Monosaccharides as Versatile Units for Water‐Soluble Supramolecular Polymers

We introduce monosaccharides as versatile water‐soluble units to compatibilise supramolecular polymers based on the benzene‐1,3,5‐tricarboxamide (BTA) moiety with water. A library of monosaccharide‐based BTAs is evaluated, varying the length of the alkyl chain (hexyl, octyl, decyl and dodecyl) separating the BTA and saccharide units, as well as the saccharide units (α‐glucose, β‐glucose, α‐mannose and α‐galactose). In all cases, the monosaccharides impart excellent water compatibility. The length of the alkyl chain is the determining factor to obtain either long, one‐dimensional supramolecular polymers (dodecyl spacer), small aggregates (decyl spacer) or molecularly dissolved (octyl and hexyl) BTAs in water. For the BTAs comprising a dodecyl spacer, our results suggest that a cooperative self‐assembly process is operative and that the introduction of different monosaccharides does not significantly change the self‐ assembly behaviour. Finally, we investigate the potential of post‐assembly functionalisation of the formed supramolecular polymers by taking advantage of dynamic covalent bond formation between the monosaccharides and benzoxaboroles. We observe that the supramolecular polymers readily react with a fluorescent benzoxaborole derivative permitting imaging of these dynamic complexes by confocal fluorescence microscopy.     

Dual Palladium(II)/Tertiary Amine Catalysis for Asymmetric Regioselective Rearrangements of Allylic Carbamates

The streamlined catalytic access to enantiopure allylic amines as valuable precursors towards chiral β‐ and γ‐aminoalcohols as well as α‐ and β‐aminoacids is desirable for industrial purposes. In this article an enantioselective method is described that transforms achiral allylic alcohols and N‐tosylisocyanate in a single step into highly enantioenriched N‐tosyl protected allylic amines via an allylic carbamate intermediate. The latter is likely to undergo a cyclisation‐induced [3,3]‐rearrangement catalysed by a planar chiral pentaphenylferrocene palladacycle in cooperation with a tertiary amine base. The otherwise often indispensable activation of palladacycle catalysts by a silver salt is not required in the present case and there is also no need for an inert gas atmosphere. To further improve the synthetic value, the rearrangement was used to form dimethylaminosulfonyl‐protected allylic amines, which can be deprotected under non‐reductive conditions.     

An Enantioselective Assembly of Dihydropyranones through an NHC/LiCl‐Mediated in situ Activation of α,β‐Unsaturated Carboxylic Acids

A straightforward N‐heterocyclic carbene (NHC)/LiCl‐mediated synthesis of dihydropyranones from α,β‐unsaturated carboxylic acids and 1,3‐dicarbonyl compounds was realized through the in situ activation strategy. The key advantages of this protocol include ready availability and high stability of starting materials, good yields, and excellent enantioselectivity.     

Graphene Oxide/Polyacrylamide/Aluminum Ion Cross‐Linked Carboxymethyl Hemicellulose Nanocomposite Hydrogels with Very Tough and Elastic Properties

Development of high‐strength hydrogels has recently attracted ever‐increasing attention. In this work, a new design strategy has been proposed to prepare graphene oxide (GO)/polyacrylamide (PAM)/aluminum ion (Al³⁺)‐cross‐linked carboxymethyl hemicellulose (Al‐CMH) nanocomposite hydrogels with very tough and elastic properties. GO/PAM/Al‐CMH hydrogels were synthesized by introducing graphene oxide (GO) into PAM/CMH hydrogel, followed by ionic cross‐linking of Al³⁺. The nanocomposite hydrogels were characterized by means of FTIR, X‐ray diffraction (XRD), and scanning electron microscopy/energy‐dispersive X‐ray analysis (SEM‐EDX) along with their swelling and mechanical properties. The maximum compressive strength and the Young's modulus of GO_3.5/PAM/Al‐CMH_0.45 hydrogel achieved values of up to 1.12 and 13.27 MPa, increased by approximately 6488 and 18330 % relative to the PAM hydrogel (0.017 and 0.072 MPa). The as‐prepared GO/PAM/Al‐CMH nanocomposite hydrogels possess high strength and great elasticity giving them potential in bioengineering and drug‐delivery system applications.     

A Surfactant‐Encapsulating Polyoxometalate Nanowire Assembly as a New Carrier for Nanoscale Noble‐Metal Catalysts

The loading of noble‐metal nanoparticles (NMNPs) onto various carriers to obtain stable and highly efficient catalysts is currently an important strategy in the development of noble metal (NM)‐based catalytic reactions and their applications. We herein report a nanowire supramolecular assembly constructed from the surfactant‐encapsulating polyoxometalates (SEPs) CTAB‐PW₁₂, which can act as new carriers for NMNPs. In this case, the Ag NPs are loaded onto the SEP nanowire assembly with a narrow size distribution from 5 to 20 nm in diameter; the average size is approximately 10 nm. The Ag NPs on the nanowire assemblies are well stabilized and the over agglomeration of Ag NPs is avoided owing to the existence of well‐arranged polyoxometalate (POM) units in the SEP assembly and the hydrophobic surfactant on the surface of the nanowire assembly. Furthermore, the loading amount of the Ag NPs can be adjusted by controlling the concentration of the AgNO₃ aqueous solution. The resultant Ag/CTAB‐PW₁₂ composite materials exhibit high activity and good stability for the catalytic reduction of 4‐nitrophenol (4‐NP) with NaBH₄ in isopropanol/H₂O solution. The NMNPs‐loaded SEP nanoassembly may represent a new composite catalyst system for application in NM‐based catalysis.     

A simple and high‐resolution HPLC‐PDA method for simultaneous quantification of local anesthetics in in vitro buccal permeation enhancement studies

A simple, isocratic, high‐resolution and prompt HPLC‐PDA method was developed and validated for the simultaneous quantification of prilocaine (PCL) and lidocaine (LCL) hydrochlorides in in vitro buccal iontophoresis‐driven permeation studies. A reversed‐phase C₁₈ column (250 mm x 4.6 mm, 3μm, 110Å) was used for the chromatographic separation. The mobile phase contained acetonitrile: 0.1M sodium phosphate buffer, pH 7.0 (1:1, v/v), plus 0.05% (v/v) diethylamine. The isocratic flow rate was set at 1 mL/min and the detection wavelength was 203 nm. PCL and LCL eluted in 8.9 min and 13 min, respectively, and the system suitability parameters varied within an acceptable range. The method was selective, sensitive, precise, accurate and robust, producing a linear plot at the concentration range of 0.25 to 10 µg/mL. The application of this method was demonstrated by a significant enhancement of the permeation of PCL and LCL with the application of iontophoresis (1 mA/cm² per 1 h) through isolated porcine esophageal epithelium. The amount of the drug retained in the epithelium also increased with the application of an electrical current. Copyright © 2015 John Wiley & Sons, Ltd.     

Simultaneous determination of paeoniflorin from total glucosides of paeony in Sprague–Dawley rats and spontaneously hypertensive rats by high‐performance liquid chromatography–tandem mass spectrometry: in vivo and in vitro studies

Paeoniflorin is a well‐known monoterpene glucoside in the herbal drug that exhibits a number of biological activities. The pharmacokinetic characteristics of paeoniflorin from total glucosides of paeony in spontaneously hypertensive rats (SHR) are still unclear. It is essential to investigate the in vivo and in vitro pharmacokinetic differences of paeoniflorin from total glucosides of paeony in Sprague–Dawley (SD) and SHR. The in vivo pharmacokinetic data were analyzed using DAS 2.0 software and the in vitro metabolic characteristics were measured using rat hepatic microsomes. The concentration of paeoniflorin in biological samples was determined using high‐performance liquid chromatography–electrospray ionization tandem mass spectrometry method, which showed good precision and stability. The plasma concentration–time profiles of paeoniflorin following oral administration of total glucosides of paeony showed a single peak and there were significant differences in the mean values of AUC_(0–t), AUC_(0–∞), CL_z/F and T_max between SD and SHR (p < 0.05). The metabolic rate of paeoniflorin from total glucosides of paeony was slower in SHR than in SD rats (p < 0.05). The results might be useful in further applications of paeoniflorin and total glucosides of paeony. Copyright © 2016 John Wiley & Sons, Ltd.     

Copper(I)‐Catalyzed Asymmetric Dearomatization of Indole Acetamides with 3‐Indolylphenyliodonium Salts

The rapid and direct asymmetric synthesis of 3‐(3a‐indolyl)hexahydropyrroloindoline motifs is an extremely important part of the total synthesis of several alkaloid structures. Herein, an intermolecular, asymmetric cascade dearomatization reaction of indole acetamides with 3‐indolylphenyliodonium salts has been developed. This protocol provides a straightforward access to 3‐(3a‐indolyl)hexahydropyrroloindolines bearing an all‐carbon quaternary stereocenter at the C3 position of the indoline ring with high enantioselectivities. The utility of the protocol has been demonstrated by the formal asymmetric synthesis of folicanthine.     

Dithienoindophenines: p‐Type Semiconductors Designed by Quinoid Stabilization for Solar‐Cell Applications

Compared with the dominant aromatic conjugated materials, photovoltaic applications of their quinoidal counterparts featuring rigid and planar molecular structures have long been unexplored despite their narrow optical bandgaps, large absorption coefficients, and excellent charge‐transport properties. The design and synthesis of dithienoindophenine derivatives (DTIPs) by stabilizing the quinoidal resonance of the parent indophenine framework is reported here. Compared with the ambipolar indophenine derivatives, DTIPs with the fixed molecular configuration are found to be p‐type semiconductors exhibiting excellent unipolar hole mobilities up to 0.22 cm² V^?1 s^?1, which is one order of magnitude higher than that of the parent IP‐O and is even comparable to that of QQT(CN)4‐based single‐crystal field‐effect transistors (FET). DTIPs exhibit better photovoltaic performance than their aromatic bithieno[3,4‐b]thiophene (BTT) counterparts with an optimal power‐conversion efficiency (PCE) of 4.07 %.