Quantum phase transitions of hard-core bosons in background potentials

We study the zero temperature phase diagram of hard-core bosons in two dimensions subjected to three types of background potentials: staggered, uniform, and random. In all three cases there is a quantum phase transition from a superfluid (at small potential) to a normal phase (at large potential), but with different universality classes. As expected, the staggered case belongs to the XY universality, while the uniform potential induces a mean field transition. The disorder driven transition is clearly different from both; in particular, we find z approximately 1.4, nu approximately 1, and beta approximately 0.6.     

Photoinduced charge transfer mechanism in PPV [poly(p-phenylinevinylene)] polymer: role of iodide species

The photophysical and photochemical behavior of poly(p-phenylinevinylene (PPV) polymers in different solvents (toluene and Triton X-100) and in thin form [PPV/optical transparent electrode (OTE)] has been investigated by emission and transient absorption spectroscopies. The absorption and emission studies strongly indicate the presence of dynamic quenching for PPV polymers in different solvents (toluene and Triton X-100) in the presence of LiI/I₂. The fluorescence quenching of the PPV polymer by iodide obeys the linear Stern–Volmer equation for PPV/toluene/LiI system. The positive deviation from Stern–Volmer observed in PPV/Triton X-100/I₂ system may be accounted for by the “quenching sphere of action model”. Emission studies indicated an increased conjugation length for PPV polymers on going from solution to the solid state. The emission of PPV was readily quenched by hole scavengers such as I⁻ (LiI, I₂). The photoinduced charge transfer to these hole scavengers was studied by laser flash photolysis. The transient absorption measurements confirm the formation of I⁻ and subsequent formation of which has been reported for the first time for PPV/I₂ system.     

Synthesis of conformationally diverse tetrathiacalix[4]arene(amido)crowns and tetrathiacalix[4]arene amides with pendant amine functions

A series of conformationally diverse novel tetrathiacalix[4]arene(amido)crowns and amides from tetrakis((ethoxycarbonyl)methoxy)p-tert-butyl tetrathiacalix[4]arene and its debutylated analog have been prepared by their reaction with diamines [H₂N(CH₂)_nNH₂; n=2,3,4, and 6] and polyamines. It has been determined that the length of the alkyl spacer in diamines is pivotal for the formation of either the tetrathiacalix[4]arene bis(amido)crowns or tetrathiacalix[4]arene amides with pendant amine functions. The synthesized compounds represent potential building blocks for achieving sophisticated molecular assemblies for molecular organization and recognition. Single crystal X-ray analysis of tetrathiacalix[4]arene bis(amido)crown 6a revealed that it has a 1,3-alternate conformation, which forms supramolecular complexes with chloroform.     

Effect of ratios of Cd:Se in CdSe nanoparticles on optical edge shifts and photoluminescence properties

This paper addresses the issue related to morphology of CdSe nanoparticles capped with organic molecules. Semiconducting CdSe nanoparticles of 5–16 nm are synthesized using CdO precursor, capped with trioctyl phosphine (TOP)/trioctyl phosphine oxide (TOPO) using different starting precursor ratios of Cd:Se. At an optimum ratio of Cd/Se-2:1, highly luminescent and small sized (5 nm) nanoparticles are obtained. At other Cd/Se precursor ratios (0.5:1, 1:1, 3:1) larger particles are formed with varying photoluminescence (PL) intensity and optical absorption (UV–VIS). X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) are used to determine the crystallinity and stoichiometry of the system, respectively. It is shown that the blue shifts of the optical absorption edge concurrent with the CdSe nanocrystal size reduction, for sizes measured by XRD with respect to the bulk semiconductor, agree perfectly with the strong quantum confinement model. The optical edge shifts are significantly higher for CdSe nanocrystallite as measured by transmission electron microscopy (TEM) than the theoretical prediction based on the strong quantum confinement model. This is understood on the basis of agglomeration effects as observed by TEM for CdSe nanocrystallites. The nano-sized CdSe growth island thus formed comprises of several TOP/TOPO passivated nanocrystals.     

Minimisation of palladium content in Suzuki cross-coupling reactions

A protocol for conducting Suzuki reactions in a plate format amenable to use in library synthesis of biaryl compounds has been developed. A key objective was to determine reaction conditions which give biaryl products containing <10 ppm of Pd for a wide variety of building blocks. A Design of Experiments (DoE) approach for the identification of an optimised set of reaction conditions was successfully applied. The utility of the protocol developed has been demonstrated by preparation of an array of 96 biaryl compounds in a parallel fashion.     

Foaming in aqueous solutions of zwitterionic surfactant: Effects of oil and salts

This paper reports a study on the stability of foams generated from the aqueous solutions of the zwitterionic surfactant, N-Dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate, in presence of NaCl, CaCl₂ and AlCl₃. The effect of oil (i.e. n-hexane) on foam was also studied. The surface and interfacial tensions were measured. These tensions and the CMC decreased upon salt addition, signifying an increased adsorption of the surfactant molecules at the interface. The quantity of salt required for reducing the surface tension and CMC was in the sequence: NaCl > CaCl₂ > AlCl₃. The salts had a pronounced effect on the foaming characteristics, i.e. they reduced the initial foam volume. The effectiveness of salts in reducing the foam stability followed the sequence: AlCl₃ > CaCl₂ > NaCl. However, the foam collapse rate was reduced in the presence of salt. The presence of oil decreased the foam volume and reduced its stability. The entering, bridging, and spreading coefficients were calculated, which explained the stability of foams in presence of oil.     

Synthesis of ent-kaurane diterpene monoglycosides

Synthesis of two ent-kaurane diterpene glycosides, steviol 19-O-β-D-glucopyranosiduronic acid (steviol glucuronide, 5), and 13-hydroxy ent-kaur-16-en-19-oic acid-β-D-glucopyranosyl ester (7) has been achieved from a common starting material, steviol, using phase transfer catalyst. Also, synthesis of an additional 17-nor-ent-kaurane glycoside, namely 13-methyl-16-oxo-17-nor-ent-kauran-19-oic acid-β-D-glucopyranosyl ester (10) was performed using the starting material isosteviol and similar synthetic methodology. Synthesis of all three steviol glycosides was performed using straightforward chemistry and their structures were characterized on the basis of 1D and 2D NMR as well as mass spectral (MS) data.     

Electrochemical performances of LiMnPO4 synthesized from non-stoichiometric Li/Mn ratio

In this paper, the influences of the lithium content in the starting materials on the final performances of as-prepared Li(x)MnPO(4) (x hereafter represents the starting Li content in the synthesis step which does not necessarily mean that Li(x)MnPO(4) is a single phase solid solution in this work.) are systematically investigated. It has been revealed that Mn(2)P(2)O(7) is the main impurity when Li < 1.0 while Li(3)PO(4) begins to form once x > 1.0. The interactions between Mn(2)P(2)O(7) or Li(3)PO(4) impurities and LiMnPO(4) are studied in terms of the structural, electrochemical, and magnetic properties. At a slow rate of C/50, the reversible capacity of both Li(0.5)MnPO(4) and Li(0.8)MnPO(4) increases with cycling. This indicates a gradual activation of more sites to accommodate a reversible diffusion of Li(+) ions that may be related to the interaction between Mn(2)P(2)O(7) and LiMnPO(4) nanoparticles. Among all of the different compositions, Li(1.1)MnPO(4) exhibits the most stable cycling ability probably because of the existence of a trace amount of Li(3)PO(4) impurity that functions as a solid-state electrolyte on the surface. The magnetic properties and X-ray absorption spectroscopy (XAS) of the MnPO(4)·H(2)O precursor, pure and carbon-coated Li(x)MnPO(4) are also investigated to identify the key steps involved in preparing a high-performance LiMnPO(4).     

Connections between quantum chromodynamics and condensed matter physics

Features of QCD can be seen qualitatively in certain condensed matter systems. Recently some of the analyses that originated in condensed matter physics have found applications in QCD. Using examples we discuss some of the connections between the two fields and show how progress can be made by exploiting this connection. Some of the challenges that remain in the two fields are quite similar. We argue that recent algorithmic developments call for optimism in both fields.     

Direct hydrothermal synthesis of metal intercalated hexagonal molybdates, M + x Mo6? x /3O18? x (OH)x.yH2O (M = Li, Rb, Cs, NH4)

Here we report direct hydrothermal synthesis of a few hexagonal molybdates with composition, M _x ^/+ Mo _6−x ^{Emphasis>/3/6+} O_18−x (OH) _x .yH₂O (M = Li, Rb, Cs, NH₄). The molybdates crystallize in the space groupP6 ₃ /m with a r∼ 10.5 andc r∼ 3.7 ? . Unlike previous studies, our work suggests that hexagonal molybdates could be stabilized in the presence of monovalent cations with varying ionic size (smaller lithium to larger cesium) under hydrothermal condition. The phases showed exceptional thermal stability till 550°C. Dedicated to Professor C N R Rao on his 70th birthday