Primordial non-Gaussianity from the 21 cm power spectrum during the epoch of reionization

Primordial non-Gaussianity is a crucial test of inflationary cosmology. We consider the impact of non-Gaussianity on the ionization power spectrum from 21 cm emission at the epoch of reionization. We focus on the power spectrum on large scales at redshifts of 7 to 8 and explore the expected constraint on the local non-Gaussianity parameter f(NL) for current and next-generation 21 cm experiments. We show that experiments such as SKA and MWA could measure f(NL) values of order 10. This can be improved by an order of magnitude with a fast-Fourier transform telescope like Omniscope.     

Synthesis, structure, and unexpected magnetic properties of La3Re2O10

The compound La(3)Re(2)O(10) has been synthesized by solid-state reaction and characterized by powder neutron diffraction, SQUID magnetometry, and heat capacity measurements. Its structure consists of isolated [Re(2)O(10)](9-) dimer units of two edge-shared ReO(6) octahedra, separated by La(3+) within the lattice. The Re-Re distance within the dimer units is 2.488 A, which is indicative of metal-metal bonding with a bond order of 1.5. The average oxidation state of the Re atom is +5.5, leaving one unpaired electron per dimer unit (S = 1/2). Although the closest interdimer distance is 5.561 A, the magnetic susceptibility data and heat capacity measurements indicate this compound exhibits both short- and long-range magnetic order at surprisingly high temperatures. The zero field cooled (ZFC) magnetic susceptibility data show two broad features at 55 and 105 K, indicating short-range order, and a sharper cusp at 18 K, which signifies long-range antiferromagnetic order. The heat capacity of La(3)Re(2)O(10) shows a lambda-type anomaly at 18 K, which is characteristic of long-range magnetic order. DFT calculations determined that the unpaired electron resides in a pi-bonding orbital and that the unpaired electron density is widely delocalized over the atoms within the dimer, with high values at the bridging oxygens. Extended Hückel spin dimer calculations suggest possible interaction pathways between these dimer units within the crystal lattice. Results from the calculations and fits to the susceptibility data indicate that the short-range magnetic ordering may consist of 1-D antiferromagnetic linear chains of coupled S = 1/2 dimers. The magnetic structure of the antiferromagnetic ground state could not be determined by unpolarized neutron powder diffraction.     

A detailed study of lid‐driven cavity flow at moderate Reynolds numbers using Incompressible SPH

Lid‐driven cavity flow at moderate Reynolds numbers is studied here, employing a mesh‐free method known as Smoothed Particle Hydrodynamics (SPH). In a detailed study of this benchmark, the incompressible SPH approach is applied together with a particle shifting algorithm. Additionally, a new treatment for no‐slip boundary conditions is developed and tested. The use of the aforementioned numerical treatment for solid walls leads to significant improvements in the results with respect to other SPH simulations carried out with similar spatial resolution. However, the effect of spatial resolution is not considered in the present study as the number of particles used in each case was kept constant, approximately reproducing the same resolutions employed in reference studies available in the literature as well. Altogether, the detailed comparisons of field variables at discreet points demonstrate the accuracy and robustness of the new SPH method. Copyright © 2014 John Wiley & Sons, Ltd.     

Sulfated and sulfonated polysaccharide as chiral stationary phases for capillary electrochromatography and capillary electrochromatography–mass spectrometry

The applications of polysaccharide phenyl carbamate derivatives as chiral stationary phases (CSPs) for capillary electrochromatography (CEC) are often hindered by longer retention times, especially using a normal-phase (NP) eluent due to very low electroosmotic flow (EOF). Therefore, in this study, we propose an approach for the aforementioned problems by introducing two new types of negatively charged sulfate and sulfonated groups for polysaccharide CSPs. These CSPs were utilized to pack CEC columns for enantioseparation with a NP eluent. Compared to conventional cellulose tris(3,5-dimethylphenyl carbamate) or CDMPC CSPs, the sulfated CDMPC CSP (sulfur content 4.25%, w/w) shortened the analysis time up to 50% but with a significant loss of enantiomeric resolution (∼60%). On the other hand, the sulfonated CDMPC CSP (sulfur content 1.76%, w/w) not only provided fast throughput but also maintained excellent resolving power. In addition, its synthesis is much more straightforward than the sulfated one. Furthermore, we studied several stationary phase parameters (CSP loading and silica gel pore size) and mobile phase parameters (including type of mobile phase and its composition) to evaluate the throughput and enantioselectivity. Using the optimized conditions, a chiral pool containing 66 analytes was screened to evaluate the enantioselectivity under three different mobile phase modes (i.e., NP, polar organic phase (POP) and reversed-phase (RP) eluents). Among these mobile phase modes, the RP mode showed the highest success rate, whereas some degree of complementary enantioselectivity was observed with NP and POP. Finally, the feasibility of applying this CSP for CEC–MS enantioseparation using internal tapered column was evaluated with NP, POP and RP eluents. In particular, the NP-CEC–MS provided significantly enhanced sensitivity when methanol was replaced with isopropanol in the sheath liquid. Using aminoglutethimide as model chiral analyte, all three modes of CEC–MS demonstrated excellent durability as well as excellent reproducibility of retention time and enantioselectivity.     

Design and development of several polymeric metal–organic frameworks,spectral characterization,and their antimicrobial activity

Coordination polymers were obtained by the reaction of metal acetates, M(CH₃COO)₂·xH₂O {where M = Mn(II), Co(II), Ni(II) and Cu(II)} with AFP ligand (AFP = 5,5'-(piperazine-1,4-diylbis(methylene))bis(2-aminobenzoic acid). The AFP ligand was prepared by the one-pot, two-step reaction of formaldehyde, 2-aminobenzoic acid, and piperazine. Structural and spectroscopic properties have been studied by elemental, spectral (FT-IR, ¹H NMR, ¹³C NMR, and UV–vis), and thermogravimetric analysis. UV–vis spectra and magnetic moment values indicate that Mn(II), Co(II), and Ni(II) polymer–metal complexes are octahedral, while Cu(II) and Zn(II) polymer–metal complexes are distorted octahedral and tetrahedral, respectively. The analytical data confirmed that the coordination polymers of Mn(II), Co(II), Ni(II), and Cu(II) are coordinated with two water molecules, which are further supported by infrared spectra and thermogravimetric analysis data. The prepared polymer–metal complexes showed good antibacterial activities against all tested microorganisms; however, the AFP ligand was also found to be effective, but relatively less than their polymer–metal complexes. Along with antibacterial activity, all the polymer–metal complexes exhibit significant antifungal activity against most of the tested fungal strains. The results of antimicrobial activity reveals that the AFP–Cu(II) showed the highest antibacterial and antifungal activity than other polymer–metal complexes.     

Signalling probe displacement electrochemical aptasensor for malignant cell surface nucleolin as a breast cancer biomarker based on gold nanoparticle decorated hydroxyapatite nanorods and silver nanoparticle labels

Nucleolin is a multifunctional protein that is markedly overexpressed on the surface of most cancer cells. By taking advantage of the high affinity and specificity of the AS1411 aptamer for nucleolin, a signalling probe displacement electrochemical aptasensor was developed. The thiolated AS1411 aptamer was conjugated to hydroxyapatite nanorods (HApNRs) decorated with gold nanoparticles (AuNPs). To further increase the electrical conductivity of the interface, the ionic liquid 1-ethyl-3-methylimidazolium alanine with its high ion conductivity was placed on the electrode surface. Then, the aptamer was immobilized on the modified electrode and conjugated to signalling c-DNA tagged with AgNPs (c-DNA@AgNPs). In the presence of the MCF7 target cells, the signalling probe is displaced and released from the electrode surface. This leads to a decrease in the current that is proportional to the concentration of cancer cells in the range from 10 to 10⁶ cells mL^?1, with a detection limit as low as 8?±?2 cells mL^?1 (n?=?3) (based as 3σ/m, where σ is the standard deviation of the blank and m is the slope of the calibration plot). This method presents a promising tool for highly sensitive and selective detection of surface nucleolin on MCF7 cancer cells.

Open image in new window

Graphical abstract HApNR-AuNP-AS1411 aptamer nanocomposite as an electrochemical sensing interface was immobilized on the gold electrode surface and conjugated to signaling c-DNA tagged with AgNPs for determination of surface nucleolin on MCF7 cancer cells.

     

Polymeric alkenoxy amino acid surfactants: IV. effects of hydrophobic chain length and degree of polymerization of molecular micelles on chiral separation of beta-blockers

Four alkenoxy leucine-based surfactants with C8-C11 chains containing a terminal double bond, and one C11 chain surfactant with a terminal triple bond are synthesized and characterized in monomeric and polymeric forms. These polymeric pseudophases are then utilized to study the influence of chain length and DP for the enantioseparations of seven beta-blockers in MEKC. Variations in chain length and concentration of polymeric surfactants showed significant effects on the chiral resolution (Rs) and efficiency (N). A relatively large elution range combined with the highest polarity and aggregation number (A) but the lowest retention time, partial specific volume, and optical rotation generated with C8-polymeric surfactant results in simultaneous enantioseparation of all seven beta-blockers with higher N and R(s). In particular, highly hydrophobic beta-blockers are better resolved with shorter hydrocarbon chain even at higher surfactant concentration, which is unachievable with longer chain surfactant. On the other hand, polymer derived from C11-triple bond provided smaller A value compared to C11-double bond surfactant. However, chiral Rs of hydrophobic beta-blockers are still achievable with the C11-triple bond surfactant with enhanced N and shorter analysis time. In addition, effect of polymerization concentration is evaluated by polymerizing all five surfactants at five times their respective CMCs and 100 mM equivalent monomer concentrations. Polymerization of shorter chain (C8 and C9) double-bonded surfactants at five times their respective CMCs results in higher A values with better chiral Rs and N compared to the same two surfactants polymerized at 100 mM.     

Polymeric sulfated surfactants with varied hydrocarbon tail: II. Chemical selectivity in micellar electrokinetic chromatography using linear solvation energy relationships study

The effect of hydrocarbon chain length on chemical selectivity in micellar electrokinetic chromatography (MEKC) was investigated using polymeric sulfated surfactants: poly-(sodium 7-octenyl sulfate), poly(sodium 8-nonenyl sulfate), poly(sodium 9-decenyl sulfate), and poly(sodium 10-undecenyl sulfate). Linear solvation energy relationships (LSERs) and free energy of transfer studies were conducted to predict the selectivity differences between the four polymeric surfactants. The overall nature of the solute/ polymeric micelle interactions was found to be different despite the fact that all polymeric surfactants have the same head group. The polar character and acidic strength of the polymeric surfactant are found to decrease as the hydrocarbon chain length of the surfactant is increased. On the other hand, the polarizability of the polymeric sulfated surfactants increases (upon interacting with solute lone-pair electrons) with increasing hydrocarbon chain length. The LSER results show that the solute size and hydrogen bond accepting ability play the key roles in MEKC retention.