Spectrophotometric quantification of fluoxetine hydrochloride: Application to quality control and quality assurance processes

Simple and rapid spectrophotometric methods have been developed for the microdetermination of fluoxetine HCl. The proposed methods are based on the formation of ion-pair complexes between fluoxetine and bromophenol blue (BPB), bromothymol blue (BTB), bromocresol green (BCG), and bromocresol purple (BCP) which can be measured at optimum λ_max. Optimization of reaction conditions was investigated. Beerșs law was obeyed in the concentration ranges of 0.5–8.0 μg mL⁻¹, whereas optimum concentration as adopted from the Ringbom plots was 0.7–7.7 μg mL⁻¹. The molar absorptivity, Sandell sensitivity, and detection limit were also calculated. The most optimal and sensitive method was developed using BCG. The correlation coefficient was 0.9988 (n = 6) with a relative standard deviation of 1.25, for six determinations of 4.0 μg mL⁻¹. The proposed methods were successfully applied to the determination of fluoxetine hydrochloride in its dosage forms and in biological fluids (spiked plasma sample) using the standard addition technique.     

Application of non-steroidal anti-inflammatory drugs for palladium determination

A highly sensitive spectrophotometric method for palladium determination using piroxicam and tenoxicam as new chromogenic reagents has been developed. In the presence of sodium lauryl sulfate (SLS), palladium reacts with piroxicam (PX) or tenoxicam (TX) to form stable yellow orange complexes in an acetate buffer solution of pH 5.0 at 424 nm and 426 nm with molar absorptivity of 7.16 × 10⁴ L mol⁻¹ cm⁻¹ and 1.20 × 10⁵ L mol⁻¹ cm⁻¹, respectively. Sandell sensitivity, detection, and quantitation limits were also calculated. Optimum conditions were evaluated considering pH, reagent concentration, time, temperature, and surfactant concentration. The complex system conforms to Beer’s law over the range of 0.07–1.28 μg mL⁻¹ palladium. The stoichiometric ratio and stability constant were also evaluated. Tolerance limits of many cations and anions were determined. Finally, the proposed method was applied successfully in the determination of palladium in jewellery, anode mud, synthetic mixtures, catalysts, and alloy samples.     

Biosorption of Cadmium,Lead, and Uranium by Powder of Poplar Leaves and Branches

The removal of metal ions from aqueous solutions by biosorption plays an important role in water pollution control. In this study, dried leaves and branches of poplar trees were studied for removing some toxic elements (cadmium, lead, and uranium) from aqueous solutions. The equilibrium experiments were systematically carried out in a batch process, covering various process parameters that include agitation time, adsorbent size and dosage, initial cadmium, lead and uranium concentration, and pH of the aqueous solution. Adsorption behavior was found to follow Freundlich and Langmuir isotherms. The results have shown that both dried leaves and branches can be effectively used for removing uranium, while only branches were found to remove lead and cadmium completely from the aqueous solution. The maximum biosorption capacity of leaves for uranium was found to be 2.3 mg g⁻¹ and 1.7 mg g⁻¹ and 2.1 mg g⁻¹ for lead and cadmium on branches, respectively. In addition, the studied biomass materials were used in removing lead and cadmium from contaminated water and the method was found to be effective.     

First Synthesis of Thienopyrazole Thioglycosides

Reported is the first method to prepare a new class of thienopyrazole thioglycosides via a one‐pot reaction of the sodium thienopyrazolthiolate salts with 2,3,4,6‐tetra‐O‐acetyl‐α‐D‐gluco‐and galactopyranosyl bromides. The sodium thienopyrazolthiolate salts are prepared using pyrazoldithioic acids and their corresponding mono ‐ and dithiolate salts.     

SBA-15-SO3H-assisted preparation of 4-aza-phenanthrene-3,10-dione derivatives via a one-pot,four-component reaction

Research on Chemical Intermediates - A novel four-component approach for the synthesis of 1-phenyl-1,4-dihydro-2H-9-oxa-4-aza-phenanthrene-3,10-dione derivatives has been presented via the reaction...     

Thermal resistance,microstructure and mechanical properties of type I Portland cement pastes containing low-cost nanoparticles

This study aimed to utilize laboratory-prepared nano-silica (NS) and nano-alumina (NA) as low-cost nano-oxides additions for improving the mechanical properties and thermal resistance of hardened ordinary Portland cement (OPC) pastes. NS was synthesized from rice husk ash in the absence of any surfactant, while NA was synthesized from AlCl₃ in the presence of CTAB as a surfactant. The average particle sizes of synthesized NS and NA were 30 and 40 nm, respectively. Nano-silica or nano-alumina was added to OPC as a single phase with different ratios of 0.5, 1, 2 and 3 by mass % of OPC. The physico-chemical characteristics of different OPC-NS and OPC-NA hardened pastes were studied after 1, 3, 7, 14, 28 and 90 days of hydration. The resistance of the hardened composites for firing was evaluated for specimens cured for 28 days under tap water and then fired at 300, 600 and 800 °C for 3 h. The fired specimens were cooled by two methods: gradual cooling and rapid cooling. The compressive strength test was performed for all mixes at each firing temperature. The compressive strength results revealed that the optimum addition of NS is 1, whereas the optimum addition of NA is 0.5 by mass % of OPC. XRD, TG/DTG and SEM results indicated that ill-crystalline and nearly amorphous C–S–H, C–A–S–H and C–A–H were the main hydration products.     

Zeolite nanoparticles (H-ZSM5) as a highly efficient,green, and reusable heterogeneous catalyst for selective oxidation of sulfides to sulfoxides under mild conditions

H-ZSM5 is applied as an efficient, highly reusable, and heterogeneous catalyst for the oxidation of sulfides to sulfoxides using 30% H₂O₂ under solvent-free conditions at room temperature. A variety of aromatic and aliphatic sulfides with different functional groups were successfully oxidized with good to excellent yields in short reaction times. The catalyst can be easily recovered by simple filtration and recycled for several consecutive runs without any significant loss of its catalytic activity.     

New enantiomeric polylactide-block-poly(butylene succinate)-block-polylactides: syntheses, characterization and in situ self-assembly

In situ self-assemblies of new biodegradable triblock PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA have been investigated in acetonitrile solution. At first, two series of PLLA-b-PBS-b-PLLA and PDLA-b-PBS-b-PDLA, respectively denoted as the P and Q triblock copolyester series, were prepared with fixed PBS block ((overline) M(n,NMR) = 6.9 kDa) and diverse enantiomeric PLLA/PDLA blocks. Further, their chemical structures and thermal properties were characterized by means of titration, nuclear magnetic resonance spectroscopy (NMR), gel permeation chromatography (GPC), polarimeter, wide-angle X-ray diffraction (WAXD) and thermal analytical instruments. When mixing the synthesized enantiomeric copolyester pairs denoted as P(1)/Q(1) - P(8)/Q(8) in acetonitrile solution at 60 degrees C, in situ self-assemblies were found to happen for the P(4)/Q(4) to P(8)/Q(8) pairs, bearing longer enantiomeric PLA block lengths. DSC and WAXD analysis of the self-assembled microparticles demonstrated that PLLA/PDLA racemic crystals were formed for the P(5)/Q(5) - P(8)/Q(8) systems, as evidenced by their melting points over 200 degrees C, and a new X-ray diffraction peak detected at 2theta = 11.8 degrees . Moreover, morphological studies by scanning electron microscopy (SEM) indicated the formation of disk- or platelet-like microparticles. It was noted that the diameters of the microparticles self-assembled in situ decreased from 1.28-1.50 mum down to 480-660 nm, through tailoring the enantiomeric PLA block length. Other factors, such as a central PBS block, the enantiomeric block length and the preparation conditions were suggested to play important roles in the in situ self-assembly of these enantiomeric triblock copolyesters. These results provide a facile way to self-assemble hydrophobic, biodegradable microparticles, through tuning the important van der Waals stereocomplexation interactions between two enantiomeric blocks in solution.     

Efficient Oxidation of Alcohols to Carbonyl Compounds by N,N‐Dichloro‐4‐Methylbenzenesulfonamide under Mild Conditions

A number of aldehydes and ketones were prepared by oxidation of alcohol by N,N‐dichloro‐4‐methylbenzenesulfonamide under mild and neutral conditions in good to high yield in dichloromethane at room temperature.     

Synthesis of TiO(2)-PMMA nanocomposite: using methacrylic acid as a coupling agent

Inorganic-polymer nanocomposites are of significant interest for emerging materials due to their improved properties and unique combination of properties. Methacrylic acid (MA), a functionalization agent that can chemically link TiO2 nanomaterials (n-TiO2) and polymer matrix, was used to modify the surface of n-TiO2 using a Ti-carboxylic coordination bond. Then, the double bond in MA was copolymerized with methyl methacrylate (MMA) to form a n-TiO2-PMMA nanocomposite. The resulting n-TiO2-PMMA nanocomposite materials were characterized by using thermal analysis, electron microscopy, and elemental analysis. The dynamic mechanical properties (Young's and shear modulus) were measured using an ultrasonic pulse technique. The electron microscopy results showed a good distribution of the nanofillers in the polymer matrix. The glass transition temperature, thermal degradation temperature, and dynamic elastic moduli of the nanocomposites were shown to increase with an increase in the weight percentage of nanofibers in the composite. The resulting nanocomposites exhibited improved elastic properties and have potential application in dental composites and bone cements.