稳定性定理,通过确定网络的最大Lyapunov指数,得到了实现网络完全同步的条件.采用Fisher-Kolmogorov时空混沌系统作为网络节点实例进行了仿真模拟,获得了理想的同步效果.进一步研究了有界噪声影响下网络的同步性能,结果显示它具有较强的抗干扰能力.     

弱吸收基底上弱吸收薄膜的光学常数计算方法

采用一种相对简单而又精确的光度法来计算弱吸收基底上弱吸收薄膜的光学常数,为低损耗紫外薄膜的设计与实现提供了理论基础。采用JGS1型熔融石英基底,制备了MgF2与LaF3材料的单层膜,获得了JGS1型熔融石英基底及MgF2与LaF3薄膜的光学常数色散曲线。结果显示:在200 nm左右处,JGS1型熔融石英基底的吸收已经比较明显,消光系数在10-8量级,因此,应考虑基底的弱吸收,以提高薄膜光学常数的计算精度。     

弹道相机图像分析系统与普通扫描仪精确标定

研制该系统的目的是对弹道干板进行数字化、高精度、高自动化的判读,代替传统上低效率的人工判读方法。该系统使用普通平板扫描仪将弹道相机拍摄到的干板图像进行数字化并对扫描图像进行高精度的标定和修正,再利用数字图像处理技术对于板图像进行分析判读。着重叙述了用分布于待测图像四周的标准正交网络对包括待测图像在内的全场进行标定和修正的方法及实验结果。经过本方法标定和修正后,扫描图像几何标准偏差在2～3μm以内。该判读系统及所用到的扫描仪标定方法,实现了弹道干板的数字化、自动化的高精度判读,使普通扫描仪可用于精度要求极高的工程测量。     

Theoretical analysis on double Rayleigh backscattering noise in optical fibreRaman amplifiers and its suppression

In this paper, amplified double Rayleigh backscattering noise (DRB) in the optical fibre Raman amplifier is analysed. Expressions are presented for both forward pumping and backward pumping schemes. Calculation is performed to show the effective suppression of DRB noise by employing an optical isolator. The optimal position for the isolator is determined and is found to be insensitive to the power levels of the signals and pumps. The results show that a reduction of the DRB noise by almost 2 to 3 orders can be reached.     

牛血清白蛋白与金霉素结合反应的机制研究

以光谱技术与微量热技术相结合的方法研究水溶液中金霉素与牛血清白蛋白分子间结合作用的热力学性质 .荧光猝灭法测得该反应的结合常数K =2 .0 9× 10 5L/mol,结合位点数n =1.75 ,微量法测得反应的焓变△rHm=- 17.5 0kJ/mol;依据Forster非辐射能量转移机制 ,得到授体 受体间的结合距离 (r1=1.6 7nm ,r2 =1.4 6nm)和能量转移效率 (E1=0 .4 1,E2 =0 .6 6 ) .金霉素与牛血清白蛋白分子间有较强的结合作用 ,且结合力以疏水作用为主 .     

Concentric-ring structures in an atmospheric pressure helium dielectric barrier discharge

This paper performs a numerical simulation of concentric-ring discharge structures within the scope of a two-dimensional diffusion--drift model at atmospheric pressure between two parallel circular electrodes covered with thin dielectric layers. With a relative high frequency the discharge structures present different appearances of ring structures within different radii in time due to the evolvement of the filaments. The spontaneous electron density distributions help understanding the formation and development of self-organized discharge structures. During a cycle the electron avalanches are triggered by the electric field strengthened by the feeding voltage and the residual charged particles on the barrier surface deposited in the previous discharges. The accumulation of charges is shown to play a dominant role in the generation and annihilation of the discharge structures. Besides, the rings split and unify to bring and annihilate rings which form a new discharge structure.     

分子动力学模拟纯镁熔体凝固过程中结构演化

采用分子动力学模拟方法模拟了在周期性边界条件下由500个原子构成的液态Mg模型系统的凝固过程,分别考察了在5×10^14 K/s、5×10^13 K/s、1×10^13 K/s 、1×10^12 K/s的冷却速率下液态Mg熔体的凝固行为。模拟结果很好地重现了实验值。模拟中原子间作用势采用FS势,结构分析采用径向分布函数、均方位移、系统总能量分析、H-A键对分析技术等方法。结果表明,当冷却速率为5×10^14 K/s时,系统形成以1541键对为主的非晶态结构;当冷却速率分别为5×10^13 K/s、1×10^13 K/s、1×10^12 K/s时,系统形成以1421、1422键对为主的hcp晶态结构;另外,在快速冷却形成非晶的过程中,大部分bcc结构被保留下来,而在慢冷形成晶态的过程中,大部分bcc结构最终演化形成了hcp结构。     

Anti-BZ-Structure in Effect Algebras

The definitions of sharply approximating effect algebras, anti-BZ-effect algebras, central approximating effect algebras, and S-anti-BZ-effect algebras are given, the relationships between sharply approximating effect algebras and anti-BZ-effect algebras, between central approximating effect algebras and anti-BZ-effect algebras are established, and the set of anti-BZ-sharp elements in S-anti-BZ-effect algebras is proved to be an orthomodular lattice.     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.