Multivariate approach for the enantioselective analysis in MEKC‐MS: II. Optimization of 1,1′‐binaphthyl‐2,2′‐diamine in positive ion mode

Enantiomeric separation and detection of 1,1′‐binaphthyl‐2,2′‐diamine (BNA) has been successfully optimized by MEKC‐ESI‐MS using a polymeric surfactant polysodium N‐undecenoxycarbonyl‐L‐leucinate (poly‐L‐SUCL) as a pseudostationary phase. In the first step, MEKC conditions were optimized by a five‐factor three‐level central composite design (CCD) of experiment. All five MEKC factors (buffer pH, percentage of ACN in the running buffer, concentration of surfactant, concentration of ammonium acetate (NH₄OAc), and voltage) were found significant to the responses (measured as the chiral resolution and analysis time). The interactions between MEKC factors were further evaluated using a quadratic model equation which allowed the generation of 3‐D response surface image to reach the optimum conditions. To obtain the best S/N, sheath liquid composition and spray chamber parameters were successfully optimized using the same strategy. Baseline enantiomeric resolution in less than 20 min and optimum MS signal of BNA enantiomers (S/N = 45 at 0.4 mg/mL) were ultimately achieved at the optimized conditions. The adequacy of the model was validated by experimental runs at the optimal predicted conditions. The predicted results were found to be in good agreement with the experimental data.     

Chiral separations in microemulsion electrokinetic chromatography. Use of micelle polymers and microemulsion polymers

In this study, microemulsions of the chiral surfactant polysodium N-undecenoyl-D-valinate (poly-D-SUV) was utilized for enantiomeric separation by investigating two approaches using polymeric chiral surfactant in microemulsion electrokinetic chromatography (MEEKC). In the first approach, poly-D-SUV was used as an emulsifier surfactant along with 1-butanol and n-heptane. Enantioseparation of anionic or partially anionic binaphthyl derivatives, anionic barbiturates, and cationic paveroline derivatives were achieved by varying the mass fraction of 1-butanol, n-heptane and poly-D-SUV. For anionic or partially anionic analytes, relatively lower mass fractions of n-heptane, and poly-D-SUV were found to give optimum chiral separations as compared to that for cationic solutes. In the second approach, the chiral microemulsion polymer was prepared by polymerizing mixtures of 3.50% (w/w) of sodium N-undecenoyl-D-valinate (D-SUV) and 0.82% (w/w) of n-heptane (core phase) at varying concentration of 1-butanol. After polymerization, the n-heptane and 1-butanol were removed to yield solvent free microemulsion polymers (MPs) which were then utilized for the separation of anionic binaphthyl derivatives and anionic barbiturates. When MPs of D-SUV were utilized for chiral separation, 1.00% (w/w) 1-butanol and 3.50% (w/w) 1-butanol was optimum for enantioseparation of (+/-)-BNP and (+/-)-BOH, respectively. On the other hand, for anionic (+/-)-barbiturates very low concentration of butanol (0.25%, w/w) provided optimum resolution. Compared with micellar electrokinetic chromatography (MEKC), the use of micelle polymers or microemulsion polymers in MEEKC showed dramatic enhancement for resolution of (+/-)-BNP, while this enhancement was less dramatic for other binaphthyls [(+/-)-BOH, (+/-)-BNA] as well as for (+/-)-barbiturates and (+/-)-paveroline derivatives. However, higher separation efficiency of the enantiomers was always observed with MEEKC than in MEKC.     

Synthesis of poly(2‐hydroxyethyl methacrylate)‐based molecularly imprinted polymer nanoparticles containing timolol maleate: morphological,thermal, and drug release along with cell biocompatibility studies

This work was aimed to synthesize and characterize poly(2‐hydroxyethyl methacrylate) [poly (HEMA)]‐based molecularly imprinted polymer nanoparticles (MIP NPs) containing timolol maleate (TM) via precipitation polymerization. The molecular structures of the MIP and non‐imprinted polymer (NIP) NPs were compared by means of Fourier transform infrared spectroscopy. The morphological observations by using scanning electron microscopy and transmission electron microscopy confirmed the formation of MIP NPs as small as 128 nm in average diameter with appropriate synthesis conditions. Thermal behaviors of the samples were also studied by the use of thermogravimetric analysis and differential scanning calorimetry. By considering a series of key factors such as monomer : template ratio, cross‐linker type, pH, and temperature, the sample with promising characteristics was found to be that of HEMA : TM ratio of 10:1, 40 mmol of ethylene glycol dimethacrylate as cross‐linker, and polymerization temperature of 60°C in acetonitrile as porogenic solvent. Furthermore, the ultraviolet‐visible (UV‐vis) spectrophotometry results proved a controlled release of TM from the MIP NP samples compared with NIP ones at extended periods. Moreover, the cytotoxicity of the MIP and NIP NPs samples was evaluated on mesenchymal stem cells, and the obtained observations showed that they had no adverse side effect on the living cells; especially the surface of the MIP NPs sample depicted highly cell's biocompatibility. Finally, the outcomes from designed different experiments conducted us that the HEMA‐based MIP NPs have great potential as an ocular nanocarrier for TM delivery. Copyright © 2016 John Wiley & Sons, Ltd.     

相对论重离子碰撞中Λ粒子产生和Λ/p比率

利用强子输运–弦碎裂模型研究了200A GeV重离子碰撞中Λ多重产生和Λ/p比率.研究了它们随反应系统大小和碰撞中心度的变化.研究表明Λ和p多重数都随反应系统增大和随碰撞中心度提高而增大,但它们的比率基本保持不变.Λ的湮没截面大小变化对Λ的多重数产生有一定影响,但对Λ/p比率影响不大.结果很好地再现了pp反应中Λ/p比率.并获得这一比率在AA反应中是pp反应中的3—5倍.     

Capillary electrophoresis-mass spectrometry: recent advances to the analysis of small achiral and chiral solutes

We describe here the state-of-the-art development of on-line capillary electrophoresis-mass spectrometry (CE-MS) over the last two years. Technological developments included are novel designs of new interfaces and ionization sources, new capillary coatings, buffers, and micelles as well as application of various modes of CE-MS published in the recent literature. The areas of CE-MS application in analysis of small achiral and chiral solutes are covered in sections that highlight the recent advances and possibilities of each mode of CE-MS. Application areas reviewed in this paper include achiral and chiral pharmaceuticals, agrochemicals, carbohydrates, and small peptides. The separation of enantiomers using micellar electrokinetic chromatography (MEKC)-MS with molecular micelles and capillary electrochromatography (CEC)-MS using pack tapered columns appears to provide good tolerance to electrospray stability for routine on-line CE-MS. These two modes seem to be very suitable for sensitive detection of chiral pharmaceuticals in biological samples, but their use will probably increase in the near future. Overall, it seems that one mode of CE-MS, in particular capillary zone electrophoresis (CZE)-MS, is now recognized as established technique for analysis of small charged solutes, but other modes, such as MEKC-MS and CEC-MS, are still within a period of development in terms of both MS-compatible pseudostationary phases and columns as well as applications.     

Brush-type chiral stationary phase for enantioseparation of acidic compounds. Optimization of chiral capillary electrochromatographic parameters

The capillary electrochromatographic separations of three acidic enantiomers (carprofen, coumachlor and warfarin) were studied on a capillary column packed with 5 microm (3R,4S)-Whelk-O 1 chiral stationary phase. The influence of several experimental parameters (mobile phase pH, type of background electrolyte, acetonitrile ratio, temperature, applied voltage and ionic strength) on electroosmotic flow velocity, retention factor, selectivity factor, efficiency, resolution and effectiveness of chiral separation was evaluated. It was notable that the optimum resolution of the acidic enantiomers was achieved at pH 3.0 phosphate buffer, suggesting that capillary electrochromatography in the ion-suppressed mode can be applied for chiral separations of a range of acidic compounds.     

Chiral separation of anionic and neutral compounds using a hepta-substituted cationic beta-cyclodextrin as a chiral selector in capillary electrophoresis

Enantiomeric separations of six anionic and two neutral racemates were achieved using a fully substituted heptakis(6-hydroxyethylamino-6-deoxy)-beta-cyclodextrin (beta-CD-EA) as a chiral selector. As beta-CD-EA provides a dynamic coating on the capillary wall, reverse-polarity capillary electrophoresis (CE) configuration is applied for separations of anionic and neutral chiral compounds. Chiral separations of various classes of anionic and neutral enantiomers were found to be highly dependent on pH because the degree of protonation of beta-CD-EA can alter the shape of the CD cavity by charge repulsion, altering complexation, aiding selectivity, and leading to better enantiomeric separation. In general, the chiral resolution of anionic enantiomers was enhanced at higher pH. This suggests that carboxylate or phosphate groups on the analyte may interact with the protonated amine groups of cationic CD. The successful enantioseparation was achieved in a pH range of 6.6-7.8 for all six anionic analytes, in the presence of 10 mM beta-CD-EA.     

TDDFT Studies of Electronic Structure and First Hyperpolarizability of Tetra-nuclear Cubane-like Transition Metal Clusters

A series of tri-nuclear transition metal clusters with incomplete cubane-like configurations have been studied by TDDFT method. The calculations show that they have enormously large second-order polarizabilities () and are potential nonlinear optical materials for infrared double frequency conversion1. In this paper some tetra-nuclear transition metal clusters with cubane-like configurations, MCu3X4 (PPh3)3 (M=W, Mo; X= S, O, Cl, Se, Br), were studied by TDDFT method for a reference…     

Electrokinetic chromatography of twelve monomethylbenz[a]anthracene isomers using a polymerized anionic surfactant

A method for the separation of twelve monomethyl-substituted benz[a]anthracene isomers using poly-(sodium undecylenic sulfate) (poly-SUS) surfactant by means of electrokinetic capillary chromatography (EKC) is described. Several parameters such as concentration of acetonitrile (ACN), pH, as well as applied voltage were studied to optimize the EKC separation. ACN at a concentration of 35% v/v, 12.5 mM phosphate-borate buffer, 30 kV with 0.5% w/v poly-SUS at a pH of 9.5 provided a resolution of a mixture of nine out of twelve methylbenz[a]anthracene (MBA) isomers in 50 min. The results of this study suggest that molecular length of MBA rather than length-to-breath ratio plays an important role in the elution order of some isomers.     

双圈图的零度与其匹配数之间的关系

Let G be a graph with n(G) vertices and m(G) be its matching number.The nullity of G,denoted by η(G),is the multiplicity of the eigenvalue zero of adjacency matrix of G.It is well known that if G is a tree,then η(G) = n(G)-2m(G).Guo et al.[Jiming GUO,Weigen YAN,Yeongnan YEH.On the nullity and the matching number of unicyclic graphs.Linear Alg.Appl.,2009,431:1293 1301]proved that if G is a unicyclic graph,then η(G)equals n(G)-2m(G)-1,n(G)-2m(G),or n(G)-2m(G) +2.In this paper,we prove that if G is a bicyclic graph,then η(G) equals n(G)-2m(G),n(G)-2m(G)±1,n(G)-2m(G)±2or n(G)-2m(G) + 4.We also give a characterization of these six types of bicyclic graphs corresponding to each nullity.