Nanodiamond Decorated with Silver Nanoparticles as a Sensitive Film Modifier in a Jeweled Electrochemical Sensor: Application to Voltammetric Determination of Thioridazine

Nanodiamond? graphite (NDG) decorated with Ag nanoparticles (AgNPs‐NDG) was prepared and used to construct a novel sensitive sensor for the voltammetric determination of thioridazine (TR). The results indicate a remarkable increase in the oxidation peak currents together with a negative shift in the oxidation peak potentials, in comparison to the bare pyrolytic graphite electrode. Remarkable enhancement in microscopic area of the electrode along with strong adsorption of TR on the surface of the modified electrode resulted in a considerable increase in the peak current of TR. The surface morphology and the nature of the composite film deposited on PGE were characterized by scanning electron microscopy, atomic force microscopy, cyclic voltammetry and electrochemical impedance spectroscopy. Experimental variables, such as the deposited amount of the modifier suspension, pH of the supporting electrolyte, the accumulation potential and time are optimized by monitoring the CV responses of TR. Under the optimal conditions, the modified electrode showed a wide linear response to the concentration of TR in the range of 0.08–100 µM with a detection limit of 0.01 µM. The prepared modified electrode showed several advantages: simple preparation method, high stability and uniformity in the composite film, high sensitivity, long‐term stability and remarkable voltammetric reproducibility in response to TR. The modified electrode can be successfully applied for accurate determination of trace amounts of TR in pharmaceutical and clinical preparations.     

Electrochemical determination of piroxicam on the surface of pyrolytic graphite electrode modified with a film of carbon nanoparticle-chitosan

The electrochemical behavior of the anti-inflammatory drug piroxicam is studied at the surface of a plain pyrolytic graphite electrode modified with chitosan-doped carbon nanoparticles. An electroactive surface was produced by drop-casting a suspension of the modifier and characterized by atomic force microscopy. A remarkable enhancement is found in studies on the cyclic voltammetric response towards piroxicam. This is described on the basis of the thin-layer mass transport regimes within the porous films, which leads to a considerable increase in the active surface area of the electrode. The electrode shows a linear response to piroxicam in the range of 0.05–50 μM, with a detection limit of 25 nM (at S/N of 3). The electrode was successfully applied to the determination of piroxicam in pharmaceutical and clinical preparations with satisfactory accuracy and precision.     

Investigation of the Electrochemical Behavior of Mesalazine on the Surface of a Glassy Carbon Electrode Modified with CNT/PPY Doped by 1,5‐Naphthalenedisulfonic Acid

A glassy carbon electrode (GCE) was modified with a thin layer of multiwalled carbon nanotubes (MWCNTs) and subsequently, electrochemically deposited poly‐pyrrole. The electrochemical behavior of mesalazine was studied on the surface of the modified electrode by applying linear sweep voltammetry (LSV). The electropolymerization process and the electrochemical response toward mesalazine were investigated in the presence of different aromatic anion dopants including, benzenesulfonic acid (BSA), 1,3‐benzenedisulfonic acid (1,3‐BDSA), 1,5‐naphthalenedisulfonic acid (1,5‐NDSA) and new coccine (NC). By using 1,5‐NDSA as dopant, a significant increase (～418 times) in the peak current of mesalazine was observed, in comparison to the bare GCE. Experimental variables such as drop size of the cast MWCNTs suspension, pH of the supporting electrolyte, accumulation conditions and the number of scans in the electropolymerization process were optimized by monitoring the LSV responses of mesalazine. Under the optimum conditions, two linear dynamic ranges of 0.01–0.1 µmol L^?1 and 0.1–1.0 µmol L^?1 with a detection limit of 3 nmol L^?1 were resulted for the voltammetric determination of mesalazine. The prepared electrode showed high sensitivity, stability and good reproducibility for determination of mesalazine. These properties made the prepared sensor suitable for the determination of mesalazine in pharmaceutical and clinical preparations.     

Electrodeposition of Copper Oxide Nanoparticles on Precasted Carbon Nanoparticles Film for Electrochemical Investigation of anti‐HIV Drug Nevirapine

This work describes the development of a novel electrochemical sensor based on electrodeposition of copper oxide nanoparticles onto carbon nanoparticle (CNP) film modified electrode for the analysis of the anti‐HIV drug, nevirapine (NEV). The electrochemical experiments were performed using linear sweep and cyclic voltammetry. Atomic force microscopy was applied for surface characterization of the deposited modifier film (CuO‐CNP) on glassy carbon electrode (GCE). No oxidation peak was observed for NEV on the bare GCE, but both CNP‐GCE and CuO‐CNP‐GCE showed a distinctive anodic response towards NEV with considerable enhancement (276‐fold and 350‐fold, respectively) compared to CuO‐GCE. The mechanism of the electrocatalytic process on the modified electrode surface was investigated by cyclic and linear sweep voltammetry at various potential sweep rates and pHs of the buffer solutions. The modified electrode exhibited linear dynamic range in three concentration intervals (0.1–0.8, 1–10 and 10–100 µM) with a detection limit of 66 nM. The stability, reproducibility, and repetitive usability exhibited by the proposed modified electrode are good enough to make it a suitable sensor for the determination of NEV in real samples with complex matrices such as human blood serum.     

Nanocellulose/Carbon Nanoparticles Nanocomposite Film Modified Electrode for Durable and Sensitive Electrochemical Determination of Metoclopramide

A novel electrochemical sensor based on nanocellulose‐carbon nanoparticles (NC‐CNPs) nanocomposite film modified glassy carbon electrode (GCE) is developed for the analysis of metoclopramide (MCP). Atomic force microscopy, scanning electron microscopy and electrochemical impedance spectroscopy were used to characterize the roughness, surface morphology and performance of the deposited modifier film on GCE. SEM image demonstrated that modifier nanoparticles are uniformly deposited on GCE, with an average size of less than 50 nm. The electrochemical behavior of MCP and its oxidation product is studied using linear sweep and cyclic voltammetry over a wide pH range on NC‐CNPs modified glassy carbon electrode. The results revealed that the oxidation of MCP is an irreversible and pH‐dependent process that proceeds in an adsorption‐controlled mechanism and results in the formation of a main oxidation product, which adsorbs on the surface of NC‐CNPs/ GCE. The modified electrode showed a distinctive anodic response towards MCP with a considerable enhancement (49 fold) compared to the bare GCE. Under the optimized conditions, the modified electrode exhibited a wide linear dynamic range of 0.06–2.00 µM with a detection limit of 6 nM for the voltammetric determination of MCP. The prepared modified electrode showed several advantages such as simple preparation method, high stability, reproducibility, and repetitive usability. The modified electrode is successfully applied for the accurate determination of trace amounts of MCP in pharmaceutical and clinical preparations.     

Electrochemical Redox Behaviour of Temozolomide Using a Glassy Carbon Electrode

The electrochemical behaviour of temozolomide on a glassy carbon electrode has been investigated. The reduction of temozolomide is an irreversible process, pH dependent, and the mechanism involves the addition of one electron and one proton to C5 to form an anion radical, causing the irreversible breakdown of the tetrazinone ring. The oxidation mechanism of temozolomide is an irreversible, adsorption‐controlled process, pH dependent up to value close to the pK_a and occurs in two consecutive charge transfer reactions, with the formation of the hydroxylated product. The electroanalytical determination of TMZ led to a detection limit of 1.1 µM.     

Potentiometric membrane sensors based on zirconyl(IV) phthalocyanine for detection of sulfosalicylic acid

A metallophthalocyanine complex with zirconium(IV) ion in the center (as an oxo-zirconium, Zr=O, group) was used in poly vinyl chloride (PVC) membranes for the selective detection of 5-sulfosalicylic acid (SSA). The resulting electrodes demonstrate Nernstian responses over a wide range of sulfosalicylic acid concentration (10⁻⁶ to 10⁻¹ mol dm⁻³) with a slope of about −29 mV per decade. The influence of lipophilic ion-exchanger sites on the response properties of the electrodes was investigated. The optimal potentiometric response was observed for the electrode in the presence of about 150 mol% of cationic additive (relative to ionophore) in the phase membrane. The electrodes have a fast response time, micromolar detection limit and good long-term stability (more than 2 months). The feasibility of the application of these sensors for the potentiometric titration of iron in solutions that were prepared from magnetite samples was investigated.     

Ultrathin Carbon Nanoparticle Composite Film Electrodes: Distinguishing Dopamine and Ascorbate

Ultrathin carbon nanoparticle–poly(diallyldimethylammonium chloride) films (CNP‐PDDAC films) are formed on tin‐doped indium oxide (ITO) electrodes in a layer‐by‐layer electrostatic deposition process employing 9–18 nm diameter carbon particles. Transparent and strongly adhering films of high electrical conductivity are formed and characterized in terms of their electrochemical reactivity. When immersed in aqueous 0.1 M phosphate buffer pH 7, each layer of CNP‐PDDAC (of ca. 5–6 nm average thickness) is adding an interfacial capacitance of ca. 10 μF cm^?2. Absorption into the CNP–PDDAC nanocomposite film is dominated by the sites in the PDDAC cationomer and therefore anionic molecules such as indigo carmine are strongly bound and retained within the film (cationic binding sites per layer ca. 150 pmol cm^?2). In contrast, cationic redox systems such as ferrocenylmethyltrimethyl‐ammonium⁺ fail to bind. For solution phase redox systems such as hydroquinone, the rate of electron transfer is dramatically affected by the CNP‐PDDAC film and switched from completely irreversible to highly reversible even with a single layer of carbon nanoparticles. For the mixed redox system ascorbate–dopamine in 0.1 M phosphate buffer pH 7 cyclic voltammograms suggest a rapid and selective temporary poisoning process which causes the ascorbate oxidation to be suppressed in the second potential cycle. This effect is exploited for the detection of micromolar concentrations of dopamine in the presence of millimolar ascorbate.     

Fabrication of an electrochemical sensor based on the electrodeposition of Pt nanoparticles on multiwalled carbon nanotubes film for voltammetric determination of ceftriaxone in the presence of lidocaine, assisted by factorial-based response-surface methodology

A glassy carbon electrode (GCE) is modified with platinum nanoparticle (PtNPs) decorated multiwalled carbon nanotube (MWCNT). The modified electrode is applied for the determination of ceftriaxone (CFX) in the presence of lidocaine. Different methods were used to characterize the surface morphology of the modified electrode. The electrochemical behavior of CFX was investigated at GCE, MWCNT/GCE and PtNPs/MWCNT/GCE. A factorial-based response-surface methodology was used to find out the optimum conditions with minimum number of experiments. Under the optimized conditions, oxidation peak currents increased linearly with CFX concentration in the range of 0.01–10.00 μM with a detection limit of 9.01 nM. The results prove that the modified electrode is also suitable for the determination of CFX in pharmaceutical and clinical preparations.