Swarm intelligence-based hyper-heuristic for the vehicle routing problem with prioritized customers

The vehicle routing problem (VRP) is a combinatorial optimization management problem that seeks the optimal set of routes traversed by a vehicle to deliver products to customers. A recognized problem in this domain is to serve ‘prioritized’ customers in the shortest possible time where customers with known demands are supplied by one or several depots. This problem is known as the Vehicle Routing with Prioritized Customers (VRPC). The purpose of this work is to present and compare two artificial intelligence-based novel methods that minimize the traveling distance of vehicles when moving cargo to prioritized customers. Various studies have been conducted regarding this topic; nevertheless, up to now, few studies used the Cuckoo Search-based hyper-heuristic. This paper modifies a classical mathematical model that represents the VRPC, implements and tests an evolutionary Cuckoo Search-based hyper-heuristic, and then compares the results with those of our proposed modified version of the Clarke Wright (CW) algorithm. In this modified version, the CW algorithm serves all customers per their preassigned priorities while covering the needed working hours. The results indicate that the solution selected by the Cuckoo Search-based hyper-heuristic outperformed the modified Clarke Wright algorithm while taking into consideration the customers’ priority and demands and the vehicle capacity.

     

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.     

An efficient and chemoselective method for protection of thiols catalyzed by aluminumdodecatungstophosphate (AlPW12O40), as a highly water tolerant Lewis acid catalyst

Protection of various thiols with diphenylmethanol was achieved in high yields at room temperature using catalytic amounts of AlPW₁₂O₄₀ in CH₂Cl₂. In the presence of this catalyst, protection of SH versus OH was achieved with high chemoselectivity and yields. The catalyst can be easily recovered and reused. Deprotection of DPM thioethers was also achieved using molecular iodine at reflux in CH₂Cl₂ in high yields.     

Photocatalytic ozonation degradation of ciprofloxacin using ZnO nanoparticles immobilized on the surface of stones

Ciprofloxacin is used in the treatment of bacterial infections. Because ciprofloxacin is not effectively degraded by biological processes, advanced oxidation processes such as photocatalytic ozonation are applied to remove this antibiotic from wastewater. The aim of this study was to investigate photocatalytic ozonation for the removal of ciprofloxacin from aquatic environments and optimization of the effective parameters of the process. For this purpose, ZnO nanoparticles were synthesized using the thermal method and immobilized on the surface of stones. The structural properties of the nanoparticles were determined by XRD, TEM, Photoluminescence (PL) and SEM. Experiments were carried out in a Plexiglas reactor supported with the continuous injection of ozone. The effective parameters for removal efficiency were reaction time, initial concentration of ciprofloxacin, pH, photocatalyst concentration and reaction kinetics. The highest ciprofloxacin removal efficiency occurred at the following optimal conditions: pH of 7, reaction time of 30?min, photocatalyst concentration of 3?g/L and initial ciprofloxacin concentration of 10?mg/L. Removal efficiency of 96% was obtained under these conditions. Linear kinetic models showed that the process followed pseudo-first order and Langmuir-Hinshelwood kinetics. This process had a high removal efficiency and suitable for removal of ciprofloxacin from aquatic environments.GRAPHICAL ABSTRACT     

An Easy One-Pot Procedure for the Synthesis of <Emphasis Type="Italic">N</Emphasis>-Sulfonyl Phosphorous Ylides and Sulfonyl Iminophosphoranes

Summary. Reaction of triphenylphosphine and an electron deficient acetylenic ester in the presence of strong N–H acid such as alkyl and aryl sulfamides or acetamide produces phosphorous ylides at room temperature in CH₂Cl₂. The aryl sulfamide phosphoranes undergo a smooth transformation reaction in boiling toluene and produce iminophosphoranes.     

Energy dispersive X-ray fluorescence analysis of chloride in reforming catalysts

A relatively less expensive Phillips PV 9500/SY 585 automatic energy dispersive X-ray fluorescence (EDXFR) spectrometer with rhodium target, was modified using a commercial kitchen aluminium wrapping foil filter, for the determination of chloride in bifunctional reforming catalysts. Quantitation of chloride was carried out by the Claisse-Quintin method with a catalyst sample of known chloride content as an external standard. The results of EDXRF chloride analysis of different catalyst samples, containing varying amounts of percent carbon and chloride, compared well (p>0.75) with those obtained by silver chloride precipitation method. The small values of percent relative standard deviations at 0.4 to 4.5% showed a good reproducibility of the method. With the total analysis time of a few minutes combined with no sample preparation, the present method seems to be superior as compared to presently employed methods of chloride analysis in reforming catalysts.     

Indirect Determination of Sulfide by Cold Vapor Atomic Absorption Spectrometry

A method for the determination of sulfide based on its interference with the determination of Hg by cold vapor atomic absorption spectrometry is described. The decrease in mercury absorbance at 253.7nm is proportional to the concentration of sulfide over the range of 10–320ngmL^–1. The limit of detection was found to be 7ngmL^–1 and the relative standard deviation (R.S.D.) for the determination of different concentrations of sulfide was in the range of 1.8–2.2%. This method was applied to the determination of sulfide in whole human blood after gas-phase separation.     

Syntheses of 1-substituted 1,2,4-triazoles,imidazoles and benzimidazoles

Substituted 2-phenethyl-1,2,4-triazoles, 1-phenethylimidazoles 3 and 1-phenethylbenzimidazoles 5 were synthesized from the reaction of compound 8 with tri-n-butyltin hydride in good yield. The reaction of substituted-2-phenethyl halide with 1H-1,2,4-triazoles, imidazoles and benzimidazoles gave a low yield. The yield was increased by the use of substituted-2-phenethyl p-toluensulfonate.     

Radiochemical separation of99Mo from natural uranium irradiated with thermal neutrons

⁹⁹Mo was separated from uranium and insoluble fission product hydroxides. More than 98% of⁹⁹Mo radioactivity was extracted with bis (2-ethylhexyl)phosphoric acid. The organic phase was washed and⁹⁹Mo was back-extracted from the organic phase with NH₄OH solution. The percent recovery from the organic phase was 91% and the purity of⁹⁹Mo was more than 99%. Pure^99mTc was also extracted from the organic phase with a saline solution. Reversed-phase partition chromatography was used for the purification of⁹⁹Mo from¹³¹I and other fission products (10% HDEHP on kieselguhr bed).¹³¹I and other isotopes were quantitatively eluted with 0.1M H₂SO₄,⁹⁹Mo was eluted using a mixture of 0.5 M HCl and 30% H₂O₂.     

Thermoanalytical study of linkage isomerism in coordination compounds: Part I. Reinvestigation of thermodynamic and thermokinetic of solid state interconversion of nitrito (ONO) and nitro (NO2) isomers of pentaaminecobalt(III) chloride by means of DSC

Solid state thermal isomerization of [Co(NH₃)₅(ONO)]Cl₂ (nitrito isomer) to [Co(NH₃)₅(NO₂)]Cl₂ (nitro isomer) and reverse reaction were investigated by non-isothermal differential scanning calorimetry (DSC) and found to be essentially an equilibrium process. The interconversions are accelerated at above 65 °C and reach to equilibrium state at about 155 °C. After establishment of the equilibrium the relative amounts of two isomers at any temperature are governed by Gibbs free energy relationship. The experimental enthalpy changes of isomerization of pure nitrito and nitro solid samples to the equilibrium state are −4.67 (±0.19) and 0.99 (±0.05) kJ mol⁻¹, respectively. From these values, total enthalpy change was calculated as: ΔH°=−5.66(±0.20) kJ mol⁻¹. Using Gibbs free energy relationship, equilibrium constant, total free energy and entropy changes were estimated at 60 °C as: K=7.72(±0.8),  kJ mol⁻¹ and  J K⁻¹ mol⁻¹.An initial rate method has been developed to determine the kinetic parameters of these reactions from non-isothermal DSC data. Both nitro to nitrito and reverse reactions obey first order kinetic law in solid state. Estimated activation parameters of forward and reverse paths at 60 °C are , , and , respectively. The negative activation entropy of both directions support the intramolecular mechanism of isomerization, including formation of a seven coordinate transition state, which formerly suggested based on spectral and X-ray methods.