Optimization of Wall Material of Freeze-Dried High-Bioactive Microcapsules with Yellow Onion Rejects Using Simplex Centroid Mixture Design Approach Based on Whey Protein Isolate,Pectin, and Sodium Caseinate as Incorporated Variables

For the food sector, onion rejects are an appealing source of value-added byproducts. Bioactive compounds were recovered from yellow onion rejects using a pulse electric field process at 6000 v and 60 pulses. The onion extract was encapsulated with whey protein isolate (WPI), pectin (P), and sodium caseinate (SC) with a mass ratio of 1:5 (extract/wall material, w/w). A Simplex lattice with augmented axial points in the mixture design was applied for the optimization of wall material for the encapsulation of onion reject extract by freeze-drying (FD). The optimal wall materials were 47.6 g/100 g (SC), 10.0 g/100 g (P), and 42.4 g/100 g (WPI), with encapsulation yield (EY) of 85.1%, total phenolic content (TPC) of 48.7 mg gallic acid equivalent/g DW, total flavonoid content (TFC) of 92.0 mg quercetin equivalent/g DW, and DPPH capacity of 76.1%, respectively. The morphological properties of the optimal encapsulate demonstrated spherical particles with a rough surface. At optimal conditions, the minimum inhibitory concentration (MIC) of the extract (mean diameter of inhibition zone: 18.8 mm) was shown as antifungal activity against Aspergillus niger.     

Microwave-assisted Knoevenagel condensation in aqueous over triazine-based microporous network

A high nitrogen-containing triazine-based microporous polymeric (TMP) network was used as an efficient metal-free catalyst for Knoevenagel condensation of ethylcyanoacetate with aromatic aldehydes. The reactions were performed in water as an environmentally benign medium, under microwave irradiation within a short reaction time of 10 min. The conversions of substituted aromatic aldehydes and selectivities for Knoevenagel products were found to be in the ranges of 44–99 and 65–99 %, respectively. The electron-withdrawing substituent showed higher conversion and selectivity as compared to electron-donating substituents. The TMP network can be readily recovered and reused up to three runs without loss in catalytic activity and selectivity.     

Headspace-solid phase microextraction of selenium(IV) from human blood and water samples using polypyrrole film and analysis with ion mobility spectrometry

The analysis of incurred material from animals treated with pharmacologically active substances is an efficient way to check the accuracy of a method. Tylosin A was chosen for the preparation of that material because it is highly effective in controlling active infections of American Foulbrood (AFB), a global threat to apiculture, but residues in honey are not allowed according to European legislation. For this reason an in-house reference material of honey containing the macrolide tylosin A and its degradation product desmycosin (tylosin B) was prepared. After the treatment of a beehive with the appropriate macrolide tylosin A, the honey samples were collected. The incurred honey material was diluted by mixing with blank honey. Concentrations of 25.81 μg kg(-1) for tylosin A and of 19.28 μg kg(-1) for its degradation product desmycosin (tylosin B) were reached. The homogeneity was checked by analysing 12 bottles in duplicate. The stability was tested at different defined temperatures and storage conditions. The reference material described above was homogeneous and stable. Samples of this in-house reference material were used for the realisation of a proficiency test with international participation. All participants accomplished satisfying results with the exception of one laboratory.     

Anodic Stripping Voltammetric Determination of Iron(II) at a Carbon Paste Electrode Modified with Dithiodianiline (DTDA) and Gold Nanoparticles (GNP)

A differential pulse anodic stripping voltammetric procedure was developed for the determination of trace amounts of iron(II) in the presence of iron(III) at a carbon paste electrode (CPE) modified with dithiodianiline and gold nanoparticle. At the pH working of 3.0, a wide concentration range from 0.1 nM to 100 nM was observed with the detection limit of 0.05 nM. The relative standard deviation for a solution containing 50 nM of iron(II) was found to be 3.11 % (n=9). Possible interferences from the coexisting ions were also investigated. The validity of the method and applicability of the sensor were successfully tested by determining of iron(II) in lentil, wheat seed and barley seed samples.     

Chitosan surface modified hydrogel as a therapeutic contact lens

Therapeutic contact lenses have attracted significant attention during the last decades. In this study, we used chitosan‐conjugated poly(2‐hydroxyethyl methacrylate) (PHEMA) for contact lens application. We aimed to increase affinity of anionic drugs, which are used in treatment of eye diseases. In this regard, we evaluated delivery of the small molecule anionic drug, ascorbic acid from the chitosan‐conjugated PHEMA. Chitosan immobilization improves drug loading efficiency and induces sustained release of ascorbic acid. The chitosan modified hydrogel also reduces the biofouling of tear fluid components. Our results showed that surface modification by chitosan inhibits protein and bacterial deposition on the contact lens. Protein absorption analysis revealed that neat PHEMA adsorbed tear proteins at a density of 28.4 ± 4.4 μg/cm², whereas the chitosan‐conjugated hydrogel adsorbed tear proteins at a density of 18.5 ± 1.8 μg/cm². Moreover, the neat PHEMA bacterial adhesion had a mean CFU value of 273 ± 27. However, a significant decrease in the number of bacterial colonies was observed in the chitosan group with a CFU value of 9 ± 6.     

Magnetic nanofibrous polyaniline nanocomposite for solid-phase extraction of naproxen from biological samples prior to its spectrofluorimetric determination

Nanofibrous polyaniline–magnetite (PANI/Fe₃O₄) nanocomposite was in situ prepared through adsorption of magnetite nanoparticles onto PANI nanofibers surface and utilized as an efficient sorbent for magnetic solid-phase extraction of naproxen from water and biological samples, followed a desorption step and spectrofluorimetric determination. Field-emission scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, thermal gravimetric analysis and X-ray diffraction techniques were employed for characterization of the prepared nanocomposite. The important parameters influencing the extraction efficiency including PANI/Fe₃O₄ mass ratio, adsorbent dose, extraction time, sample solution pH, ionic strength, type and volume of desorption solvent and the elution time were studied and optimized. The investigated nanocomposite was successfully applied to the extraction of naproxen in spiked tap water, urine and plasma samples, with a relative recovery in the range of 90–98%. The reusability of PANI/Fe₃O₄ was examined for ten successive cycles, and the results confirm that the efficiency did not change significantly. A linear calibration plot was obtained in the range of 40–1000 ng mL^?1 with a limit of detection about 17 ng mL^?1 under the optimum conditions. The relative standard deviation (RSD) was found to be 2.34% (n = 8, concentration level of 100 ng mL^?1). The kinetics and thermodynamics of the extraction process were also studied.     

Determination of gold fineness by laser induced breakdown spectroscopy with the simultaneous use of CW-CO2 and Q-SW Nd:YAG lasers

In this work, the gold fineness is precisely determined using the dual beam arrangement including simultaneous irradiation of CW-CO₂ and Q-SW Nd:YAG lasers. It was shown that the enhancement of the characteristic emission lines occurs at higher temperatures with minimal surface distortion of the target respect to that of single beam exposure. The accuracy of gold concentration was determined to be as low as 0.7% using calibration-free (CF) method.     

Transesterification Reaction of Dimethyl Terephthalate by 2-Ethylhexanol in the Presence of Heterogeneous Catalysts under Solvent-free Condition

In this study, the synthesis of bis-（2-ethylhexyl） terephthalate, via the transesterification reaction of dimethyl terephthalate （DMT） by 2-ethylhexanol in the presence of different heterogeneous catalysts, such as Pb（OAc）2·3H2O, Cd（OAc）2·2H2O, Zn（OAc）2·2H2O, Hg（OAc）2·Ca（OAc）2·H2O, Cu（OAc）2·H2O, NaOAc, CaCO3, CaO, ZnSO4·7H2O, and sulfated zirconia, has been investigated. The reactivity of the catalysts in the reaction progress has been studied and compared. It was found that, hydrated cadmium acetate and sulfated zirconia were reactive catalysts to this reaction. The extent of transesterification of methyl ester groups reached up to 93% and 85.6% using these catalysts, respectively.