Thermal Decomposition of Trialkyl/Arylphosphine Gold(I) Cyanide Complexes

Combined TG/DTA techniques have been used to study the thermal decomposition of R₃PAuCN (where Ris ethyl, cyclohexyl, o-tolyl, m-tolyl, p-tolyl, allyl, cyanoethyl,1-naphthyl and phenyl) complexes. It was observed that all of these complexes underwant decomposition cum redox reactions in the range of 200–600oC with evolution of both transligands, which are phosphine and cyanide, leaving metallic gold as a residue. The thermal decomposition of o-Tol₃PAuCN has revealed that this is a stepwise process. In the first step decomposition takes place with evolution of phosphine and generation of AuCN, which in second step undergoes a redox reaction to produce metallic gold. The DTA curves have also confirmed these results. This revised version was published online in July 2006 with corrections to the Cover Date.     

On Controlling Chaos in Cournot-Games with Two and Three Competitors

Controlling chaotic economic systems is an important problem. The Ott, Grebogi and Yorke (1990) method is a way to control chaos gradually. However, in order to apply this method the control parameter has to be close to a prescribed value. To achieve this, the targeting method of Shinbrot Ott, Grebogi and Yorke can be applied first to speed up convergence. In this paper the Ott et al method is modified so that the system is guided gradually out of the chaotic region and in the stability zone. The control parameter does not have to be in a prescribed region. The method is applied to the Puu formulation of Cournot dynamic duopoly and oligopoly models.     

The Kinetics of Tenoxicam Photodegradation in Solution

Photodegradation of tenoxicam was investigated under different reaction conditions. After 60 min of exposure to UV light, the photodegradation was extensive, and the maximum and minimum in the UV-visible spectrum were shifted to shorter and longer wavelengths, respectively. Ethanol exerted a photostabilizing effect on tenoxicam. Tenoxicam is more stable in acidic and basic media than in neutral solution. Increasing light intensity or temperature causes an increase in the rate of photodegradation. The photodegradation of tenoxicam was found to follow first-order kinetics under all these conditions.     

On Generalized Vector Equilibrium Problems

In this paper we prove the existence of solutions of the generalized vector equilibrium problem in the setting of Hausdorff topological vector spaces. As applications, we present some relevant particular cases: a generalized vector variational-like inequality in Hausdorff topological vector spaces, and equilibrium problem in the case of pseudomonotone real functions, and a generalized weak Pareto optima problem.     

Synthesis of novel thiazole and pyrrolothiadiazine derivatives from aldehyde thiosemicarbazones

Substituted thiosemicarbazones 7a–e reacted with ethenetetracarbonitrile (TCNE) in ethyl acetate with formation of 5‐amino‐3‐(substituted ben‐zylidene‐amino)‐2‐phenylimino‐2,3‐dihydrothiazole‐4‐carbonitrile 8a–e 2‐amino‐6‐phenyl‐imino‐1,6‐ dihydropyrrolo[1,3,4]thiadiazine‐3‐carbonitrile 9 , and phenyl‐(5‐{substituted phenyl}‐3H‐[1,3,4]thiadiazole‐2‐ylidene)amines 10a–e . Rationales for the observed conversations are presented. © 2006 Wiley Periodicals, Inc. Heteroatom Chem 17:261–266, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20198     

Pool boiling heat transfer performance of Newtonian nanofluids

Experimental measurements were carried out on the boiling heat transfer characteristics of γ-Al₂O₃/water and SnO₂/water Newtonian nanofluids. Nanofluids are liquid suspensions containing nanoparticles with sizes smaller than 100 nm. In this research, suspensions with different concentrations of γ-Al₂O₃ and SnO₂ nanoparticles in water were studied under nucleate pool boiling heat transfer conditions. Results show that nanofluids possess noticeably higher boiling heat transfer coefficients than the base fluid. The boiling heat transfer coefficients depend on the type and concentration of nanoparticles.     

Non-oscillating/Oscillating Shear Layer over a Large Deep Cavity at Low-Subsonic Speeds

The flow over a deep cavity at low subsonic velocity is considered in the present paper. The cavity length-to-depth aspect ratio is L/H = 0.2. Single hot-wire measurements characterized the incident turbulent boundary layer and show the influence of the cavity on the streamwise statistic components just downstream from the cavity. The streamwise mean and fluctuating velocity profiles are affected by the cavity. PIV measurements reveal the presence for ejection-like events responsible of local perturbations of the skewness and the flatness coefficients. Time-resolved PIV technic is also used to characterize phase properties of shear layer oscillating cycle. It is shown that for deep cavity with first Rossiter mode, only one vortical structure is formed at the cavity leading edge. Then, it grows while convecting downstream along the shear layer. A well-defined ejection process begins after the vortex impact near the cavity downstream corner. A cylinder device placed spanwisely near the cavity leading edge eliminates the resonance and highly modifies the behavior of the shear layer flow. In fact, the shear layer could be divided into upper and lower parts with different structure aspects.     

Purification of L-Lysine in Simulated Moving Bed and Fixed-Bed Chromatography

 L-Lysine was produced by a microbial process utilizing a Corynebacterium glutamicum (ATCC 21799) strain. L-Lysine was purified from the cultivated medium by fixed-bed and simulated moving bed （SMB） chromatography. The separation conditions including pH, eluent concentration and Lys+ and Lys2+ adsorption isotherms were studied in batch adsorption. The column capacity, eluent flow rate and eluent concentration have been studied in fixed-bed chromatography. Maximum purification rate of lysine was obtained as 0.066 g/(g·h) (per gram resin and per hour) at an eluent flow rate of 10 mL/min in fixed-bed chromatography. The results obtained from SMB were 0.11 g/(g·h) for L-lysine purification rate and 96% for L-lysine recovery.     

Sarcorucinine-D Inhibits Cholinesterases and Calcium Channels: Molecular Dynamics Simulation and In Vitro Mechanistic Investigations

Acetylcholinesterase (AChE) inhibitors and calcium channel blockers are considered effective therapies for Alzheimer’s disease. AChE plays an essential role in the nervous system by catalyzing the hydrolysis of the neurotransmitter acetylcholine. In this study, the inhibition of the enzyme AChE by Sarcorucinine-D, a pregnane type steroidal alkaloid, was investigated with experimental enzyme kinetics and molecular dynamics (MD) simulation techniques. Kinetics studies showed that Sarcorucinine-D inhibits two cholinesterases—AChE and butyrylcholinesterase (BChE)—noncompetitively, with K_i values of 103.3 and 4.66 µM, respectively. In silico ligand-protein docking and MD simulation studies conducted on AChE predicted that Sarcorucinine-D interacted via hydrophobic interactions and hydrogen bonds with the residues of the active-site gorge of AChE. Sarcorucinine-D was able to relax contractility concentration-dependently in the intestinal smooth muscles of jejunum obtained from rabbits. Not only was the spontaneous spasmogenicity inhibited, but it also suppressed K⁺-mediated spasmogenicity, indicating an effect via the inhibition of voltage-dependent Ca²⁺ channels. Sarcorucinine-D could be considered a potential lead molecule based on its properties as a noncompetitive AChE inhibitor and a Ca²⁺ channel blocker.     

Tailoring the optical and magnetic properties of La-BaM hexaferrites by Ni substitution

We investigate the impact of Ni insertion on the structural,optical,and magnetic properties of Ba_0.8La_0.2Fe_12-xNi_xO₁₉hexaferrites(Ni substituted La-BaM hexaferrites).Samples were prepared using the conventional co-precipitation method and sintered at 1000℃for 4 hours to assist the crystallization process.An analysis of the structure of the samples was carried out using an x-ray diffraction(XRD)spectrometer.The M-type hexagonal structure of all the samples was confirmed using XRD spectra.The lattice parameters a and c were found to be in the ranges of 5.8925±0.001 nm–5.8952±0.001 nm and 23.2123±0.001 nm–23.2219±0.001 nm,respectively.The M-type hexagonal nature of the prepared samples was also indicated by the presence of corresponding FT-IR bands and Raman modes in the FT-IR and Raman spectra,respectively.EDX results confirmed the successful synthesis of the samples according to the required stoichiometric ratio.A UV-vis spectrometer was used to record the absorption spectra of the prepared samples in the wavelength range of 200 nm–1100 nm.The optical energy bandgap of the samples was found to be in the range of 1.21 eV–3.39 eV.The M–H loops of the samples were measured at room temperature at an applied magnetic field range of 0 kOe–60 kOe.A high saturation magnetization of 99.92 emu/g was recorded in the sample with x=0 at a microwave operating frequency of 22.2 GHz.This high value of saturation magnetization is due to the substitution of La3+ions at the spin-up(12k,2a,and 2b)sites.The Ni substitution is proven to be a potential candidate for the tuning of the optical and magnetic parameters of M-type hexaferrites.Therefore,we suggest that the prepared samples are suitable for use in magneto-optic applications.