Headspace solvent microextraction of trihalomethane compounds into a single drop

Headspace solvent microextraction (HSME) into a single drop is developed for the determination of six trihalomethanes, CH2Cl2, CHCl3, C4H9Cl, CCl4, C2HCl3, and C2Cl4, in aqueous solution. A drop of benzyl alcohol containing bromoform, as an internal standard, is used for extraction. The analytes are extracted by suspending a 3-microL drop directly from the needle of a microsyringe. The needle passes through the septum of a vessel, and the needle tip appears above the surface of the solution. After the prescribed extraction time, the drop is drawn back into the syringe. The syringe is then removed, and its content is injected directly into a gas chromatography column for analysis. The main parameters affecting the HSME process, such as stirring speed, microdrop volume, sample solution temperature, microsyringe needle temperature, sample volume, solution pH, extracting solvent, and ionic strength of the solution, are studied. Also, the linear range and precision of the method are examined.     

New Group 6 metal carbonyl derivatives of 2-(2'(-pyridyl)benzimidazole: synthesis and spectroscopic studies

Reaction of Cr(CO)(6) with 2-(2'-pyridyl)benzimidazole (pbiH) under reduced pressure resulted in the formation of the dinuclear complex [Cr(2)(CO)(6)(pbiH)(2)]. Infra-red (IR) spectroscopy revealed the presence of terminal and bridge Cr-CO bonds. Interaction of M(CO)(6), M=Cr, Mo and W, with pbiH in the presence of 2,2'-bipyridine (bpy) gave the tetracarbonyl complexes [M(CO)(4)(pbiH)].bpy. Spectroscopic studies of the complexes indicated the presence of hydrogen bonding between the bpy nitrogen and the NH group of pbiH. Reactions of M(CO)(6) with pbiH in the presence of PPh(3) gave the tricarbonyl monosubstituted derivatives [M(CO)(3)(PPh(3))(pbiH)]. The spectroscopic studies of the complexes suggested the proposed structures.     

Spectrophotometric determination of hydrazines withperi-naphthindan-2,3,4-trione hydrate

Summary A new micromethod for spectrophotometric determination of hydrazine compounds is described. It is based on a reaction withperi-naphthindan-2,3,4-trione hydrate at pH 2.5 to give a red precipitate of dihydroxy-peri-naphthindenone which is dissolved in methanol and measured at 460 nm. The results obtained show an average recovery of 99.8 %, the precision being ± 1 %.

---

Zusammenfassung Eine neue Mikromethode zur spektrophotometrischen Bestimmung von Hydrazinverbindungen wurde beschrieben. Sie beruht auf der Reaktion mit peri-Naphthindan-2,3,4-trion-hydrat bei pH 2,5, wobei ein roter Niederschlag von Dihydroxy-peri-naphthindenon entsteht, der in Methanol gelöst und bei 460 nm gemessen wird. 99,8% Substanz werden wiedergefunden, die Genauigkeit beträgt ±1%.

     

Potentiometric determination of ultratrace amounts of fluoride enriched by zirconia in a flow system

A satisfactory method was described for separation and preconcentration of ultratrace amounts of fluoride ions enriched by zirconia (ZrO₂) as an inorganic ion exchanger. Fluoride ions can be adsorbed rapidly and selectively on zirconia from an acidic solution (pH 4.8) then reversibly desorbed by increasing pH up to 13. A flow system consisting of a column packed with zirconia impregnated on cellulose fibers and an ion-selective electrode was used for the determination of fluoride. The RSD was found to be 1.6% and the detection limit defined by S/N = 3 was 3 × 10⁻⁹ mol L⁻¹. The interference effects of various ions, such as nitrate, sulfate, halides, alkaline, and alkaline earth ions, which may be found in the environmental water, were studied, and it was found that they were tolerated even at high concentrations. The method was applied to determine fluoride in drinking water, which contains ultratrace amounts of fluoride. The concentration of fluoride was found to be 42 μg L⁻¹, which is confirmed by spiking 2 μmol fluoride to the drinking water with a recovery of 99%. Published in Russian in Zhurnal Analiticheskoi Khimii, 2006, Vol. 61, No. 2, pp. 179–183. The text was submitted by the authors in English.     

Reaction of some coumarin and 4,6-diaryl-2H-pyran derivatives with secondary amines

The reaction of piperidine, morpholine, piperazine or dimethylamine with several coumarins, 3-bromocoumarin, 4,6-diaryl-2H-pyran-2-ones and 3-bromo-4,6-diaryl-2H-thiopyran-2-ones gave o-hydroxycinnamic acid amides, benzofurans, open-chain δ-oxoamides and thiophene derivatives, respectively.     

The effect of the physical and chemical characteristics of activated carbons on the adsorption energy and affinity coefficient of Dubinin equation

The dependency of adsorption energy (E) and affinity coefficient (beta) of Dubinin equations (Dubinin-Radushkevich (DR) or Dubinin-Astakhov (DA)) on surface chemistry and porosity of activated carbons was investigated by analyzing adsorption of nitrogen, benzene, trichloroethylene (TCE), and water vapor by several surface-modified activated carbons and carbon fibers. For all studied nonpolar adsorbates, carbons with smaller average micropores showed higher adsorption energies independent of their surface chemistry. For water vapor, carbons with higher surface polarities showed higher adsorption energies due to specific adsorbate-adsorbent interactions. Adsorption energies increased with decreasing average micropore widths. betaN2,DR for different carbons were observed to vary in the 0.292-0.539 range. Carbons with higher degrees of mesoporosity had higher betaN2,DR values, while no dependency was observed between betaN2,DR and surface chemistry. A comparison of DR and DA cases indicates that: (1) the average value of betaN2,DA is considerably above the classical value of this parameter; and (2) the range of betaN2,DA values were smaller compared to betaN2,DR, despite a wide range of mesoporosity of carbons examined. Obtained beta(TCE,DR) values varied in the 0.952-1.243 range, with an average value of 1.085+/-0.083, independent of surface chemistry or porosity of activated carbons. A similar result was observed for beta(TCE,DA). betaH2O,DR values of different granular and fibrous activated carbons changed in the range of 0.081-0.271. They depended more on the carbon surface chemistry and less on the porosity. A similar result was obtained when DA equation was considered.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.     

Role of Surface Molecular Architecture and Energetics of Hydrogen Bonding Sites in Adsorption of Polymers and Surfactants

Hydrogen bonding is generally thought to be an ubiquitous adsorption mechanism, which often foils selective adsorption schemes. Through investigation of hydrogen bonding energy and its dependence on surface molecular architecture, it may be possible to develop new methodologies to control the adsorption of surfactants and polymeric flocculants, depressants, and dispersants used in particulate processing industries. A model system using St?ber silica spheres and polyethylene oxide, a polymer known for its ability to form hydrogen bonds, was examined. The effect of two different surface treatments of the silica particles, calcination and rehydroxylation, upon the adsorption of two polymer molecular weights was studied. The adsorption behavior was then linked to the respective surface structures via characterization of the surfaces using FTIR, NMR, and Raman techniques. In this paper role of hydrogen bonding sites and surface architecture on adsorption is discussed. Copyright 2000 Academic Press.     

Preparation of a set of selectively protected disaccharides for modular synthesis of heparan sulfate fragments: toward the synthesis of several <Emphasis Type="Italic">O</Emphasis>-sulfonated [β-D-GlcUA-(1→4)-β-D-GlcNAc]OPr types

A concise method for a stereocontrolled synthesis of a set of selectively protected disaccharides is reported. Coupling of the donor 11 onto acceptors 23 and 24, promoted by trimethylsilyl triflate-N-iodosuccinimide (TMSOTf-NIS), generated the disaccharides 25 and 26. Under typical conditions, condensation of the fully protected donor 12 onto acceptors 23 and 24 produced the disaccharides 27 and 28. The building blocks 25–28 were prepared in moderate yields having exclusive β-stereoselectivity. A unique pattern of protecting groups distinguished clearly between positions to be sulfated and functional groups remaining as free hydroxyl groups. Acetyl and/or levulinoyl esters temporarily protected the positions to be sulfated, while benzyl ethers were used for permanent protection. The anomeric positions were protected as allyl ethers, whereas the 4′-positions were masked as p-methoxybenzyl (PMB) ethers. The orthogonality of the PMB and allyl groups can then be used for further elongation of the chain by recurrent deprotection and activation steps. The hydroxyl group, OH-6, of glucosamine moieties was protected as a TBDPS ether to avoid oxidation. A five-step deprotection/sulfonation sequence was applied to the disaccharide 27 to generate the corresponding sulfated [β-D-GlcUA-2-OSO₃Na-(1→4)-β-D-Glc pNAc]-(1→O-Pro) 34.     

An efficient procedure for the synthesis of coumarin derivatives using TiCl4 as catalyst under solvent-free conditions

The ability of titanium(IV) chloride as a catalyst to promote the Pechmann condensation reaction with a range of phenols and β-keto esters is described.The reaction was carried out by addition of TiCl₄ to a mixture of the phenol and the β-keto ester with thorough stirring in the absence of a solvent and represents an improvement on the classical Pechmann conditions. The yields of coumarins obtained via this novel protocol were significantly higher than those using the conventional method and the reaction duration was reduced to a few minutes or even a few seconds.