Trapping tetramethoxyzincate and -cobaltate(II) between Mo24+ units

Two compounds of a new type, [Mo(2)](CH(3)O)(2)M(CH(3)O)(2)[Mo(2)] where [Mo(2)] is an abbreviation for Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3) and M = Zn (1) and Co (2), are reported. Discrete [M(OR)(4)](2-) ions, either as such or in the mu(2),eta(4) role, have not heretofore been described. In these compounds they have distorted tetrahedral structures and bridge two [Mo(2)] groups in much the same way as did SO(4)(2-), MoO(4)(2-), and WO(4)(2-) ions in other recently reported compounds (Cotton, F. A.; Donahue, J. P.; Murillo, C. A. Inorg. Chem. 2001, 40, 2229). The (1)H NMR spectrum of 1 and the visible spectrum and magnetic properties of 2 are consistent with these structures. The M(OCH(3))(4) bridges are moderately effective in coupling the two [Mo(2)] redox centers. Compounds 1 and 2 may also be viewed as having Zn(II) and Co(II) centers tetrahedrally coordinated by the bidentate ligand [Mo(2)[(p-MeOC(6)H(4))NCHN(p-MeOC(6)H(4))](3)(OMe)(2)](-). From that point of view they may be compared with Zn(DPM)(2) and Co(DPM)(2) (3), where DPM is the anion of dipivaloylmethane. For purposes of comparison, 3 has been fully characterized structurally, spectroscopically, and magnetically. Close analogies between 2 and 3 are shown to exist.     

Hydroxylamine derivative in the Purex Process

N,Ndiethylhydroxylamine (DEHAN) can rapidly reduce Pu(IV) and Np(VI) extractable with trinbutyl phosphate (TBP) to Pu(III) and Np(V) unextractable with TBP in nitric acid solution. In order to apply DEHAN in the purification cycle step of U (noted as contactor 2D) of the secondcycle of the Purex Process to separate Np and Pu from U, the reduction of Np(VI) and the stability of Np(V) with DEHAN and the singlestage reduction extraction and backextraction of Np(VI) have been studied according to the experimental conditions of contactor 2D. The results show that more than 99% of Np(VI) can entirely be reduced to Np(V) with DEHAN within a few minutes either in aqueous or in organic phase containing uranium and without containing uranium, and more than 99% of Np(VI) can be backextracted from the organic to the aqueous phase with DEHAN as a reductant. More than 99% of Np(V) exists in nitric acid solution at least for 8 hours in presence of 0.01 mol/l DEHAN. These results are of benefit to the cascade extractionseparation of U/Np in contactor 2D in order to decontaminate Np from U.     

Theoretical design of singlet localized σ-diradicals: C(MH2)3C (M = Si, Ge, Sn, Pb)

Some localized singlet 1,3-σ-diradicals, C(MH₂)₃C, (M = Si, Ge, Sn, Pb) were theoretically designed by the orbital phase theory and density functional theory calculations. The bicyclic carbon-centered singlet diradicals were more stable than the lowest triplets. Except for M = C, σ-bonded isomers were not located for 1,3-σ-diradicals. 1,4-σ-diradicals, C(M₂H₄)₃C, also had singlet ground states, but they were less stable than σ-bonded isomers.     

Synthesis,crystal structure and luminescent property of a novel H<Subscript>2</Subscript>O-bridged cobalt(II) polymer with one-dimensional chain structure

The coordination compound [Co(C₁₀H₇COO)₂(H₂O)₃]_2n · 4nH₂O was prepared by the reaction of 1-naphthoic acid and cobalt(II) acetate tetrahydrate in basic solution, and was fully characterized by X-ray diffraction, element analysis, FTIR, TG-DTA and luminescent spectra. In the crystal the six-coordinated Co(II) centers are linked into one-dimensional zigzag chains by water molecules, which are further assembled into a two-dimensional network through weak inter-chain C–H···π interactions. The solid complex exhibits favorable fluorescent properties similar to those of free ligand at room temperature, which can be assigned to the intraligand electronic transfer.     

Phosphine-mediated reductive condensation of gamma-acyloxy butynoates: a diversity oriented strategy for the construction of substituted furans

Exposure of gamma-acyloxy butynoates to stoichiometric quantities of triphenylphosphine results in reductive condensation to afford substituted furans, by way of allenic ester intermediates. As gamma-acyloxy butynoates are readily obtained through condensation of ethyl propiolate with aldehydes followed by acylation, this method represents a powerful and mechanistically novel protocol for the convergent three-component construction of substituted furans.     

Error bounds for the overlap of approximate wave functions

Variational upper and lower bounds for the overlap between an approximate and the true wave function are proposed, and it is shown that the error bounds introduced recently by Gordon are special cases of the variational formulas.     

Studies on the properties of ionic liquid EMIInCl4

This paper reports that an ionic liquid (IL) has been prepared by directly mixing InCl₃ and 1-methyl-3-ethylimidazolium chloride (EMIC) with molar ratio 1/1 under dry argon atmosphere. The densities, and surface tension of the pure IL were determined at temperature range of 293.15 to 343.15 ± 0.1 K. The volumetric properties and the properties of surface for ionic liquid based on group III were discussed by Glasser's theory and Yang's interstice model.     

Chitosan-mediated and spatially selective electrodeposition of nanoscale particles

Nanoscale particles offer a variety of interesting properties, and there is growing interest in their assembly into higher ordered structures. We report that the pH-responsive aminopolysaccharide chitosan can mediate the electrodeposition of model nanoparticles. Chitosan is known to electrodeposit at the cathode surface in response to a high localized pH. To demonstrate that chitosan can mediate nanoparticle deposition, we suspended fluorescently labeled latex nanoparticles (100 nm diameter spheres) in a chitosan solution (1%) and performed electrodeposition (0.05 mA/cm2 for several minutes). Results demonstrate that chitosan is required for nanoparticle electrodeposition; chitosan confers spatial selectivity to electrodeposition; and nanoparticles distribute throughout the electrodeposited chitosan film. Additionally, we observed that the deposited films reversibly swell upon rehydration. This work indicates that chitosan provides a simple means to assemble nanoparticles at addressable locations and provides further evidence that stimuli-responsive biological materials may facilitate fabrication at the microscale.     

A Substituted Tetraazaporphyrinogen as an Electroactive Component for a Polymeric Membrane Anion-Selective Electrode

A novel anion-selective electrode has been prepared by usingtetraazaporphyrinogen as the electroactive component and o-nitrophenyloctylether as the plasticizer. The electrode exhibits almost Nernstian responsecharacteristics for Pic^-, ReO ₄ ^- ,SCN^-, ClO ₄ ^- and TPB^-. The linearresponse ranges towards the above-mentioned anions are 10^-6 10^-2, 10^-5 10^-2,10^-5 10^-2, 10^-5 10^-1, and 10^-5 10^-2mol/Land the corresponding slopes are -56.8, -57.1, -56.3, -56.1, and -59.9mV/decade with correlation coefficients of -0.99978, -0.99987, -0.99999,-0.99998, and -0.99998, respectively. The electrode shows an anti-Hofmeisterselectivity sequence: Pic^- > SCN^- >ReO ₄ ^- > ClO ₄ ^- > I^- >Br^- > BF ₄ ^- > Sal^->NO ₃ ^- > Cl^-. The unusual responsemechanism of the novel anion-selective electrode was investigated byexperimental observations and calculation with the MNDO method. Theelectrode was used as a TPB^- and a Pic^-sensitiveelectrode, respectively, and applied to the assay of levamisolehydrochloride tablets by potentiometric titration and Gran's methods. Theresults obtained are in excellent agreement with that determined by thestandard pharmacopoeia method based on nonaqueous titration.     

Cyclocopolymerization of dicyclic dienes and maleic anhydride to fused ring systems

The cyclocopolymerization of maleic anhydride and four 1,5- and 1,6-dienes (bicyclopentene, bicyclohexene, dicyclopentenyl ether, and dicyclohexenyl ether) and one tetraene (quartercyclopentene) is described. Soluble, low molecular weight copolymers were obtained from all five compounds. Their compositions approach 2:1 copolymer ratios. Fused ring structures are proposed as the main repeating units. Among the compounds listed, bicyclopentene copolymerized most easily and gave good conversions for monomer ratios of 2:1. Quartercyclopentene and dicyclopentyl ether, the other five-membered ring compounds, also polymerized to good-to-fair yields. However, a monomer ratio of about 4:1 was required to obtain conversions comparable to a 2:1 maleic anhydride—bicyclopentene polymerization. The six-membered systems, bicyclopentene and dicyclopentenyl ether, gave consistently low conversions, even with a 4:1 monomer ratio. The influence of the initiator system, initiator concentration, and reaction medium was studied on copolymerizations of bicyclopentene. Best results were obtained in acetic anhydride with azobisisobutyronitrile as the initiator.