A redox-reconfigurable, ambidextrous asymmetric catalyst

A redox-reconfigurable catalyst derived from L-methionine and incorporating catalytic urea groups has been synthesized. This copper complex catalyzes the enantioselective addition of diethyl malonate to trans-β-nitrostyrene. Either enantiomer of the product can be predetermined by selection of the oxidation state of the copper ion. Enantiomeric excesses of up to 72% (S) and 70% (R) were obtained in acetonitrile. The ability of the catalyst to invert enantiomeric preference was reproduced with several different solvents and bases. Facile interconversion between the Cu(2+) and Cu(+) redox states allowed easy access to both active helical forms of the complex and, therefore, dial-in enantioselectivity.     

On-line solid phase extraction coupled to ICP-OES for simultaneous preconcentration and determination of some transition elements

An on-line solid phase extraction method coupled to ICP-OES was developed for the simultaneous determination of Ce(III), La(III), Sm(III), Y(III), Yb(III), Dy(III), Hf(IV), Zr(IV) and Th(IV) ions in aqueous samples. The ions forming hydrophobic complexes with 3,5,7,2?,4?-pentahydroxy flavone (morin) and were retained on an octadecyl silica (C₁₈) minicolumn. The adsorbed chelates were subsequently eluted from the column and directly transferred into the plasma with 80% (v/v) propanol:H₂O solution for the simultaneous determination of the metal ions. Different parameters affecting the ICP-OES signal intensities and extraction efficiency including pH of the solution, concentration of the chelating agent, flow rate and type of the eluent, loading rate and ionic strength were evaluated and optimized. The calibration graphs were linear in the range of 0.2–100 μg L^?1 and limit of detections for the extraction and determination of the ions in the aqueous sample (25 mL) were in the range 0.10–0.46 μg L^?1. The enhancement factors of the method for the metal ions obtained were in the range of 23 to 242 (V _Sample?=?25 mL) and the precision expressed as relative standard deviations (RSD %) was below 6.9%. Finally, the method was successfully applied to determine the target analytes in natural water samples.     

Training Multilayer Perceptron with Genetic Algorithms and Particle Swarm Optimization for Modeling Stock Price Index Prediction

Predicting stock market (SM) trends is an issue of great interest among researchers, investors and traders since the successful prediction of SMs’ direction may promise various benefits. Because of the fairly nonlinear nature of the historical data, accurate estimation of the SM direction is a rather challenging issue. The aim of this study is to present a novel machine learning (ML) model to forecast the movement of the Borsa Istanbul (BIST) 100 index. Modeling was performed by multilayer perceptron–genetic algorithms (MLP–GA) and multilayer perceptron–particle swarm optimization (MLP–PSO) in two scenarios considering Tanh (x) and the default Gaussian function as the output function. The historical financial time series data utilized in this research is from 1996 to 2020, consisting of nine technical indicators. Results are assessed using Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE) and correlation coefficient values to compare the accuracy and performance of the developed models. Based on the results, the involvement of the Tanh (x) as the output function, improved the accuracy of models compared with the default Gaussian function, significantly. MLP–PSO with population size 125, followed by MLP–GA with population size 50, provided higher accuracy for testing, reporting RMSE of 0.732583 and 0.733063, MAPE of 28.16%, 29.09% and correlation coefficient of 0.694 and 0.695, respectively. According to the results, using the hybrid ML method could successfully improve the prediction accuracy.     

Determination of gauche and trans proton vicinal coupling constant Jg and Jt for 1,2-dichloropropane as a model compound for 1,2-disubstituted and 1,2,3-trisubstituted profanes

Variations in temperature and nature of solvent lead to changes in the population of the three rotamers of the title compounds in solution. The medium can be adjusted in this way so that either equality in the population of the three rotamers is reached, or the population of the conformer with two gauche interactions is decreased to near zero. These two limits are used to calculate J_t and J_g, for 1,2-dichloropropane.     

Polymeric alkenoxy amino acid surfactants: III. Chiral separations of binaphthyl derivatives

Micellar electrokinetic chromatography (MEKC) was investigated for the enantiomeric separations of three binaphthyl derivatives ((+/-)-1,1'-bi-(2-naphthol) (BOH), (+/-)-1,1'-binaphthyl-2,2'-diyl hydrogenphosphate (BNP), and (+/-)-1,1'-binaphthyl-2,2'-diamine (BNA)) using two recently synthesized chiral polymeric surfactants (polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL)) in our laboratory. Enantiomeric separation (resolution and selectivity) of the binaphthyl derivatives was influenced by polymerization concentration of the monomeric surfactant, pH, type and concentration of the background electrolyte (BGE) as well as concentration of the polymeric surfactant. Two BGEs (dibasic phosphate and Tris-borate) were compared for this study. The use of dibasic phosphate as BGE in poly-L-SUCL provides baseline resolution of (+/-) BOH and (+/-) BNP, however, no resolution and selectivity at all was observed for (+/-) BNA. A similar approach was adopted with Tris-borate-poly-L-SUCL system at fixed pH 10.1, which resulted in baseline resolution of all three binaphthyl derivatives. Although R(s) of binaphthyl derivatives was always higher and electroosmotic flow (EOF) was always lower using Tris-borate than with dibasic phosphate, the selectivity values for the two buffer systems did not differ significantly. In addition, it was found that poly-L-SUCL provided better enantiomeric resolution and selectivity for (+/-) BOH and (+/-) BNA, while poly-L-SUCIL provided enhanced enantiomeric resolution but similar enantioselectivity for (+/-) BNP. This indicates that the depth of analyte penetration into the palisade layer and the micellar core are responsible for chiral recognition of hydrophobic analyte (e.g., (+/-) BOH, and (+/-) BNA) whereas for moderately hydrophobic analyte (e.g., (+/-) BNP) interaction with the polar head group seems to dictate chiral recognition. Simultaneous enantioresolution of all three binaphthyl derivatives was possible in a single electrophoretic run using either poly-L-SUCL or poly-L-SUCIL. Further comparison of the two polymeric surfactants showed that poly-L-SUCL provided slightly longer analysis time than poly-L-SUCIL but the use of the former polymeric surfactant should be preferred due to its ability to provide complete baseline resolution and higher selectivity of all the three atropisomers with a wider chiral window.     

Capillary electrophoresis-mass spectrometry: recent advances to the analysis of small achiral and chiral solutes

We describe here the state-of-the-art development of on-line capillary electrophoresis-mass spectrometry (CE-MS) over the last two years. Technological developments included are novel designs of new interfaces and ionization sources, new capillary coatings, buffers, and micelles as well as application of various modes of CE-MS published in the recent literature. The areas of CE-MS application in analysis of small achiral and chiral solutes are covered in sections that highlight the recent advances and possibilities of each mode of CE-MS. Application areas reviewed in this paper include achiral and chiral pharmaceuticals, agrochemicals, carbohydrates, and small peptides. The separation of enantiomers using micellar electrokinetic chromatography (MEKC)-MS with molecular micelles and capillary electrochromatography (CEC)-MS using pack tapered columns appears to provide good tolerance to electrospray stability for routine on-line CE-MS. These two modes seem to be very suitable for sensitive detection of chiral pharmaceuticals in biological samples, but their use will probably increase in the near future. Overall, it seems that one mode of CE-MS, in particular capillary zone electrophoresis (CZE)-MS, is now recognized as established technique for analysis of small charged solutes, but other modes, such as MEKC-MS and CEC-MS, are still within a period of development in terms of both MS-compatible pseudostationary phases and columns as well as applications.     

Organotins as a Locking Agent in the Formation of Dinuclear Complexes

In this paper the synthesis and characterization of new heterobimetallic compounds with a ligand derived from diacetylpyridine, hydrazine and salicylaldehyde has been reported. The open end of the ligand was locked with R₂SnCl₂ followed by the insertion of a transition metal ion in the cavity thus formed by locking the ligand. These compounds are characterized by TGA/DSC, IR, ¹H and ¹³CNMR, electronic spectra, magnetic moment and conductivity measurements. The disappearance of ν(O–H) and appearance of ν(Sn–O) in the IR spectrum of the Sn(saldp)R₂ {where saldp = bis(salicylaldehydehydrazone)diacetylpyridine and R = –CH₃, –C₄H₉} suggests the complex formation with R₂SnCl₂. The IR spectra of the complexes exhibited a blue shift in ν(C=N) indicating coordination of the azomethine nitrogen. The complexes are non-electrolytes in DMSO. The ¹HNMR and ¹³CNMR spectra of the complexes are not much different from that of the free ligand except for the disappearance of the signal at 9 ppm due to phenolic protons. The methyl or butyl protons attached to the tin appear at their usual places. The TGA profile of the ligand and its mononuclear complexes exhibit a three-step pyrolysis, although the binuclear complexes decompose in two steps leaving behind tin oxide as the final product.     

Brush-type chiral stationary phase for enantioseparation of acidic compounds. Optimization of chiral capillary electrochromatographic parameters

The capillary electrochromatographic separations of three acidic enantiomers (carprofen, coumachlor and warfarin) were studied on a capillary column packed with 5 microm (3R,4S)-Whelk-O 1 chiral stationary phase. The influence of several experimental parameters (mobile phase pH, type of background electrolyte, acetonitrile ratio, temperature, applied voltage and ionic strength) on electroosmotic flow velocity, retention factor, selectivity factor, efficiency, resolution and effectiveness of chiral separation was evaluated. It was notable that the optimum resolution of the acidic enantiomers was achieved at pH 3.0 phosphate buffer, suggesting that capillary electrochromatography in the ion-suppressed mode can be applied for chiral separations of a range of acidic compounds.