Chemoselective and Solvent‐Free Thioacetalization of Aldehydes by a Catalytic Amount of NBS

A chemoselective, straightforward, and rapid method for thioacetalization of aldehydes by use of 1,2‐ethandithiol and a catalytic amount of N‐bromosuccinimide under solvent‐free conditions is reported. The reaction takes place in excellent yields and short reaction times.     

Characterization of Chitosan/Alginate Self-Assembled Nanoparticles as a Protein Carrier

The aim of this study was to evaluate the effect of the polymeric ratios on the characteristics of chitosan/alginate (ch/alg) self-assembled nanoparticles and their potential as protein delivery vehicle. The nanoparticles were prepared using proper mixing of polymers in presence or absence of bovine serum albumin (BSA) as a protein model. Three formulations of nanoparticles comprising ch/alg ratios of 2:1, 1:1, and 1:2 were prepared. Size, shape and zeta potential of the formulations were studied by scanning electron microscopy (SEM) and nanosizer instruments. FTIR, and differential scanning calorimetery (DSC) studies were performed to investigate polymer-polymer or polymer-protein interactions. Release profiles and entrapment efficiencies of the nanoparticles were determined by calorimetric technique using appropriate techniques. Entrapment efficiency was 70% for ch/alg ratio of 1:1, 65% for 1:2, and 60% for 2:1. The z-average size of the nanoparticles were 403, 205, and 318 nm for ch/alg ratios of 2:1, 1:1, and 1:2, respectively. Average zeta potentials were ?47, +15, ?25 mV for 2:1, 1:1, and 1:2 as well. Considering the favorable features required for protein delivery systems, ch/alg (1:1) due to its smallest size, highest loading, and most homogenous shape was regarded as the best ratio.     

A quick and green ionic liquid-mediated approach for the synthesis of high-performance, organosoluble and thermally stable polyimides

Three diamine monomers with different derivatives of imidazole heterocyclic ring and meta-linked aryl ethers were synthesized and used in polycodensation reaction with various commercial dianhydrides for preparation of a series of novel poly(ether-imide) (PEI)s. The polycodensation reactions were carried out by using conventional method and in a green medium of ionic liquid (IL) without using NMP-pyridine-acetic anhydride. The PEIs were obtained in good yields (80% 96%) with moderate viscosity (0.48 0.66 dL/g) in a shorter reaction time (10 h) in IL as compared with the conventional method (36 h). All of the polymers were amorphous in nature, showed excellent solubility in amide-type polar aprotic solvents with ability to form tough and flexible films, and excellent thermal stability with Tgs in the range of 212 340 ℃ and 10% weight loss temperature (T10) up to 570℃ in N 2 and 528 ℃ in air.     

Synthesis and Characterisation of Bismuth(III) Aminoarenesulfonate Complexes and Their Powerful Bactericidal Activity against Helicobacter pylori

The synthesis and characterisation of nine new tris‐substituted bismuth(III) aminoarenesulfonates of the general formula [Bi(O₃S‐R^N)₃] (R^N=o‐aminophenyl 1 , m‐aminophenyl 2 , 6‐amino‐3‐methoxyphenyl 3 , p‐aminophenyl 4 , 2‐pyridyl 5 , o‐aminonaphthyl 6 , 5‐aminonaphthyl 7 , 4‐amino‐3‐hydroxynaphthyl 8 and 5‐isoquinolinyl 9 ) is described. Two synthetic strategies, using Ag₂O and [Bi(OtBu)₃], were explored and compared. The possibility to access heteroleptic bismuth(III) complexes with the new silver(I) metathesis reaction is demonstrated with the synthesis of the heteroleptic bismuth(III) aminoarenesulfonate complexes [PhBi(O₃S‐P2)₂(dmso)] 10 , [Ph₂Bi(O₃S‐P2)]_∞ 11 and [PhBi(O₃S‐P2)₂]_∞ 12 , of which the solid state structures 10 and 12 are presented (2P‐SO₃^?=2‐pyridinesulfonate). These complexes offer remarkable in‐vitro activity against three standard laboratory strains of Helicobacter pylori (H. pylori) as demonstrated by their exceptionally low minimum inhibitory concentration (MIC) values of 0.049 μg mL^?1 for the strains 251 and B128, which places most MIC values in the nano‐molar region. These results demonstrate the importance of the amino functionality in addition to the sulfonate group on the bactericidal properties against H. pylori.     

Highly Selective One-Pot Coupling Reaction of Indole,Aromatic Aldehydes,and 4-hydroxycoumarin Using Copper Octoate as a Homogeneous Catalyst

A facile protocol for the one-pot, multicomponent reaction of indole, 4-hydroxycoumarin, and aromatic aldehydes was developed using copper octoate as an inexpensive, commercially available, and efficient catalyst. This highly selective reaction eliminates the formation of homodimeric by-products (bisindoles and biscoumarins) and selectively results in the formation of heterodimeric adducts containing both indole and coumarin heterocycles.     

Nanofluid in Hydrophilic State for EOR Implication Through Carbonate Reservoir

More than 50% of oil is trapped in petroleum reservoirs after applying primary and secondary recovery methods for removal. Thus, to produce more crude oils from these reservoirs, different enhanced oil recovery (EOR) approaches should be performed. In this research, the effect of hydrophilic nanoparticles of SiO₂ at 12 nm size, in (EOR) from carbonate reservoir is systematically investigated. Using this nanoparticle, we can increase viscosity of the injection fluid and then lower the mobility ratio between oil and nanofluid in carbonate reservoirs. To this end, a core flooding apparatus was used to determine the effectiveness and robustness of nanosilica for EOR from carbonate reservoirs. These experiments are applied on the reservoir carbonate core samples, which are saturated with brine and oil that was injected with nanoparticles of SiO₂ at various concentrations. The output results depict that, with increasing nanoparticle concentration, the viscosity of the injection fluid increases and results in decreased mobility ratio between oil and nanofluid. The results confirm that using the nanoparticle increases the recovery. Also, increasing the nanoparticle concentration up to 0.6% increases the ultimate recovery (%OOIP), but a further increase to 1.0 does not have a significant effect.     

New polypyrrole–carbon nanotubes–silicon dioxide solid‐phase microextraction fiber for the preconcentration and determination of benzene,toluene, ethylbenzene,and o‐xylene using gas liquid chromatography

For the first time, a polypyrrole–carbon nanotubes–silicon dioxide composite film coated on a steel wire was prepared by an electrochemical method. Scanning electron microscopy images showed that this composite film was even and porous. The prepared fiber was used as an absorbent for the headspace solid‐phase microextraction of benzene, toluene, ethylbenzene, and o‐xylene, followed by gas chromatographic analysis. This method presented an excellent performance, which was much better than that of a polypyrrole–carbon nanotube fiber. It was found that under the optimized conditions, the linear ranges were 0.01–200 ng/mL with correlation coefficients >0.9953, the detection limits were 0.005–0.020 ng/mL, the relative standard deviations were 3.9–6.4% for five successive measurements with a single fiber, and the reproducibility was 5.5–8.5% (n = 3). Finally, the developed method was successfully applied to real water samples, and the relative recoveries obtained for the spiked water samples were from 91.0 to 106.7%.     

Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture

To address the issue of global warming and climate change issues, recent research efforts have highlighted opportunities for capturing and electrochemically converting carbon dioxide (CO₂). Despite metal doped polymers receiving widespread attention in this respect, the structures hitherto reported lack in ease of synthesis with scale up feasibility. In this study, a series of mesoporous metal-doped polymers (MRFs) with tunable metal functionality and hierarchical porosity were successfully synthesized using a one-step copolymerization of resorcinol and formaldehyde with Polyethyleneimine (PEI) under solvothermal conditions. The effect of PEI and metal doping concentrations were observed on physical properties and adsorption results. The results confirmed the role of PEI on the mesoporosity of the polymer networks and high surface area in addition to enhanced CO₂ capture capacity. The resulting Cobalt doped material shows excellent thermal stability and promising CO₂ capture performance, with equilibrium adsorption of 2.3 mmol CO₂/g at 0 °C and 1 bar for at a surface area 675.62 m²/g. This mesoporous polymer, with its ease of synthesis is a promising candidate for promising for CO₂ capture and possible subsequent electrochemical conversion.     

Energy and exergy analysis of a novel turbo-compounding system for supercharging and mild hybridization of a gasoline engine

Journal of Thermal Analysis and Calorimetry - Number of hybrid vehicles has increased around the world significantly. Automotive industry is utilizing the hybridization of the powertrain system to...