Polymeric alkenoxy amino acid surfactants: II. Chiral separations of beta-blockers with multiple stereogenic centers

Two amino acid-based (leucine and isoleucine) alkenoxy micelle polymers were employed in this study for the separation of multichiral center-bearing beta-blockers, nadolol and labetalol. These polymers include polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL). Detailed synthesis and characterization were reported in our previous paper [26]. It was found that poly-L-SUCIL gives better chiral separation than poly-L-SUCL for both nadolol and labetalol isomers. The use of 50-100 mM poly-L-SUCIL as a single chiral selector provided separation of four and three isomers of labetalol and nadolol, respectively. Further optimization in separation of both enantiomeric pairs of nadolol and labetalol was achieved by evaluation of type and concentration of organic solvents, capillary temperature as well type and concentration of cyclodextrins. A synergistic approach, using a combination of poly-L-SUCIL and sulfated beta-CD (S-beta-CD) was evaluated and it showed dramatic separation for enantiomeric pairs of nadolol. On the other hand for labetalol enantiomers, separation was slightly decreased or remain unaffected using the dual chiral selector system. Finally, simultaneous separation of both nadolol and labetalol enantiomers was achieved in a single run using 25 mM poly-L-SUCIL and 5% w/v of S-beta-CD in less then 35 min highlighting the importance of high-throughput chiral analysis.     

A redox-reconfigurable, ambidextrous asymmetric catalyst

A redox-reconfigurable catalyst derived from L-methionine and incorporating catalytic urea groups has been synthesized. This copper complex catalyzes the enantioselective addition of diethyl malonate to trans-β-nitrostyrene. Either enantiomer of the product can be predetermined by selection of the oxidation state of the copper ion. Enantiomeric excesses of up to 72% (S) and 70% (R) were obtained in acetonitrile. The ability of the catalyst to invert enantiomeric preference was reproduced with several different solvents and bases. Facile interconversion between the Cu(2+) and Cu(+) redox states allowed easy access to both active helical forms of the complex and, therefore, dial-in enantioselectivity.     

Development of a fritless packed column for capillary electrochromatography-mass spectrometry

A novel procedure was developed for the fabrication of a fritless packed column for the coupling of capillary electrochromatography (CEC) to mass spectrometry (MS). The process involved the formation of internal tapers on two separate columns. Once the internal tapers are formed and the columns are packed, the untapered ends of each column were joined together by a commercially available connector. Several advantages of the fritless columns are described. First, the design used here eventually eliminates the need for any frits thus reducing the possibility of bubble formation seen with fritted packed columns. In addition, this is the first report in which the internal tapers are formed at both the inlet and outlet column ends making the fritless CEC-MS column more robust compared to only one report with externally tapered counterparts. Second, a comparison of internally tapered single frit packed CEC-MS (previously developed in our laboratory) column versus fritless CEC-MS column reported here shows that the latter provides better efficiency, suggesting no dead volume with equally good sensitivity and chiral resolution of (±)-aminoglutethimide. The fritless column procedure is universal and was used to prepare a series of columns with a variety of commercially available packing material (mixed mode strong cation exchange, SCX; mixed mode strong anion exchange, SAX; C-18) for the separation and MS detection of short chain non-chromophoric polar amines, long chain nonchromophic anionic surfactant as well as oligomers of non-chromophoric non-ionic surfactants, respectively. The fritless columns showed good intra-day repeatability and inter-day reproducibility of retention times, chiral and achiral resolutions and peak areas. Very satisfactory column-to-column and operator-to-operator reproducibility was demonstrated.     

Multivariate approach for the enantioselective analysis in MEKC‐MS: II. Optimization of 1,1′‐binaphthyl‐2,2′‐diamine in positive ion mode

Enantiomeric separation and detection of 1,1′‐binaphthyl‐2,2′‐diamine (BNA) has been successfully optimized by MEKC‐ESI‐MS using a polymeric surfactant polysodium N‐undecenoxycarbonyl‐L‐leucinate (poly‐L‐SUCL) as a pseudostationary phase. In the first step, MEKC conditions were optimized by a five‐factor three‐level central composite design (CCD) of experiment. All five MEKC factors (buffer pH, percentage of ACN in the running buffer, concentration of surfactant, concentration of ammonium acetate (NH₄OAc), and voltage) were found significant to the responses (measured as the chiral resolution and analysis time). The interactions between MEKC factors were further evaluated using a quadratic model equation which allowed the generation of 3‐D response surface image to reach the optimum conditions. To obtain the best S/N, sheath liquid composition and spray chamber parameters were successfully optimized using the same strategy. Baseline enantiomeric resolution in less than 20 min and optimum MS signal of BNA enantiomers (S/N = 45 at 0.4 mg/mL) were ultimately achieved at the optimized conditions. The adequacy of the model was validated by experimental runs at the optimal predicted conditions. The predicted results were found to be in good agreement with the experimental data.     

Theoretical Model for Surface Forces between Cytosine and CNT(6,6-6) Nanotube: Geometry Optimization,Molecular Structure,Intermolecular Hydrogen Bond,Spectroscopic (NMR,UV/Vis,Excited State), FMO,MEP, and HOMO–LUMO Investigations

Russian Journal of Physical Chemistry A - In the present work, the adsorption of the molecule cytosine on carbon nanotube [CNT] (6,6-6) was investigated for the first time using density functional...     

Chiral separations in microemulsion electrokinetic chromatography. Use of micelle polymers and microemulsion polymers

In this study, microemulsions of the chiral surfactant polysodium N-undecenoyl-D-valinate (poly-D-SUV) was utilized for enantiomeric separation by investigating two approaches using polymeric chiral surfactant in microemulsion electrokinetic chromatography (MEEKC). In the first approach, poly-D-SUV was used as an emulsifier surfactant along with 1-butanol and n-heptane. Enantioseparation of anionic or partially anionic binaphthyl derivatives, anionic barbiturates, and cationic paveroline derivatives were achieved by varying the mass fraction of 1-butanol, n-heptane and poly-D-SUV. For anionic or partially anionic analytes, relatively lower mass fractions of n-heptane, and poly-D-SUV were found to give optimum chiral separations as compared to that for cationic solutes. In the second approach, the chiral microemulsion polymer was prepared by polymerizing mixtures of 3.50% (w/w) of sodium N-undecenoyl-D-valinate (D-SUV) and 0.82% (w/w) of n-heptane (core phase) at varying concentration of 1-butanol. After polymerization, the n-heptane and 1-butanol were removed to yield solvent free microemulsion polymers (MPs) which were then utilized for the separation of anionic binaphthyl derivatives and anionic barbiturates. When MPs of D-SUV were utilized for chiral separation, 1.00% (w/w) 1-butanol and 3.50% (w/w) 1-butanol was optimum for enantioseparation of (+/-)-BNP and (+/-)-BOH, respectively. On the other hand, for anionic (+/-)-barbiturates very low concentration of butanol (0.25%, w/w) provided optimum resolution. Compared with micellar electrokinetic chromatography (MEKC), the use of micelle polymers or microemulsion polymers in MEEKC showed dramatic enhancement for resolution of (+/-)-BNP, while this enhancement was less dramatic for other binaphthyls [(+/-)-BOH, (+/-)-BNA] as well as for (+/-)-barbiturates and (+/-)-paveroline derivatives. However, higher separation efficiency of the enantiomers was always observed with MEEKC than in MEKC.     

Enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives by Fe3O4@PS‐arginine as an efficient chiral magnetic nanocatalyst

A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe₃O₄ magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe₃O₄@propylsilan‐arginine (Fe₃O₄@PS‐Arg). After the structural confirmation of Fe₃O₄@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe₃O₄@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds.