2-Propylamino-5-[4-(2-hydroxy-3,5-dichlorobenzylideneamino) phenyl]-1,3,4-thiadiazole: X-ray and DFT-calculated structures

2-Propylamino-5-[4-(2-hydroxy-3,5-dichlorobenzylideneamino) phenyl]-1,3,4-thiadiazole, formulated as C₁₈H₁₆Cl₂N₄OS (I), was synthesized. The crystal and molecular structure of (I) have been determined by ¹H-NMR, IR, and X-ray single crystal diffraction. The compound (I) crystallizes in the monoclinic, space group P2(1)/c with unit cell parameters a = 9.0576(2) Å, b = 24.3382(8) Å, c = 9.0585(2) Å, M _r = 407.31, V = 1851.13(9) Å³, Z = 4, R ₁ = 0.036, and wR ₂ = 0.096. Molecular geometry from X-ray experiment of (I) in the ground state has been compared using the density functional method (B3LYP) with 6-31G(d) basis set. To determine conformational flexibility, molecular energy profile of (I) was obtained by semi-empirical (PM3) calculations with respect to selected degree of torsional freedom, which was varied from ?180° to +180° in steps of 10°. The results are indicative that the Schiff base, which contains a thiadiazole ring, prefers to be in E-configuration. In addition, molecular electrostatic potential, frontier molecular orbitals, and natural bond orbitals analysis were performed by the B3LYP/6-31G(d) method.     

Spectrofluorimetric determination of nateglinide in pure and pharmaceutical preparations through derivatization with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole

A sensitive method was developed for the determination of nateglinide in pure and pharmaceutical preparations. The proposed method is based on the derivatization reaction between nateglinide and 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole in borate buffer of pH 10. Fluorescent intensity of derivative was measured at 537 nm using an excitation wavelength of 464 nm. The described method was validated and the analytical parameters of linearity, limit of detection, limit of quantification, accuracy, precision (intra- and inter-day) and recovery were evaluated. The assay was linear over the concentration range of 50–500 ng/mL. The proposed method was applied to study of nateglinide in pure and pharmaceutical preparations.     

The Infrared and Raman Spectra of 4-Phenylpyridine and Its Hofmann Type Complexes.

Abstract

The Infrared and Raman spectra of 4-Phenylpyridine are reported for the first time in the 4000-400cm^?1 range. Vibrational assignments have been made for fundamental modes on the basis of frequency shifts of coordinated legend, infrared and Raman band contours and comparisons with the assignments for related molecules. The infrared spectra of M (4-Phenylpyridine) Ni(CN)₄ complexes (M=Mn, Ni or Cd) are reported. Their structure consists of polymeric layers of [M-Ni(CN)₄]_∞ with the 4-phenylpyridine molecules bound to metal (M), similar to the structure found in Hoffmann type host complexes.     

Synthesis and in vitro antioxidant evaluation of new bis(α-aminoalkyl)phosphinic acid derivatives

Diamines were added to arylaldehydes in ethanol, which resulted in corresponding diimines. Novel bis-1-aminophosphinic acid compounds were synthesized through the interaction of diimines and hypophosphorous acid. The new compounds were characterized by elemental analyses, FT-IR and ¹H, ¹³C and ³¹P NMR techniques. The in vitro antioxidant activity of the newly synthesized compounds were measured and found to exhibit significantly higher antioxidant activity than the standard.     

UV stabilisation of powder clear coats

Powder coatings are gaining importance in exterior applications such as automotive and architectural finishes. The use of additives in powder coating formulations enhance the durability of the coating by reducing the effects of harmful UV light and providing high temperature stability during processing and curing. Customers' increased demands for better retention of aesthetical and mechanical properties has prompted the development of new additives dedicated to powder coatings. This paper presents an overview of the performance of light stabilizers used in powder coatings.     

A Kinetic Investigation of Chromium

A kinetic investigation was performed with an ion exchange resin for chromium. A chelating cation exchange resin (Amberlite IRC 718) was used for removal and recovery of chromium. The effect of concentration, resin amount, particle size and stirring speed on kinetics were investigated. The metal concentration range studied was between 5 to 160 mg L^–1, the resin amount range was between 5 to 20 mg, the particle size range was between 0.35 to 1.8 mm and the stirring speed range was between 1000 to 3500 rpm.Kinetic studies were done using a Kressman-Kitchener stirrer reactor system and the results were compared with existing kinetic models. Two models; Nernst-Plank film diffusion control model (fdc) and solid phase diffusion control model (pdc) were identified and the dependence of the rate on parameters, such as solution concentration, particle size, resin amount, stirring speed, etc., was examined for each of them. As a result, interpretation of these data showed that the system is probably controlled both film and particle diffusion.     

Development of an HPLC method for the determination of mexiletine in human plasma and urine by solid-phase extraction

A sensitive and specific high-performance liquid chromatography (HPLC) method has been developed and validated for the quantification of mexiletine (MEX) in human plasma and urine. It uses solid-phase extraction (SPE) followed by an automated reversed-phase HPLC with a pre-column derivatization with 4-chloro-7-nitrobenzofurazan (NBD-CI) and UV-vis Absorbance detection. The process was set as: the UV-vis Absorbance wavelength was set at 458 nm. Chromatographic separation was performed on a Phenomenex-C₁₈ Column (Aqua, 150 mm × 4.6 mm i.d. with 5 μm particle size) with the mobile phase consisting of acetonitrile and water (80:20, v/v), and the flow rate was set at 1.0 mL min⁻¹. Calibration of the overall analytical procedure gave a linear signal (r > 0.9998) over a MEX concentration range of 0.2-2.0 μg mL⁻¹ in human plasma and urine. The detection limit in plasma and urine was 0.1 μg mL⁻¹. Intra- and inter-day precision of the assay at three concentrations within this range were 0.31-2.50%. The high specificity and sensitivity have been achieved by this fast method (total run-time <6 min). The method has been successfully validated in human plasma and urine and it has been shown to be precise, accurate and reliable.     

Heavy metal removal with magnetic coffee grain

The presence of heavy metals in environmental waters having an important place in the industrial waste is a major threat to viability. Heavy metals are transported to humans through the ecological cycle, damaging many tissues and organs. In recent years, agricultural and food waste can be used to remove heavy metals. At the present study, magnetically modified coffee grains which are alternative to conventional particle systems were prepared and heavy metal removal performances were investigated. The coffee grains used were magnetically modified by contact with water-based magnetic fluid. Magnetically modified coffee grains were characterized by scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) surface area analysis and electron spin resonance (ESR). Adsorption studies are made with four different heavy metal ions, namely Cu(II), Pb(II), Cd(II) and Zn(II). Adsorption isotherms were determined and heavy metal removal performance of magnetic coffee grains were investigated from synthetic waste water.     

Ab initio and density functional computations of the vibrational spectrum, molecular geometry and some molecular properties of the antidepressant drug sertraline (Zoloft) hydrochloride

Sertraline hydrochloride is a highly potent and selective inhibitor of serotonin (5HT). It is a basic compound of pharmaceutical application for antidepressant treatment (brand name: Zoloft). Ab initio and density functional computations of the vibrational (IR) spectrum, the molecular geometry, the atomic charges and polarizabilities were carried out. The infrared spectrum of sertraline is recorded in the solid state. The observed IR wave numbers were analysed in light of the computed vibrational spectrum. On the basis of the comparison between calculated and experimental results and the comparison with related molecules, assignments of fundamental vibrational modes are examined. The X-ray geometry and experimental frequencies are compared with the results of our theoretical calculations.     

Highly sensitive determination and validation of gabapentin in pharmaceutical preparations by HPLC with 4-fluoro-7-nitrobenzofurazan derivatization and fluorescence detection

A sensitive HPLC method with pre-column fluorescence derivatization using 4-Fluoro-7-Nitrobenzofurazan (NBD-F) has been developed for the determination of gabapentin in pharmaceutical preparations. The method is based on the derivatization of gabapentin with (NBD-F) in borate buffer of pH 9.5 to yield a yellow, fluorescent product. The HPLC separation was achieved on a Inertsil C(18) column (250 mm × 4.6 mm) using a mobile phase of methanol water (80:20, v/v) solvent system at 1.2 mL/min flow rate. Mexiletine was used as the internal standard. The fluorometric detector was operated at 458 nm (excitation) and 521 nm (emission). The assay was linear over the concentration range of 5 50 ng/mL. The method was validated for specificity, linearity, limit of detection, limit of quantification, precision, accuracy, robustness. Moreover, the method was found to be sensitive with a low limit of detection (0.85 ng/mL) and limit of quantitation (2.55 ng/mL). The results of the developed procedure for gabapentin content in capsules were compared with those by the official method (USP 32). Statistical analysis by t- and F-tests, showed no significant difference at 95 confidence level between the two proposed methods.