基于纳米镍催化的松香加氢研究--树酯酸组成的研究

松香的主要成份是枞酸型树脂酸,其因共轭双键的存在而易被氧化,大大降低了其附加值。经氢化后的松香具有抗氧性好、脆性小、热稳定性高、颜色浅等特点,因而广泛应用于胶粘剂、合成橡胶、涂料、油黑、造纸、电子、食品等工业部门[1]。采用催化加氢的方法可使枞酸型树脂酸中的共轭双键消除[2]。以枞酸为代表的反应式为:松香催化加氢主要有熔融法[3]和溶剂法[4],所用催化剂主要是Pd和N i。熔融法制氢化松香,当反应温度低于200℃时,枞酸加氢速度较慢,反应不完全。温度升高,氢化松香中枞酸含量显著地减少,但温度高于250℃时,树脂酸脱羧严重,甚至…     

分散剂PVA对水热反应制备LiFePO4性能的影响

应用改进的水热反应法制得粒径小且分布均匀的L iFePO4颗粒,煅烧时加葡萄糖形成包覆碳.XRD、SEM和充放电测试表明,该材料粒径约200 nm,颗粒的尺寸分布比较均匀,具有3.45 V的放电平台,放电容量最高达到140 mAh/g,循环到第40周容量仅衰减2.1%.详细讨论了如何有效调控L iFePO4的粒子尺寸以及包覆碳对其电化学性能的影响.     

浅谈数学中的合情推理

合情推理是数学发现的重要方法,本文介绍了合情推理的概念、作用、途径.所论及的内容对数学教学有参考价值.     

具有聚集诱导发光行为的环状多烯类分子

研究了ΔH-pyrans,fulvenes,siloles等环状多烯结构的小分子荧光染料在溶液,固态及薄层层析板上的荧光发射行为.与大多数传统的荧光染料小分子不同,这些多烯类荧光染料分子在稀溶液中基本没有荧光,而在聚集态下呈现非常明亮的荧光发射,同时伴随着荧光量子效率的大幅提高(聚集诱导发光).它们在薄层层析板上也具有很强的荧光发射.但当薄层层析板暴露于有机溶剂气氛下,荧光消失,离开有机溶剂气氛,荧光恢复,这一可逆过程并可多次重复.在固体状态,它们的荧光发射与聚集态结构密切相关.通过从无定型态到结晶态以及从一种结晶态到另一种结晶态的变化,可以有效的调节它们的固体荧光发射.     

Simultaneous Determination of Seven Lipophilic and Hydrophilic Components in Salvia miltiorrhiza Bunge by LC-MS/MS Method and Its Application to a Transport Study in a Blood-Brain-Barrier Cell Model

Salvia miltiorrhiza Bunge (SM) has been extensively used in Alzheimer’s disease treatment, the permeability through the blood-brain barrier (BBB) determining its efficacy. However, the transport mechanism of SM components across the BBB remains to be clarified. A simple, precise, and sensitive method using LC-MS/MS was developed for simultaneous quantification of tanshinone I (TS I), dihydrotanshinone I (DTS I), tanshinone IIA (TS IIA), cryptotanshinone (CTS), protocatechuic aldehyde (PAL), protocatechuic acid (PCTA), and caffeic acid (CFA) in transport samples. The analytes were separated on a C18 column by gradient elution. Multiple reaction monitoring mode via electrospray ionization source was used to quantify the analytes in positive mode for TS I, DTS I, TS IIA, CTS, and negative mode for PAL, PCTA, and CFA. The linearity ranges were 0.1–8 ng/mL for TS I and DTS I, 0.2–8 ng/mL for TS IIA, 1–80 ng/mL for CTS, 20–800 ng/mL for PAL and CFA, and 10–4000 ng/mL for PCTA. The developed method was accurate and precise for the compounds. The relative matrix effect was less than 15%, and the analytes were stable for analysis. The established method was successfully applied for transport experiments on a BBB cell model to evaluate the apparent permeability of the seven components.     

考虑时滞效应与均值-方差效用的非零和投资与再保险博弈

在考虑时滞效应的影响下研究了非零和随机微分投资与再保险博弈问题.以最大化终端绝对财富和相对财富的均值-方差效用为目标,构建了两个相互竞争的保险公司之间的非零和投资与再保险博弈模型,分别在经典风险模型和近似扩散风险模型下探讨了博弈的Nash均衡策略.借助随机控制理论以及相应的广义Hamilton-Jacobi-Bellm...     

大尺寸电阻加热式碳化硅晶体生长热场设计与优化

大尺寸低缺陷碳化硅(SiC)单晶体是功率器件和射频(RF)器件的重要基础材料,物理气相传输(physical vapor transport, PVT)法是目前生长大尺寸SiC单晶体的主要方法。获得大尺寸高品质晶体的核心是通过调节组分、温度、压力实现气相组分在晶体生长界面均匀定向结晶,同时尽可能减小晶体的热应力。本文对电阻加热式8英寸(1英寸=2.54 cm)碳化硅大尺寸晶体生长系统展开热场设计研究。首先建立描述碳化硅原料受热分解热质输运及其多孔结构演变、系统热输运的物理和数学模型,进而使用数值模拟方法研究加热器位置、加热器功率和辐射孔径对温度分布的影响及其规律,并优化热场结构。数值模拟结果显示,通过优化散热孔形状、保温棉的结构等设计参数,电阻加热式大尺寸晶体生长系统在晶锭厚度变化、多孔介质原料消耗的情况下均能达到较低的晶体横向温度梯度和较高的纵向温度梯度。     

添加CaSO4·2H2O为晶种制备磷石膏半水硫酸钙晶须

以固体废弃物磷石膏为原料,在传统常压醇水热法的基础上添加CaSO₄·2H₂O为晶种制备半水硫酸钙晶须。采用单因素试验法探究了晶种含量、丙三醇含量和磷石膏质量分数对晶须结构和形貌的影响,确定晶须的最佳制备工艺条件。采用SEM和XRD对样品进行表征分析,实验结果表明:添加CaSO₄·2H₂O晶种制备晶须的长径比(49.29)比只添加丙三醇的样品的长径比(30.99)提高了近60%;当丙三醇与水的体积比(V)为1、晶种含量为1%、磷石膏质量分数为5%时制备的晶须的平均直径为0.65 μm,长径比达到了62.15,晶须的尺寸均匀。这说明添加1%CaSO₄·2H₂O晶种、V为1的丙三醇和质量分数为5%的磷石膏在常压下能制备出高长径比和尺寸均匀的半水硫酸钙晶须。     

On fractional difference logistic maps: Dynamic analysis and synchronous control

This paper investigates a logistic map derived from a difference equation in the framework of discrete fractional calculus. Through the Poincaré plots and Julia sets, the map’s chaotic and fractal characteristics are studied comparing with those of a quadratic map to be proposed. The memory effect of fractional difference maps is reflected in these dynamics, and some reasonable explanations are given by combining with quantitative analysis. A coupled controller is designed to realize synchronization between fractional difference logistic map and fractional difference quadratic map.