Electron-mediated ferromagnetism in Fe-doped InP: Theory and experiment

We report on the electron-mediated ferromagnetism in Fe-doped InP from both first-principles calculations and experiments. Theoretically, based on the spin-polarized density functional theory within the Heyd-Scuseria-Ernzerhof (HSE03) approach, we systematically investigate the magnetic properties of Fe-doped InP and predict the existence of electron-mediated ferromagnetism. Experimentally, by diffusing Fe into the n-type InP wafer with thermal annealing at 800 C, we observe room-temperature ferromagnetism in InP:Fe, which is in agreement with the theoretical prediction.     

基于粒子滤波的一种改进的资料同化方法

针对在粒子数较少时传统的集合卡尔曼滤波和粒子滤波方法不能有效表征后验概率密度函数(PDF)的问题, 提出了一种改进的粒子滤波方法. 主要思想是在预测步之后引入更新步, 并且将观测时刻与非观测时刻的同化分析进行区别处理. 对典型的低维和高维混沌系统的仿真结果表明:改进粒子滤波方法是一种非常有效的估计非线性非高斯随机系统状态的方法.     

Effect of Cu doping on the magnetic and electrical properties of n=2 Ruddlesden-Popper manganates

A series of polycrystalline Cu-doped n=2 Ruddlesden-Popper manganates La1.2Sr1.8CuzMn（2-x）O7 （x=0, 0.04, 0.13） were synthesized by the solid state reaction method. The effect of Cu doping on the magnetic and transport properties has been studied. It is found that Cu substitution for Mn greatly affects the magnetic and electrical properties of the parent phase La1.2Sr1.8Mn2O7. With the increase of Cu content, the system undergoes a transition from longrange ferromagnetic order to the spin glass state and further to an antiferromagnetic order. A little of Cu dopant can lead to the samples showing semiconductor or insulator behaviour in the whole observed temperature range while the parent phase has a metal-insulator transition. These samples show colossal magnetoresistance at low temperatures and the value of it decreases with increasing Cu content.     

LED在自感现象演示实验中的应用

利用发光二极管对自感现象演示实验进行了改进,明显地提高了实验效果,加深了对自感现象的认识。     

Photocatalytic degradation of methyl orange by nano-TiO_2 thin films prepared by RF magnetron sputtering

Nano-TiO2 thin films are deposited by radio frequency （RF） magnetron sputtering using TiO2 ceramic target and characterized by X-ray diffractometer, atomic force microscope, and ultraviolet-visible spectrophotometer. The photocatalytic activity is evaluated by light-induced degradation of methyl orange solutions （5, 10, and 20 ppm） using a high pressure mercury lamp as the light source. The film is amorphous, and its energy gap is 3.02 eV. The photocatalytic degradation of methyl orange solution is the first-order reaction and the apparent reaction rate constants are 0.00369, 0.0024, and 0.00151 for the methyl orange solution concentrations of 5, 10, and 20 ppm, respectively.     

Two-dimensional model of elastically coupled molecular motors

A flashing ratchet model of a two-headed molecular motor in a two-dimensional potential is proposed to simulate the hand-over-hand motion of kinesins.Extensive Langevin simulations of the model are performed.We discuss the dependences of motion and efficiency on the model parameters,including the external force and the temperature.A good qualitative agreement with the expected behavior is observed.     

Experimental observation of classical subwavelength interference with a pseudothermal light source

We report the experimental observation of classical subwavelength double slit interference with a pseudothermal light source. The experimental results are in good agreement with the theoretical simulation using the second order correlation function for the thermal light.     

A new subdivision method for grating-based displacement sensor using imaging array

A new subdivision method for grating-based displacement sensor was proposed in the present study, which takes advantages of imaging array's high resolution and pixels’ good uniformity in the space. In this method, the magnified grating image is received by imaging array and grating pitch is directly subdivided by pixels, which is quite different from that moiré fringe is subdivided by complex subsequent circuits in moiré-type displacement sensor. The displacement is statistically calculated by using the whole grating image, which greatly eliminates the errors arising from illumination, electrical signals’ fluctuation, grating defect, and so on. Therefore, the subdivision method is easy to obtain signal with high signal-to-noise ratio, insensitive to some external factors, and able to attain high measurement precision with low cost. In this paper, the principle of subdivision method was illuminated, the systemic resolution was theoretically discussed, the measurement precision was experimentally checked, and the uncertainty of measurement was analyzed. The subdivision system consisted of the grating with 20-μm pitch and the CMOS image sensor with the pixels of 1280×1024 had the resolution of 0.04 μm, and the maximum displacement error was less than 0.4 μm, which has been tested in the Abbe comparator platform.     

多核环境下潮汐分析辅助软件并行绘制技术研究

为方便科研人员使用Baytap-G潮汐分析软件,基于C#.NET程序设计语言设计了一套潮汐分析辅助软件,实现了Baytap-G软件的封装,完成了输入数据格式的自动转换、输出数据的自动提取,以及水位、振幅、相位数据的可视化展示;在介绍C#.NET语言中任务(TASK)并行编程模型的基础上,详细讨论了绘制振幅、相位图任务分解、并行化程序设计考虑及其实现;实验结果表明,合理设计并行程序可以充分利用多核计算机的计算资源,提升程序运行效率,但是过多的任务数、不均匀的工作负载通常会影响并行程序的效率。     

研究堆慢正电子源构建中的关键机理问题

研究堆慢正电子源是获得高强度慢正电子束流的有效方式,国际上己建成多座装置并获得广泛应用.与常规同位素慢正电子源相比,研究堆慢正电子源的物理过程复杂,影响末端束流强度的因素众多,对其进行深入研究与合理建模是未来在中国绵阳研究堆(CMRR)上构建慢正电子源的基础.本文厘清了研究堆慢正电子产生的关键过程与物理机理,建立了预测末端正电子束流强度的理论模型,找到了影响其末端强度的主要物理量:快正电子体产生率、慢化体有效表面积、慢化体扩散距离、慢正电子从表面被提取到靶环末端的效率、及束流系统提取效率.用多种实验结果对模型进行校验,包括多个同位素慢正电子源的效率测量值,以及PULSTAR研究堆慢正电子源测量结果,充分验证了模型正确性.根据模型对各物理量的影响因素进行了分析,找到了需着重关注的影响因素,对未来源/靶结构的设计给出建议.