Investigating the effect of nanolayered silicates on blend segmental dynamics and minor component relaxation behavior in poly(ethylene oxide)/poly(methyl methacrylate) miscible blends

Polymer–silicate nanocomposites based on poly (ethylene oxide), PEO, poly(methyl methacrylate), PMMA, and sodium montmorillonite clay were fabricated and characterized to investigate the effect of nanolayered silicates on segmental dynamics of PEO/PMMA blends. X‐ray results indicate the formation of an exfoliated morphology in the nanocomposites. At low silicate contents, an enhancement in segmental dynamics of blend nanocomposites and also PEO, minor component in blend, is observed at temperature region below blend glass transition. This result can be attributed to the improvement of the confinement effect of rigid PMMA matrix on the PEO chains by introducing a low amount of layered silicates. On the other hand, at high silicate contents, an enhancement in segmental dynamics of blend nanocomposites and PEO is observed at temperature region above blend glass transition. This behavior could be interpreted based on the reduction of monomeric friction between two polymer components, which can facilitate segmental motions of blend components in nanocomposite systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

An Approximation of the Analytical Solution of the Linear and Nonlinear Integro-Differential Equations by Homotopy Perturbation Method

This paper aims to introduce an analytic technique, namely the Homotopy perturbation method (HPM) for the solution of integro-differential equations. From the computational viewpoint, the comparison shows that the homotopy perturbation method is efficient and easy to use.     

A New Approach for Optimization of Distributed Quantum Circuits

International Journal of Theoretical Physics - In the present work, a novel approach was proposed to optimize the teleportation cost in Distributed Quantum Circuits (DQCs) by applying a new...     

PVT properties of imidazolium-, phosphonium-, pyridinium- and pyrrolidinium-based ionic liquids using critical point constants

Song and Mason equation of state (EOS) with a simple modification has been extended to modelling PVT properties of ionic liquids (ILs). The considered ILs are [C₁mim][MeSO4], [C₁mim][CH₃OC₂H₅SO₄], [C₁mim][(CH₃)₂PO₄], [C₂mim][MeSO4], [C₂mim][BF₄], [C₂mim][SCN], [C₂eim][NTf₂], [C₄mim][C(CN)₃], [C₄mim][CF₃SO₃], [C₄mim][SCN], [C₅mim][NTf₂], [C₈mim][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Cl], [(C₆H₁₃)₃P(C₁₄H₂₉)][NTf₂], [(C₆H₁₃)₃P(C₁₄H₂₉)][Ac], [C₃mpyr][NTf₂], [C₄mpyr][NTf₂] and [Py][C₂H₅OC₂H₄SO₄]. Three temperature-dependent parameters in the proposed EOS have been scaled as functions of reduced temperature with the use of the law of corresponding states. It is shown that the knowledge of just critical temperature and critical density is sufficient to predict the PVT properties of these ILs. The overall average absolute deviation of calculated densities from literature values for 1347 data points of 18 ILs was found to be 0.58%. The predicted density of ILs from proposed EOS has been compared with those obtained by other literature work. Moreover, we indicate that the Zeno line regularity can well be predicted by proposed model for ILs.     

Preparation of different graphene nanostructures for hydrogen adsorption

In this study, different types of graphene were synthesized to investigate hydrogen adsorption capacity at different pressures (0–34 bar) at room temperature (298 K). Graphene and nanoporous graphene were prepared by Chemical Vapor Deposition (CVD) method, using methane as a carbon source at a temperature of 900 °C over copper plates and nickel oxide nanocatalyst. The nickel oxide nanocatalyst was prepared by sol–gel method, whereas graphene oxide was prepared through modified Hummer's method. The products were characterized by X‐ray diffraction, field emission‐scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller and Raman spectroscopy. The adsorption of hydrogen was done by volumetric method. High adsorption capacity was achieved in nanoporous graphene because of its high pore volume (2.11 cm³/g) and large specific surface area (850 m²/g). Hydrogen adsorption values for nanoporous graphene, graphene and graphene oxide were determined as 2.56, 1.70 and 0.74 wt%, respectively. In addition, the hydrogen adsorption of graphene nanostructures fitted nicely to the selected two‐parameter and three‐parameter adsorption isotherm models. The adsorption isotherm model coefficients have been found for a 0–34 bar pressure range. The parameter values for all adsorbents showed proper conformity to the model and experimental data. Copyright © 2016 John Wiley & Sons, Ltd.     

Al(H_2PO_4)_3 as an Efficient and Reusable Catalyst for One-pot Three-component Synthesis of α-Amino Phosphonates under Solvent-free Conditions

Synthesis of α‐amino phosphonates is described under solvent‐free conditions at 100°C from reaction between aldehydes and amines in the presence of trialkyl phosphites using Al(H₂PO₄)₃ as an efficient and reusable heterogeneous catalyst. The advantages of this procedure are short reaction time, flexibility and having high to excellent yields.     

Promoter effect on the CO2-H2O formation during Fischer-Tropsch synthesis on iron-based catalysts

The effects of Mg, La and Ca promoters on primary and secondary CO_2 and H_2O formation pathways during Fischer-Tropsch synthesis on precipitated Fe/Cu/SiO_2 catalysts are investigated. The chemisorbed oxygen atoms in the primary pathway formed in the CO dissociation steps reacted with co-adsorbed hydrogen or carbon monoxide to produce H_2O and CO_2 , respectively. The secondary pathway was the water-gas shift reaction. The results indicated that the CO_2 production led to an increase in both primary and secondary pathways, and H_2 O production decreased when surface basicity of the catalyst increased in the order Ca >Mg >La.     

Design and synthesis of a new series of amphiphilic peptide-β-cyclodextrins as phase transfer carriers for glucosamine

A new series of amphiphilic β-cyclodextrins were designed and synthesized by grafting peptide chains on to all primary hydroxyl groups via ester bond formation. The desired amphiphilic structures have been produced from ester connection between the C-6 of β-cyclodextrin and the carboxyl group of N-acetylated resides: H₂N-Leu-COOH, H₂N-Leu-Gly-COOH, H₂N-Leu-Gly-Leu-COOH, and H₂N-Leu-Gly-Leu-Gly-COOH (3a-d). The synthetic pathway involves selective bromination of all primary hydroxyls of β-cyclodextrins and then substitution with the carboxylate moiety of the mentioned N-acetyl residues in the presence of DBU (1,8-diazabicyclo[5,4,0]undec-7-ene). The ability of the synthetic compounds for extraction and phase transfer of glucosamine, as a hydrophilic organic compound, was then studied. The results showed a considerable ability of these amphiphilic compounds for extraction and a selective tendency of 3c for phase transfer of glucosamine.