Numerical prediction of humidification process in planar porous membrane humidifier of a PEM fuel cell system to evaluate the effects of operating and geometrical parameters

In present study, a numerical model is employed to investigate the effects of different operating parameters and channel geometry on the performance of membrane humidifier. Simulations are performed by a commercial CFD code and based on user defined functions. Three-dimensional counter-flow humidifier model for a gas-to-gas case is considered. Results show that an increase in porosity or permeability leads to better humidification. Moreover, increase in inlet temperature of dry and wet channels as well as inlet mass flowrate of water vapor would enhance humidifying process. On the other hand, by reduction in inlet mass flowrate of gas channel and thickness of the porous medium in membrane, better humidifier performance would be achieved. To investigate the geometric parameters, three different channel types including stepped, sinusoidal and zigzag are considered. It is found that stepped geometry has the best performance in humidifying.

     

99mTc-radiolabeled imidazo[2,1-b]benzothiazole derivatives as potential radiotracers for glioblastoma

This study presents [^99mTc]BPTG-1 and [^99mTc]BPTG-2 for glioblastoma imaging. In vitro cellular uptakes of these radiotracers were examined in SKOV-3, MCF-7, U87-MG, HT-29, and A549 cell lines. U87-MG cell line displayed the highest radiotracers uptakes. Biodistribution study in U87-MG tumor bearing mice revealed higher uptake of radiotracers in tumor than muscle and brain. Liver, intestine, and kidneys displayed the highest radioactivity uptakes. The main route of radiotracers elimination was hepatobiliary. Due to the brain uptake of these radiotracers, they are promising radiotracers for future studies in the diagnosis of glioblastoma.

     

Size Control of FePt Nanoparticles Produced by Seed Mediated Growth Process

Monodisperse FePt nanoparticles with average size of 2.4?nm were successfully synthesized via chemical co-reduction of iron acetylacetonate, Fe(acac)₃, and platinum acetylacetonate, Pt(acac)₂, by 1,2-hexadecanediol as a reducing agent and oleic acid and oleyl amine as surfactant. Then using the seed mediated growth process smaller sized FePt nanoparticles are used as seeds for the growth of larger sized FePt particles and there is no specific limitation to achieve upper size range by this method. In this work, we could synthesize FePt nanoparticles up to 4.0?nm. Monodispersity with relatively narrow size distribution and having the same elemental composition with the atomic percentage of Fe _x Pt_100?x (x?=?63) are the main advantages of this method. As-made FePt nanoparticles have the chemical disordered face centered cubic structure with superparamagnetic behavior at room temperature. After annealing these particles become ferromagnetic with high magnetocrystalline anisotropy and their coercivity increases with increasing particle sizes and reaches a maximum value of 5,200?Oe for size of 46.5?nm     

EIS and adjunct electrical modeling for material selection by evaluating two mild steels for use in super-alkaline mineral processing

The production of metal concentrates during mineral processing of ferrous and non-ferrous metals involves a variety of highly corrosive chemicals which deteriorate common mild steel as the material of choice in the construction of such lines, through rapid propagation of localized pitting in susceptible parts, often in sensitive areas. This requires unscheduled maintenance and plant shut down. In order to test the corrosion resistance of different available materials as replacement materials, polarization and electrochemical impedance spectroscopy (EIS) tests were carried out. The EIS numerical outputs were then transformed into an equivalent electric circuit using Z-View software, and the predictive behavior was contrasted with actual performance after long-term immersion, depicted through SEM, EDS, XRD and weight change observations. Also, results of pits and cracks, obtained with climax software-enhanced polarization resistance, and reduced capacitance added to much diminished current densities, verified the acceptable performance of CK₄₅ compared with high priced stainless steel substitutes with comparable operational life. Therefore, CK₄₅ can be a suitable alternative in steel constructions which are exposed to super-alkaline and corrosive environments.     

A cost-effective form-stable PCM composite with modified paraffin and expanded perlite for thermal energy storage in concrete

Journal of Thermal Analysis and Calorimetry - High thermal conductivity in phase change materials (PCM) is preferred in thermal energy storage (TES) systems. Carbon additives are considered as...     

A Modified Peng–Robinson Equation of State for Heavy Hydrocarbons

Russian Journal of Physical Chemistry A - A new simple and accurate functional form for an attractive parameter α is introduced for Peng–Robinson equation of state. The modified...     

Recent approaches to the synthesis of thieno[2,3-b]pyridines (microreview)

Chemistry of Heterocyclic Compounds - This microreview describes recent approaches to the synthesis of thieno[2,3-b]pyridine derivatives. Selected works published in 2015–2019 are reviewed.     

费托合成反应中纳米铁催化剂上La和Ba助剂的协同效应(英文)

Effect of promoters such as Barium and Lanthanum has been investigated on the conventional nanostructured iron catalyst in Fischer-Tropsch synthesis (FTS). The nanosized iron-based catalysts were prepared by a microemulsion method with the general formulation of 100Fe/4Cu, 100Fe/4Cu/2La, 100Fe/4Cu/ 1La/1Ba, and 100Fe/4Cu/2Ba. The phase, structure, and morphology of the catalysts were characterized by X-ray diffraction, N2 adsorption, transmission electron microscopy, temperature-programmed desorption of CO2, and temperature- programmed reduction. The results indicated that the addition of promoters could improve the activity of Fe catalysts for FTS and WGS (water-gas shift reaction) and lower the gas fraction at the outlet. In addition, both Ba- and La-promoted Fe catalysts exhibit the highest activity due to the synergetic effect.     

Poly(<Emphasis Type="Italic">n</Emphasis>-octyl methacrylate) viscosity index improver: Kinetic study via on-line <Superscript>1</Superscript>H-NMR technique

The free radical solution polymerization of n-octyl methacrylate has been studied in benzene-d ₆ in the presence of 2,2′-azobisisobutyronitrile as thermal initiator. An on-line nuclear magnetic resonance spectroscopy was applied to record the reaction data and to determine the monomer conversion at different times during the polymerization reaction. Effect of monomer and initiator concentration as well as reaction temperature on polymerization rate was studied. The order of the reaction with respect to initiator (0.45) was consistent with the classical kinetic rate equation, while the order of reaction with respect to monomer (1.87) was much greater than unity. An overall activation energy (E _a = 53.8 kJ/mol) was obtained over the temperature range 328?338 K. Also, the efficiency of the synthesized poly(n-octyl methacrylate) for improving the viscosity index of the lube oil was investigated.