Synthesis, structure and solution properties of the novel polyampholytes based on cellulose

A novel cellulose-based polyampholyte derivative, carboxylethyl quaternized cellulose (CEQC), was homogeneously synthesized by introducing positively charged quaternary ammonium groups and negatively charged carboxyl groups to the backbone of cellulose. The structure and dilute solution properties of CEQCs were characterized with elemental analysis, FTIR, NMR, viscometer, light scattering and zeta-potential measurement. The nitrogen content and total degree of substituent of acylamino and carboxyl groups increased with an increase of the molar ratio of acrylamide to the anhydroglucose unit of quaternized cellulose (QC). The salt-resistance of CEQC was improved remarkably by introducing opposite charged carboxyl to the QC chains. The intrinsic viscosity of the prepared polyampholytes was found to be very sensitive to the pH of the solutions. CEQC-1, the sample with relative low content of carboxyl groups, behaved as a classical cationic polyelectrolyte. However, CEQC-2 and CEQC-3, the samples with higher content of carboxyl groups, displayed typical polyampholyte behavior, and the isoelectric points (IEP) were determined to be 5.0 and 3.8 respectively. This work provided a facile method for the synthesis of novel cellulose-based polyampholytes with different IEP.     

Urinary metabonomic study using a CUMS rat model of depression

Chronic unpredictable mild stress (CUMS) is a well‐validated model of depression. In this study, a urinary metabonomics method based on the NMR spectrometry was used to study the metabolic perturbation in CUMS‐induced rat depression model. With pattern recognition analysis, a clear separation of CUMS rats and healthy controls was achieved, and nine endogenous metabolites contributing to the separation were identified. CUMS‐treated rats were characterized by the increase of glycine, pyruvate, glutamine, and asparagines, as well as the decrease of 2‐oxoglutarate, dimethylglycine, citrate, succinate, and acetate. The urinary biochemical changes related to the metabolic disturbance in CUMS induced depression, and the possible correlations with live qi stagnation in traditional Chinese medicine are discussed. The work shows that CUMS is a reliable model for studying depression, and the noninvasive urinary metabolomic method is a valuable tool to investigate the biochemical pertubations in depression as an early diagnostic means. Copyright © 2012 John Wiley & Sons, Ltd.     

The effect of phosphate buffer solutions on uniconazole complexation with hydroxypropyl-β-cyclodextrin and methyl-β-cyclodextrin

The inclusion complexes of uniconazole [(E)-1-(4-chlorophenyl)-4,4-dimethyl-2-(1,2,4-triazol-lyl)-1-penten-3-ol, UCZ] with two cyclodextrin derivatives, hydroxypropyl-β-cyclodextrin (HP-β-CD) and methylated-β-cyclodextrin (Me-β-CD), were prepared and characterized by ¹H NMR and FT-IR. The phase solubility of UCZ and HP-β-CD, UCZ and Me-β-CD, which displays the ability of CDs complexation and solubilization, was studied in aqueous solutions and phosphate buffer solutions (PBS) with different property pH values (6.2, 7.2, 8.0). The solubility results indicated that the pH of PBS showed more enhancement on the interaction of HP-β-CD and UCZ than Me-β-CD with the increasing pH value, and the optimal pH value for complexation of UCZ and HP-β-CD, UCZ and Me-β-CD was at 8.0 and at 7.2, respectively. These were also determined by UCZ release behavior and dissolution studies of the complexes in solid state.     

All-solution-processed PIN architecture for ultra-sensitive and ultra-flexible organic thin film photodetectors

An ideal organic thin film photodetectors (OTFPs) should adopt a hierarchical, multilayer p-type/blend-type/n-type (PIN) structure, with each layer having a specific purpose which could greatly improve the exciton dissociation while guarantee efficient charge transport. However, for the traditional layer-by-layer solution fabrication procedure, the solvent used can induce organic material mixing and molecular disordering between each layer. Hence, such architecture for OTFPs can now only be formed via thermal evaporation. In this paper, a contact-film-transfer method is demonstrated to all-solution processing organic PIN OTFPs on flexible substrates. The fabricated PIN OTFPs exhibit high photoresponse and high stability under continuous mechanical bending. Hence, the method we described here should represent an important step in the development of OTFPs in the future.     

Electrochemical properties of high-energy-density Li[Ni0.5Co0.2Mn0.3]O2 cathode at full-cell level

Russian Journal of Applied Chemistry - Layered lithium transition metal oxide LiNi0.5Co0.2Mn0.3O2 cathode materials were successfully obtained through a simple carbonate co-precipitation method....     

Tuner design and RF test of a four-rod RFQ

A mini-vane four-rod radio frequency quadruple (RFQ) accelerator has been built for neutron imaging. The RFQ will operate at 201.5 MHz, and its length is 2.7 m. The original electric field distribution along the electrodes is not flat. The resonant frequency needs to be tuned to the operating value. And the frequency needs to be compensated for temperature change during high power RF test and beam test. As tuning such a RFQ is difficult, plate tuners and stick tuners are designed. This paper will present the tuners design, the tuning procedure, and the RF properties of the RFQ.

     

Determination of protoapigenone in rat plasma by high‐performance liquid chromatography with UV detection and its application in pharmacokinetic studies

A simple and sensitive HPLC method using UV detection was developed to determine the concentration of protoapigenone in rat plasma. Chromatographic separation was conducted on a C₁₈ column with a mobile phase consisting of an acetonitrile–methanol–aqueous phase (containing 0.2% acetic acid, pH 3.0) system at a flow rate of 1.0 mL/min. The UV detector was set at 248 nm. The calibration curve was linear over the range of 0.031–10.0 µg/mL. The lower limit of quantification was 31 ng/mL. The recoveries for plasma samples ranged from 70.3 to 82.5%. The intra‐ and inter‐day accuracy and precision fulfilled the international standards. This method was successfully applied to a pharmacokinetic study of protoapigenone in rats after oral administration of protoapigenone. It was shown that protoapigenone could be absorbed rapidly after oral administration and could reach the maximum concentration within 1 h. Copyright © 2013 John Wiley & Sons, Ltd.