Effect of pulegone and pulegone oxide on the corrosion of steel in 1?M HCl

The inhibitive action of pulegone and pulegone oxide toward acid corrosion of steel in molar hydrochloric acid was studied by weight loss measurements, potentiodynamic polarization, and impedance spectroscopy (EIS) methods. The pulegone is extracted starting from oil of Pennyroyal Mint (Mentha pulegium). The natural compound was found to delay the corrosion rate. The pulegone oxide is prepared by oxidation of pulegone. The inhibition efficiency was found to increase with the inhibitor content to attain 81 and 75% at 5 g dm⁻³ for pulegone and pulegone oxide. The increase in temperature leads to an increase in the inhibition efficiency of the natural compared.     

Comparison of different approaches for thermal performance improvement of a phase change energy storage system

Journal of Thermal Analysis and Calorimetry - Performance improvement of a phase change material (PCM) thermal storage system is numerically investigated. A finite volume solver is employed to...     

Mechanical properties of diboron-porphyrin sheet under strain: A density functional theory study

The mechanical properties of a new two-dimensional semiconductor material named diboron-porphyrin (DP) are studied based on density functional theory. The behavior of DP monolayer under uniaxial and biaxial loadings as well as shear stress is investigated. The in-plane stiffness, Poisson's ratio, bulk and shear moduli of the DP monolayer are found to be close to those of a graphene sheet. It can be concluded that the DP monolayer has stiffness close to the graphene sheet. The difference in magnitude of in-plane stiffness and Poisson's ratio along x- and y-directions shows slightly anisotropic mechanical properties of DP monolayer. It is also observed that DP monolayers can bear high tensile strains before failure. The high stability and hardly deformable structure of DP monolayer are due to its high planar packing density which is comparable with graphene sheet. The fantastic mechanical properties of DP show these materials are desirable for application in nanomechanical devices.     

Spectral, spatial and temporal characteristics of a millisecond pulsed glow discharge: metastable argon atom production

Time resolved atomic emission, atomic absorbance, and laser-induced atomic fluorescence measurements of a millisecond pulsed glow discharge, made perpendicular to the insertion probe, provide temporal profiles of 1s₅ (³P₂) and 1s₃ (³P₀) metastable argon atom populations. Acquisition of these profiles at different spatial positions in the plasma provides data from which two-dimensional spatial plots of relative populations are constructed. Each map, the result of 368 individual pulse profiles, provides insight into the production of metastable argon atoms as a function of time and position within the plasma. During power application, intensities plateau after 3 ms as the plasma reaches a steady state condition. Metastable argon atoms are most abundant 1–2 mm above the cathode surface during this time. Excitation mechanisms such as electron excitation and fast atom/ion impact appear to dominate in this temporal regime. In contrast, argon ion–electron recombination dominates metastable formation after pulse termination. The relative population maximum for metastable argon atoms in the afterpeak shifts to 5–9 mm above the cathode surface. This shift should impact signals for analyte species generated by Penning processes in the plasma. Absorption and fluorescence measurements of the ³P₂ (11.55 eV) and the ³P₀ (11.72 eV) metastable argon atom states indicate possible differences in the populations of these two states between the plateau and afterpeak time regimes.     

KF/Al2O3‐Mediated N‐Alkylation of Amines and Nitrogen Heterocycles and S‐Alkylation of Thiols

KF/Al₂O₃ efficiently catalyzes N‐alkylation of heterocyclic, primary, and secondary amines and S‐alkylation of thiols with a variety of alkyl halides. The N‐alkylation and S‐alkylation adducts were produced in good to excellent yields and in short times.     

Experimental and Theoretical Study of Enhanced Photocatalytic Activity of Mg‐Doped ZnO NPs and ZnO/rGO Nanocomposites

A systematic experimental and theoretical study of the origin of the enhanced photocatalytic performance of Mg‐doped ZnO nanoparticles (NPs) and Mg‐doped ZnO/reduced graphene oxide (rGO) nanocomposites has been performed. In addition to Mg, Cd was chosen as a doping material for the bandgap engineering of ZnO NPs, and its effects were compared with that of Mg in the photocatalytic performance of ZnO nanostructures. The experimental results revealed that Mg, as a doping material, recognizably ameliorates the photocatalytic performance of ZnO NPs and ZnO/graphene nanocomposites. Transmission electron microscopy (TEM) images showed that the Mg‐doped and Cd‐doped ZnO NPs had the same size. The optical properties of the samples indicated that Cd narrowed the bandgap, whereas Mg widened the bandgap of the ZnO NPs and the oxygen vacancy concentration was similar for both samples. Based on the experimental results, the narrowing of the bandgap, the particle size, and the oxygen vacancy did not enhance the photocatalytic performance. However, Brunauer–Emmett–Teller (BET) and Barret–Joyner–Halenda (BJH) models showed that Mg caused increased textural properties of the samples, whereas rGO played an opposite role. A theoretical study, conducted by using DFT methods, showed that the improvement in the photocatalytic performance of Mg‐doped ZnO NPs was due to a higher electron transfer from the Mg‐doped ZnO NPs to the dye molecules compared with pristine ZnO and Cd‐doped ZnO NPs. Moreover, according to the experimental results, along with Mg, graphene also played an important role in the photocatalytic performance of ZnO.     

A Simple Method for Melatonin Determination in the Presence of High Levels of Tryptophan using an Unmodified Carbon Paste Electrode and Square Wave Anodic Stripping Voltammetry

Electrochemical determination of melatonin in the presence of tryptophan is a challenge because of the coincidence of voltammetric signals of these compounds when executing a voltammetric technique. The new method for selective determination of melatonin based on the square wave anodic stripping voltammetry determination of an electroactive product of melatonin was suggested here. This product is produced by previously applied positive pre-potential to a carbon paste electrode, immersed in the test solution. By this means, the electrochemical signal of melatonin was separated effectively from that of tryptophan, making it possible to determine melatonin in the presence of a high concentration of tryptophan. The effect of important parameters on electrode performance was studied and optimized. The optimum response was obtained at pH=2 and utilizing the pre-potential magnitude of +0.8 V, applied for 10 s. A linear relationship was found between peak current intensity and melatonin concentrations over the range of 5.00×10⁻⁷ to 8.00×10⁻⁵ mol L⁻¹. A detection limit of 8.30×10⁻⁸ mol L⁻¹ was calculated for the method (S/N=3). The selectivity of the method was considerably high, because of the independence of melatonin signal to the presence of higher amounts of some potentially interfering agents such as ascorbic acid, tryptophane glucose, etc. As an analytical application, the proposed sensor was used for the determination of melatonin in pharmaceutical and food samples.     

Determination of organophosphorus pesticides by gas chromatography with mass spectrometry using a large‐volume injection technique after magnetic extraction

A fast and efficient method was developed for the extraction and determination of organophosphorus pesticides in water samples. Organophosphorus pesticides were extracted by solid‐phase extraction using magnetic multi‐walled carbon nanotubes and determined by gas chromatography with ion‐trap mass spectrometry. Parameters affecting the extraction were investigated. Under optimum conditions of the method, 10 mg magnetic multi‐walled carbon nanotubes were added into 10 mL sample. After 2 min, adsorbent particles settled at the bottom of test tube with a magnet. After removing aqueous supernatant, the analytes were desorbed with acetonitrile. Then, 70 μL of acetonitrile phase was injected into the gas chromatography and mass spectrometry system that had an ion‐trap analyzer. To achieve high sensitivity, the large‐volume‐injection technique was used with a programmed temperature vaporization inlet, and the ion‐trap mass spectrometer was operated in single ion storage mode. Under the best conditions, the enrichment factors and extraction recoveries were in the range of 113–124 and 74–103%, respectively. The limits of detection were between 3 and 15 ng/L, and the relative standard deviations were < 10%. This method was successfully used for the determination of organophosphorus pesticides in dam water, lagoon water, and river water samples with good reproducibility and recovery.