Strong Pauli paramagnetic effect in the upper critical field of KCa2Fe4As4F2

Recently, 12442 system of Fe-based superconductors has attracted considerable attention owing to its unique double-Fe As-layer structure. A steep increase in the in-plane upper critical field with cooling has been observed near the superconducting transition temperature, Tc, in KCa2Fe4As4F2 single crystals. Herein, we report a high-field investigation on upper critical field of this material over a wide temperature range, and both out-of-plane(H∥c, Hc2c) and in-plane(H∥ab, Hc2ab ) directions have been measured.A sublinear temperature-dependent behavior is observed for the out-of-plane Hc2c , whereas strong convex curvature with cooling is observed for the in-plane Hc2ab . Such behaviors could not be described by the conventional Werthamer-Helfand-Hohenberg(WHH) model. The data analysis based on the WHH model by considering the spin aspects reveals a large Maki parameter α=9,indicating that the in-plane upper critical field is affected by a very strong Pauli paramagnetic effect.     

Transferring entangled states of photonic cat-state qubits in circuit QED

We propose a method for transferring quantum entangled states of two photonic cat-state qubits(cqubits)from two microwave cavities to the other two microwave cavities.This proposal is realized by using four microwave cavities coupled to a superconducting flux qutrit.Because of using four cavities with different frequencies,the inter-cavity crosstalk is significantly reduced.Since only one coupler qutrit is used,the circuit resource is minimized.The entanglement transfer is completed with a singlestep operation only,thus this proposal is quite simple.The third energy level of the coupler qutrit is not populated during the state transfer,therefore decoherence from the higher energy level is greatly suppressed.Our numerical simulations show that high-fidelity transfer of two-cqubit entangled states from two transmission line resonators to the other two transmission line resonators is feasible with current circuit QED technology.This proposal is universal and can be applied to accomplish the same task in a wide range of physical systems,such as four microwave or optical cavities,which are coupled to a natural or artificial three-level atom.     

双稳态结构中的1/2次谐波共振及其对隔振特性的影响

以典型的双稳态系统——屈曲梁结构为例,基于等效模型,结合解析、数值和实验手段,研究了双稳态结构中的1/2次谐波共振特性、演化过程、参数调节规律及其对隔振特性的影响.研究发现,当非线性刚度系数或激励幅值增加到一定程度时,系统会在一定带宽下产生显著的1/2次谐波共振;随着激励幅值增加,阻尼系统的1/2次谐波遵循“产生-增强-衰退-消失”的过程,该过程对峰值频率和峰值传递率有重要影响;适当提高非线性强度能有效改善双稳态结构隔振特性.针对双稳态屈曲梁结构开展的实验验证了1/2次谐波特性和隔振特性变化规律.     

离子浮选石墨炉原子吸收光谱法测定水中痕量Cr（Ⅵ）／Cr（Ⅲ）

本文以二苯卡巴肼（ＤＰＣＩ）和十二烷基硫酸钠（ＳＬＳ）为浮选剂研究了分离浓缩（Ｃｒ（Ⅵ）的最佳条件，建立了水中痕量络的形态分析方法。该方法简单、快速、检测限０．０３μｇＬ＾－１，变异系九小于４％，２００ｍＬ水样中含ＮＯ３５０，Ｎａ＾＋，Ｍｇ＾２＋４０，Ｃｌ２８，Ｄ，Ｃａ＾２＋，ＳＯ４１０，ＣＯ３９，Ａｌ＾２＋，Ｃｏ＾２＋，Ｎｉ６２＋５，Ｍｎ＾２，Ｐｂ＾２＋２．５，Ｆｅ＾３＋０．２ｍｇ不影响测定。方     

微分电位溶出法测定人发中铜铅镉锌的研究

本文报道了０．００２５ｍｏｌ·Ｌ￣（－１）ＨＣｌ－０．２ｍｏｌ·Ｌ￣（－１）ＮＨ＿（４）Ｃｌ底液中连续测定人发中铜、铅、镉、锌的微分电位溶出法。四元素峰电位分别为－０．２０Ｖ，－０．４６Ｖ，－０．６７Ｖ，一１．０２Ｖ（ＳＣＥ），峰形好，灵敏度高，干扰少，测定发样相对标准偏差≤４．３％，回收率为９７．６％～１０４．６％。并对ＨＮＯ＿３－ＨＣｌＯ＿４和ＨＮＯ＿（３）Ｈ＿（２）Ｏ＿２消化发样进行了比较。     

环己酮肟在改性氧化锆催化剂上的Beckmann重排反应Ⅱ．影响重排反应的若干因素

环己酮肟在改性氧化锆催化剂上的Ｂｅｃｋｍａｎｎ重排反应Ⅱ．影响重排反应的若干因素程时标徐柏庆唐守平蒋山蔡天锡王祥生（大连理工大学化工学院化学系，大连１１６０１２）关键词氧化硼，氧化锆，负载型催化剂，环己酮肟，Ｂｅｃｋｍａｎｎ重排反应，己内酰胺前文［１...     

环境水中化学需氧量的FI分光光度法自动在线检测

本文将流动注射分光光度法用于环境废水中化学需氧量（ＣＯＤ）的自动在线检测，方法线性范围在０－１００ｍｇ／Ｌ之间，相对标准偏差＜２％以葡萄糖和苯二甲酸氢钾混合液制备标准溶液，对标准参考水样ＣＯＤ含量（Ｃｒ值）的测定结果表明两者有良好的相关性（Ｒ＝０．９８８０）对环境水样中ＣＯＤ含量的动态变化连续１０ｈ模拟试验，自制的在线过滤装置稳定，未发生堵塞现象；该系统可以较好地跟踪水样中ＣＯＤ浓度的实际变化     

2-〔2′-(6-溴-苯并噻唑)-偶氮〕-1,8-二羟基萘-3,6-二磺酸的合成及其与钛的显色反应

本文合成了一种新的革并座隆类显色试剂—2－［2′－（6－溴－苯并噻唑）－偶氮］－1，8－二羟基萘－3，6－二磺酸（简称Br－BTCA），并研究了其与钛的显色反应。在CTMAB存在下，钛与试剂形成稳定的络合物，其ε616=1．15×105L·mol－1·cm-1，组成为Ti（Ⅳ）：R：=1：2：钛浓度在0～0．5mg／L范围内符合比尔定律，该方法灵敏度高，选择性好，并用于铝合金及硅铁试样中微量钛的测定     

2-芳胺基-5-[5′-氨基-1′-(4″-氯苯基)-1′,2′,3′-三唑-4′-基]-1,3,4-噻二唑的合成~≠

1-[5’-氨基-1’-(4”-氯苯基)-1,2,3-三唑-4’-甲酰基]-4-芳基-3-氨基硫脲在浓硫酸催化下环化得到2-芳胺基-5-[5’-氨基-1’-(4”-氯苯基)-1’,2’,3’,-三唑-4’-基]-1,3,4-噻二唑2a～i,依次法合成了九个标题化合物,收率为30～74％。化合物2i的结构用X-光衍射单晶分析确证。     

孔壁含有沸石次级结构单元的MCM-48的合成及催化研究

以双表面活性剂（双极性头表面活性剂和三乙醇胺）为模板，以含有沸石次级结构单元的溶胶为前驱体，在碱性条件下合成了新型介孔分子筛MCM 48。研究了沸石前驱体和三乙醇胺对产物MCM 48形成的影响，XRD和TEM表征结果表明，样品具有较高的结晶度和规则的孔径；FTIR和N2吸附表征结果表明，产物MCM 48的孔壁中含有沸石的次级结构单元，从而使得样品具有更大的比表面积。产物的重芳烃轻质化反应催化活性表明，实验样品对重芳烃的转化率比常规的MCM 48高，转化率约高出11%，进一步证明了实验样品的孔壁中含有沸石的结构单元。