Electrical and optical characteristics of porous silicon impregnated with LaF3 by a novel chemical bath technique

The structural, electrical and optical characteristics of porous silicon (PS) due to the impregnation of LaF₃ into PS by a novel chemical-bath deposition (CBD) technique have been investigated in this article. Without removing the PS from the anodization chamber the impregnation with LaF₃ has been done by reacting LaCl₃ with HF in the same chamber at room temperature. The impregnation of LaF₃ was confirmed by the SEM on the cross-section of the LaF₃/PS/Si system and EDX. The modification of PS surface by LaF₃ had direct influence on the electrical and optical properties of PS. Electrical properties of Ag/LaF₃/PS/p-Si/Ag structures were studied through the current-voltage (I-V) and capacitance-voltage (C-V) characteristics. Formation of metal-insulator-semiconductor (MIS) diode was evident whose forward current increased with annealing. A diode factor of about 2.4 has been obtained for the annealed heterostructure indicating a high density of trap states. The C⁻²-V curves of all samples showed negative flat band voltage of around −2 V confirming a large number of fixed positive charges in the LaF₃. The photoluminescence (PL) intensity of the LaF₃-impregnated PS showed aging for the as-deposited samples, but when annealed PS structure recovered the PL intensity. Experimental results show that the optimized chemical bath passivation process for the LaF₃ on porous silicon could enable the porous silicon to be an important material for photonic application.     

Phase proportioning in CuAlBe shape memory alloys during thermomechanical loadings using electric resistance variation

The microstructure of shape memory alloys changes with the thermomechanical history of the material. During thermomechanical loading, austenite, thermally-induced martensite or stress-induced martensite can be simultaneously present in the material. In applications integrating SMA parts, utilization conditions seriously affect the microstructure and can generate macroscopic strain or stress. Consequently, during thermomechanical loadings, it is important to be able to proportion the different phases and consequently to understand the kinetic transformation. This is very useful in the development of constitutive equations. This study shows, by a series of tests, that the proposed experimental method, based on the measurement of the variation of electric resistance of CuAlBe wires, permits to determine the volume fraction of the different phases present in the material (i.e., austenite, stress-induced martensite and thermally-induced martensite). The proposed method is applied to the most common thermomechanical behavior met in engineering applications of shape memory alloys: pseudoelasticity, pseudoplasticity, recovery-stress and stress-assisted two-way shape memory effect. The proportioning method based on a mixture law integrating the resistivity of pure phases present in the SMA is first performed on different two-phase mixture cases and then applied to a three phase mixture case.     

Enhanced Directed Random Walk for the Identification of Breast Cancer Prognostic Markers from Multiclass Expression Data

Artificial intelligence in healthcare can potentially identify the probability of contracting a particular disease more accurately. There are five common molecular subtypes of breast cancer: luminal A, luminal B, basal, ERBB2, and normal-like. Previous investigations showed that pathway-based microarray analysis could help in the identification of prognostic markers from gene expressions. For example, directed random walk (DRW) can infer a greater reproducibility power of the pathway activity between two classes of samples with a higher classification accuracy. However, most of the existing methods (including DRW) ignored the characteristics of different cancer subtypes and considered all of the pathways to contribute equally to the analysis. Therefore, an enhanced DRW (eDRW+) is proposed to identify breast cancer prognostic markers from multiclass expression data. An improved weight strategy using one-way ANOVA (F-test) and pathway selection based on the greatest reproducibility power is proposed in eDRW+. The experimental results show that the eDRW+ exceeds other methods in terms of AUC. Besides this, the eDRW+ identifies 294 gene markers and 45 pathway markers from the breast cancer datasets with better AUC. Therefore, the prognostic markers (pathway markers and gene markers) can identify drug targets and look for cancer subtypes with clinically distinct outcomes.     

Modified lattice Boltzmann solution for non-isothermal rarefied gas flow through microchannel utilizing BSR and second-order implicit schemes

Journal of Thermal Analysis and Calorimetry - Thermal microscale gas flow was simulated into a coplanar microchannel was simulated at a broad range of Knudsen numbers. Attempts were made to improve...     

Synthesis and Characterization of Ligand-Linked Pt Nanoparticles: Tunable,Three-Dimensional,Porous Networks for Catalytic Hydrogen Sensing

Porous networks of Pt nanoparticles interlinked by bifunctional organic ligands have shown high potential as catalysts in micro-machined hydrogen gas sensors. By varying the ligand among p-phenylenediamine, benzidine, 4,4‘‘-diamino-p-terphenyl, 1,5-diaminonaphthalene, and trans-1,4-diaminocyclohexane, new variants of such networks were synthesized. Inter-particle distances within the networks, determined via transmission electron microscopy tomography, varied from 0.8 to 1.4 nm in accordance with the nominal length of the respective ligand. While stable structures with intact and coordinatively bonded diamines were formed with all ligands, aromatic diamines showed superior thermal stability. The networks exhibited mesoporous structures depending on ligand and synthesis strategy and performed well as catalysts in hydrogen gas microsensors. They demonstrate the possibility of deliberately tuning micro- and mesoporosity and thereby transport properties and steric demands by choice of the right ligand also for other applications in heterogeneous catalysis.     

Ruthenium/dendrimer complex immobilized on silica-functionalized magnetite nanoparticles catalyzed oxidation of stilbenes to benzil derivatives at room temperature

A new ruthenium/dendrimer complex stabilized on the surface of silica-functionalized nano-magnetite was fabricated and well characterized. The nano-catalyst showed good activity in the synthesis of benzil derivatives via the oxidation of stilbenes with high turnover frequency (TOF) at room temperature. Moreover, the catalyst could also be reused up to fifteen times without any loss of its activity.     

Effects of interaural decorrelation and acoustic spectrum on detecting the motion of an auditory target

The ability to detect the motion of an auditory target based on dynamic changes in interaural time differences was measured as a function of interaural correlation and acoustic spectrum in a single-interval forced-choice design. Three subjects listened to headphone-presented noise containing a dynamic linear change in interaural delay (500 μs/s). The stimulus spectrum was broadband (0.1 to 10 kHz), highpass above 1.5 kHz, or lowpass below 1.2 kHz, and interaural correlation ranged from 0.1 to 1.0. Subject performance was nearly identical for the broadband and lowpass conditions, with near perfect detection for interaural correlations of 0.5 or greater, and above threshold (d′ > 1) detection for a correlation of 0.3. Performance was near random when the correlation was 0.1. In the highpass condition, performance rapidly deteriorated from substantially above threshold (d′ > 2) to random level as interaural correlation was reduced from 1.0 to 0.7. This rapid decline in performance at high frequencies may be explained in terms of interaural envelope decorrelation. The text was submitted by the authors in English.     

Lateralization thresholds obtained under conditions in which the precedence effect is assumed to operate

Interaural differences of time (IDT) thresholds were measured with 600-microseconds transients. The initial experiment was a successful replication of previous experiments that have obtained the precedence effect in lateralization paradigms (e.g., Yost and Soderquist, 1984). When a dichotic click followed a diotic click with an interclick interval (ICI) less than 1 ms or larger than 5 ms, IDT thresholds were generally less than 40 microseconds. For ICIs between 1 to 5 ms, IDT thresholds increased to approximately 220 microseconds. Poorest performance was observed for ICIs of 1.75 to 2.35 ms. During the course of conducting a series of planned experiments on this effect, a substantial drop in IDT thresholds was observed across the ICIs of maximum interest (1 to 5 ms). The precedence effect, which we had replicated in our initial experiment, essentially "disappeared" when the subjects were given sufficient practice on the lateralization task. A number of conditions were explored in an unsuccessful attempt to recover the precedence effect in these experienced subjects. The implications of these results are discussed.     

Nanostructured polyaniline sensors

The conjugated polymer polyaniline is a promising material for sensors, since its conductivity is highly sensitive to chemical vapors. Nanofibers of polyaniline are found to have superior performance relative to conventional materials due to their much greater exposed surface area. A template-free chemical synthesis is described that produces uniform polyaniline nanofibers with diameters below 100 nm. The interfacial polymerization can be readily scaled to make gram quantities. Resistive-type sensors made from undoped or doped polyaniline nanofibers outperform conventional polyaniline on exposure to acid or base vapors, respectively. The nanofibers show essentially no thickness dependence to their sensitivity.     

Preparation of Silica Supported Tin Chloride: As a Recyclable Catalyst for the Silylation of Hydroxyl Groups with HMDS

Silica‐supported tin chloride [SiO₂‐Sn(Cl)_4‐n] has been prepared by mixing tin chloride with activated silica gel in toluene under refluxing conditions for one day. A range of primary, secondary, and tertiary alcohols as well as phenolic hydroxyl groups were converted into their corresponding trimethylsilyl ethers with hexamethyldisilazane in the presence of catalytic amounts of silica‐supported tin chloride at room temperature. An excellent chemoselective silylation of hydroxyl groups in the presence of other functional groups was also observed. This catalyst could be recycled and reused fifteen times without loss of efficiency.