Annealing of ion-implanted Ga0.47In0.53As

We have investigated annealing of ion-implanted GaInAs using transmission electron microscopy. We have found that the best condition for the post-implantation anneals for GalnAs is a 30 second anneal at a temperature of 700–800°C. This produces a material similar in character to the untreated GaInAs. Anneals for longer than 30 seconds produce crystal defects becoming increasingly complex with time for similar temperatures.     

SEM and Raman spectroscopy analyses of laser-induced periodic surface structures grown by ethanol-assisted femtosecond laser ablation of chromium

The effect of fluence and pulse duration on the growth of nanostructures on chromium (Cr) surfaces has been investigated upon irradiation of femtosecond (fs) laser pulses in a liquid confined environment of ethanol. In order to explore the effect of fluence, targets were exposed to 1000 pulses at various peak fluences ranging from 4.7 to 11.8?J?cm^–2 for pulse duration of ～25?fs. In order to explore the effect of pulse duration, targets were exposed to fs laser pulses of various pulse durations ranging from 25 to 100?fs, for a constant fluence of 11.8?J?cm^–2. Surface morphology and structural transformations have been analyzed by scanning electron microscopy and Raman spectroscopy, respectively. After laser irradiation, disordered sputtered surface with intense melting and cracking is obtained at the central ablated areas, which are augmented with increasing laser fluence due to enhanced thermal effects. At the peripheral ablated areas, where local fluence is approximately in the range of 1.4–4?mJ?cm^–2, very well-defined laser-induced periodic surface structures (LIPSS) with periodicity ranging from 270 to 370?nm along with dot-like structures are formed. As far as the pulse duration is concerned, a significant effect on the surface modification of Cr has been revealed. In the central ablated areas, for the shortest pulse duration (25?fs), only melting has been observed. However, LIPSS with dot-like structures and droplets have been grown for longer pulse durations. The periodicity of LIPSS increases and density of dot-like structures decreases with increasing pulse duration. The chemical and structural modifications of irradiated Cr have been revealed by Raman spectroscopy. It confirms the formation of new bands of chromium oxides and enol complexes or Cr-carbonyl compounds. The peak intensities of identified bands are dependent upon laser fluence and pulse duration.     

Effect of ring substitution on synthesis of benzimidazolium salts and their silver(I) complexes: characterization,electrochemical studies and evaluation of anticancer potential

Transition Metal Chemistry - A series of bidendate 5,6-dimethyl benzimidazolium-based N-heterocyclic carbene (NHC) proligands and their silver complexes were synthesized. The synthetic approaches...     

Impact of laser produced X-rays on the surface of gold

In the paper an attempt has been made to use the laser-induced plasma as an X-ray source for the growth of nanostructures on the surface of gold. For this purpose, an Nd:YAG laser operated at second harmonics (λ = 532 nm, E = 400 mJ) is used to produce plasma from analytical grade 5N pure Al, Cu and W targets. An analytical grade (5N pure) gold substrate was irradiated by X-rays generated from Al, Cu and W plasma under the vacuum ∼10⁻⁴ Torr. The surface was analyzed by two techniques, XRD and AFM. The aberrations in the XRD peaks show that there are significant structural changes in the exposed gold, in terms of decreased reflection intensities, increased dislocation line density, changes in the d-spacing and disturbance in the periodicity of the planes. AFM used to explore the topography of the irradiated gold reveals that regardless of the source, nm sized hillocks have been produced on the gold surface. The roughness of the surface has increased due to the growth of these hillocks.     

Total Fragmentation Cross Section of 158A GeV Lead Projectiles in Cu Target

Total fragmentation cross section for the reaction 158A Pb ions ＋ Cu target is measured using the most sensitive track detector CR-39. Measured values are compared with calculations. Exposures of target-detector stack with 158A P5 projectiles are made at CERN-SPS beam facility. Results of calibration of CR-39 detector in a charge region （63 ≤ Z ≤ 83） are also reported, which can be used for high energy particle identification using CR-39 and in determination of partial charge changing cross sections. The charge resolution δz achieved by this technique is about 0.2e. A systematic dependence of total fragmentation cross section on target properties is revealed and the corresponding results are presented.     

Structure elucidation,DNA binding,DFT, molecular docking and cytotoxic activity studies on novel single crystal (E)-1-(2-fluorobenzylidene)thiosemicarbazide

Compound 3 {(E)-1-(2-fluorobenzylidene)thiosemicarbazide} – a new Schiff base of thiosemicarbazide has been synthesized, characterized and reported for crystal structure. Planer side chain in the crystal structure was observed co-planer with aromatic ring plane and molecules were connected into centrosymmetric dimmers via intermolecular hydrogen bonding. DFT geometry optimization and the relevant quantum parameters indicated unstable and reactive nature of compound 3. Experimental and theoretical findings for DNA binding by UV–visible, cyclic voltammetry and molecular docking studies showed consistency in kinetic (K_b) and thermodynamic (ΔG) parameters and that compound 3 significantly interacted with DNA via intercalation. Viscometric analysis further comprehended intercalation as possible binding mode of the compound with DNA and non-denaturing of DNA in the presence of 10% aqueous DMSO. Docked parameters further assured the drug like characteristics of the investigated compound as fit in Lipinski’s criteria. Dose dependant cytotoxic activity of compound 3 against human Huh-7 cell line indicated its anti-cancer potential at 100?µg/ml concentration.     

Investigation of 500 keV Si ion induced surface structuring of Ni and Ti for enhancement of field emission properties

The present paper reports the investigation of surface morphology, elemental composition, phase changes and field emission properties of Si ion irradiated nickel (Ni) and titanium (Ti). The Ni and Ti targets have been irradiated with 500 keV Si ions generated by Pelletron accelerator at various fluences ranging from 6.9 × 10¹³ to 77.1 × 10¹³ ions/cm². Stopping range of ions in matter analysis revealed higher values of electronic stopping and sputtering yield for Ni as compared with Ti. For both irradiated metals, electronic energy loss dominant over the nuclear stopping. The growth of induced surface structures have been analysed by using field emission scanning electron microscopy (FESEM) analysis. In case of Ni, as the ion fluence increases from 6.9 × 10¹³ to 65.8 × 10¹³ ions/cm², the formation of spherical particulates, agglomers and sputtering is observed. Although in the case of Ti, with the increase of Si ion fluence from 11.6 × 10¹³ to 77.1 × 10¹³ ions/cm², the formation of irregular-shaped particulates along with crater and sputtered channels is observed. X-ray diffraction (XRD) analysis shows that no new phase is identified. However, a significant increase in peak intensity is observed with increasing ion fluence. The variation in crystallite size and dislocation line density is also observed as a function of Si ion fluence. Fourier transform infrared spectroscopy analysis shows that no bands are formed after the Si ion irradiation. Field emission properties of ion-structured Ni and Ti are well correlated with the growth of surface structures observed by SEM and dislocation line density evaluated by XRD analysis.     

In-situ copolymerization of aniline with alkyl amine by APS： Kinetics and application

The kinetic study of in-situ eopolymerization of aniline with o- and p-methylaniline by ammonium persulfate （APS） has been carried out. UV-vis spectroscopic method was used to investigate the course of copolymerization. Structural characterization was studied by PT-IR spectral analysis. The electronic spectra of the copolymers poly（aniline-co-p-toluidine） and poly（aniline-co-o- toluidine） show blue shift. The shift has been observed in the bands corresponding to π→π^＊ transition as well as in the exciton transition. The increase in absorbance recorded during the reaction for different concentration of aniline, o- and p-toluidine at various intervals of time of polymerization reaction indicates a growth in the polymer formation. The resulting first-order rate constant was used to calculate the rate of copolymer formation using the rate equation -d[A]/dt = kc^n.