Measuring energy differences by BEC interferometry on a chip

We investigate the use of a Bose-Einstein condensate trapped on an atom chip for making interferometric measurements of small energy differences. We measure and explain the noise in the energy difference of the split condensates, which derives from statistical noise in the number difference. We also consider systematic errors. A leading effect is the variation of the rf magnetic field in the trap with distance from the wires on the chip surface. This can produce energy differences that are comparable with those due to gravity.     

Cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction and HPLC–DAD analysis of ezetimibe and simvastatin in human plasma and urine

A new cetyl‐alcohol‐reinforced hollow fiber solid/liquid‐phase microextraction (CA–HF–SLPME) followed by high‐performance liquid chromatography–diode array detection (HPLC–DAD) method was developed for simultaneous determination of ezetimibe and simvastatin in human plasma and urine samples. To prepare the CA–HF–SLPME device, the cetyl‐alcohol was immobilized into the pores of a 2.5 cm hollow fiber micro‐tube and the lumen of the micro‐tube was filled with 1‐octanol with the two ends sealed. Afterwards, the prepared device was introduced into 10 mL of the sample solution containing the analytes with agitation. Under optimized conditions, calibration curves plotted in spiked plasma and urine samples were linear in the ranges of 0.363–25/0.49–25 μg L^?1 for ezetimibe/simvastatin and 0.193–25/0.312–25 μg L^?1 for ezetimibe/simvastatin in plasma and urine samples, respectively. The limit of detection was 0.109/0.174 μg L^?1 for ezetimibe/simvastatin in plasma and 0.058/0.093 μg L^?1 for ezetimibe/simvastatin in urine. As a potential application, the proposed method was applied to determine the concentration of selected analytes in patient plasma and urine samples after medication and satisfactory results were achieved. In comparison with reference methods, the CA–HF–SLPME–HPLC–DAD method demonstrates considerable potential in the biopharmaceutical analysis of selected drugs.     

Controlled synthesis of a structurally characterized family of sterically constrained heterocyclic alkoxy-modified titanium alkoxides

The reaction of [Ti(mu-ONep)(ONep)3]2 (ONep = OCH2C(CH3)3) with a series of heterocyclic methanol derivatives [tetrahydrofurfuryl alcohol (H-OTHF), thiophene methanol (H-OTPM), or 2-pyridylcarbinol (H-OPy)-collectively termed H-OR*], led to the isolation of a novel family of OR*-substituted titanium alkoxide precursors. Independent of the initial stoichiometry for the H-OTHF reaction, a monosubstituted, dinuclear species was isolated as [(ONep)3Ti(muc-OTHF)]2 (1). For 1, each Ti was octahedrally (Oh) bound by three terminal ONep ligands, one bidentate bridging OTHF ligand (muc-OTHF), and an oxygen from the other muc-OTHF ligand. For the OTPM derivatives, the product was identified as [(ONep)3Ti(mu-OTPM)]2 (2). For this ligand, the soft S atom does not bind to the Ti but the O atom does act as a bridge between the two trigonal bipyramidal bound Ti metal centers. The OPy system yielded (OPy)2Ti(OR)2 independent of the OR and the stoichiometry used [OR = ONep (3), OCHMe2 (4), OCMe3 (5)]. For 3-5, the two OPy ligands chelate to the Oh-bound Ti metal center with two terminal OR ligands. Compounds 1-5 were fully characterized using a variety of analytical techniques. An initial investigation of the proposed chemical stability of the '(OPy)2Ti' moiety of 3-5 to alcoholysis exchange pathways involving (i) alkyl alcohols, (ii) aryl alcohols, (iii) substituted phenols, (iv) H-OR* derivatives, and (v) silanols proved successful through the isolation of a novel family of structurally characterized (OPy)2Ti(OR')2 (7-24) compounds.     

Fast and accurate reflectivity calculations for shaped core optical fibres

A novel scalar (i.e. paraxial) free space radiation mode method is presented for calculating the normal incidence facet reflectivity of the main guided mode of a step-index optical fibre with generally shaped smooth core. Numerical results are presented and discussed for several cases of the Nth order super-elliptical core shape, including the circular, elliptical, rectangular-type and slab limiting cases.     

Surface diffusion and relaxation of partially adsorbed polymers

We studied by lattice simulation the surface diffusion and relaxation of isolated, self‐avoiding polymers partially adsorbed onto a flat surface. The key parameters describing the system are the number of segments in the chain, N, the adsorption energy of a segment, expressed as a dimensionless surface temperature T_s, and the segmental friction factor on the surface relative to that in the bulk, ζ_s/ζ_b. The simulation data indicate Rouse scaling of the surface diffusion coefficient, D_∥, and in‐plane relaxation time, τ, versus N for all values of T_s and ζ_s/ζ_b studied. A simple application of the Rouse model to a partially adsorbed chain, which ignores fluctuations in adsorbed trains, yields a formula for D_∥ with the correct N‐scaling. It can account for the effects of T_s when ζ_s/ζ_b is finite (≲10), but it fails when ζ_s/ζ_b diverges, predicting no surface diffusion at all, whereas simulations indicate finite surface mobilities facilitated by a caterpillar‐like motion. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1146–1154, 2000     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.     

Enantioselective determination of modafinil in pharmaceutical formulations by capillary electrophoresis, and computational calculation of their inclusion complexes

A fast capillary electrophoretic method is described for the separation and determination of the enantiomers of the novel wake-promoting agent, modafinil. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, buffer concentration, voltage and temperature. Good chiral separation of the racemic mixture was achieved in less than 5 min with resolution factor Rs?=?2.51, using a bare fused-silica capillary and a background electrolyte (BGE) of 25 mM H₃PO₄?1 M tris solution; pH 8.0; containing 30 mg mL^?1 of sulfated-β-cyclodextrin (S-β-CD). The separation was carried out in normal polarity mode at 25 ^?C, 18 kV and using hydrostatic injection. Acceptable validation criteria for selectivity, linearity, precision, and accuracy were included. The developed method was successfully applied to the assay of enantiomers of modafinil in pharmaceutical formulations. The computational calculations for the enantiomeric inclusion complexes rationalized the reasons for the different migration times between the modafinil enantiomers.     

Optical waveguides in porous silicon pre-patterned by localised nitrogen implantation.

FIPOS technology forms islands of silicon isolated from a silicon substrate by (oxidised) porous silicon. The larger refractive index of the silicon islands suggests their use as optical waveguides. Sets of these silicon islands have been fabricated and the anticipated waveguiding has been observed at wavelengths of 1.15 and 1.3 μm in the silicon islands. However, the dominant waveguiding in these FIPOS structures is observed in the porous silicon between the silicon islands, close to the sample surface. A simple dynamic model of the anodisation process has been developed to explain the origin of this unexpected waveguiding.