Control of Enzymatic Degradation of Microbial Polyesters by Plasma Modification

The rate of enzymatic degradation of surface‐modified microbial polyesters, poly[(R)‐3‐hydroxybutyrate] and poly[(R)‐3‐hydroxybutyrate‐co‐3‐hydroxyvalerate], was studied. The plasma treatments were carried out in a CF₃H or O₂ environment. It was found that the CF₃H plasma‐treated polyesters exhibited significant retardation of enzymatic erosion because of the surface fluorocarbon groups induced by CF₃H plasma. These surface fluorocarbon groups act as retardants on enzymatic degradation due to increased hydrophobicity and of the inactivity of enzymes. However, the increased surface hydrophilicity of polyesters induced by O₂ plasma results in no significant acceleration of the enzymatic erosion, which may be due to the thin modified layer.

Weight loss profiles of P(3HB) film exposed to CF₃H plasma as a function of plasma exposure time.     

Pretreatment of wastepaper and pulp mill sludge by aqueous ammonia and hydrogen peroxide

Pretreatment of two different softwood-based lignocellulosic wastes (newsprint and Kraft pulp mill sludge) was investigated. Pretreatment was done by aqueous ammonia and hydrogen peroxide (H₂O₂), two delignifying reagents that are environmentally benign. Three different treatment schemes were employed: aqueous ammonia alone (ammonia recycled percolation [ARP]), mixed stream of aqueous ammonia and H₂O₂ and successive treatment with H₂O₂ and aqueous ammonia. In all cases there was a substantial degree of delignification ranging from 30 to 50%. About half of the hemicellulose sugars were dissolved into the process effluent. Retention of cellulose after pretreatment varied from 85 to 100% for newspaper feedstock and from 77 to 85% for the pulp mill sludge. After treatment with aqueous ammonia alone (ARP), the digestibility of newspaper and the pulp mill sludge was improved only by 5% (from 40 to 45% for the former and from 68 to 73% for the latter), despite a substantial degree of delignification occurring after the ARP process. The lign in content thus did not correlate with the digestibility for these substrates. Simultaneous treatment with H₂O₂ and aqueous ammonia did not bring about any significant improvement in the digestibility over that of the ARP. A succcessive treatment by H₂O₂ and ARP showed the most promise because it improved the digestibility of the newspaper from 41 to 75%, a level comparable to that of α-cellulose.     

Aggregation‐Induced Electrochemiluminescence of Carboranyl Carbazoles in Aqueous Media

The aggregation‐induced electrochemiluminescence (AIECL) of carboranyl carbazoles in aqueous media was investigated for the first time. Quantum yields, morphologies, and particle sizes were observed to determine the electrochemiluminescence (ECL) performance of these aggregated organic dots (ODs). All compounds exhibit much higher ECL stability and intensity than the carborane‐free compound, demonstrating the essential role of the carboranyl motif. Moreover, the results of cyclic voltammetry (CV) suggest that oxidation/reduction reactions take place at the carboranyl motif. The excited states of ODs were proposed to be generated by the mechanism of surface state transitions. More importantly, these compounds show a reductive–oxidative mechanism in contrast to other organic materials that show oxidative–reductive mechanisms. Our experiments and data have established the relation between AIE organic structures and ECL properties that has a strong potential for biological and diagnostic applications.     

Effect of aromatic substitution on the cure reaction and network properties of anhydride cured triphenyl ether tetraglycidyl epoxy resins

A systemic study of the impact of aromatic substitution on the reaction rate and network properties of the isomers of a tetraglycidylaniline triphenyl ether epoxy resin cured with anhydride hardeners is presented here. The epoxy resins synthesized in this work were based upon N,N,N,N‐tetraglycidyl bis(aminophenoxy)benzene (TGAPB), where the glycidyl aniline and ether groups change from being all meta (133 TGAPB), to meta and para (134 TGAPB), and finally to an all para substituted epoxy resin (144 TGAPB). Increasing para substitution increased reaction rate, promoted the onset of vitrification and increased epoxide conversion. Thermal properties such as glass transition temperatures (T_g) and coefficients of thermal expansion (CTE) both increased consistently with increasing para substitution, although thermal stability as measured via thermogravimetric analysis decreased. Mechanical properties also varied systematically with flexural strength and ductility increasing with increased para substitution, while the modulus decreased. Indeed, the ductility almost doubled, as measured by the work of fracture and displacement at failure highlighting the importance of substitution on properties.     

Electrochemical Conversion of CO2 to Syngas with Controllable CO/H2 Ratios over Co and Ni Single‐Atom Catalysts

The electrochemical CO₂ reduction reaction (CO₂RR) to yield synthesis gas (syngas, CO and H₂) has been considered as a promising method to realize the net reduction in CO₂ emission. However, it is challenging to balance the CO₂RR activity and the CO/H₂ ratio. To address this issue, nitrogen‐doped carbon supported single‐atom catalysts are designed as electrocatalysts to produce syngas from CO₂RR. While Co and Ni single‐atom catalysts are selective in producing H₂ and CO, respectively, electrocatalysts containing both Co and Ni show a high syngas evolution (total current >74 mA cm^?2) with CO/H₂ ratios (0.23–2.26) that are suitable for typical downstream thermochemical reactions. Density functional theory calculations provide insights into the key intermediates on Co and Ni single‐atom configurations for the H₂ and CO evolution. The results present a useful case on how non‐precious transition metal species can maintain high CO₂RR activity with tunable CO/H₂ ratios.     

Electrochemical Detection of Lead Ion Based on a Peptide Modified Electrode

A novel biosensor harnessing a peptide layer which has specific affinity to lead ion proved to be highly effective for electrochemical analysis of lead ions. The peptide modified electrode was used for the electrochemical analysis of various trace metal ions by square wave voltammetry. Compared to the other ions investigated, the peptide modified electrode was found to be highly selective to Pb²⁺ in the range of 50–700 nM. Furthermore, the biosensor exhibited a high reusability and good spike recovery in the tap water containing various concentration of Pb²⁺.     

Heterostructured composite of NiFe-LDH nanosheets with Ti4O7 for oxygen evolution reaction

Developing oxygen evolution reaction (OER) electrocatalyst based on earth-abundant materials holds great promise for ascertaining water-splitting to surmount its deprived kinetics. In this regard, NiFe-LDH (layered double hydroxide) receives considerable attention owing to their layered structure. However, they still suffer from poor electronic conductivity and structural stability. We combined NiFe-LDH nanosheets with Magnéli phase Ti₄O₇ into a heterostructured composite. A series of analyses reveal that decorating Ti₄O₇ facilitates charge transfer to enhance the conductivity of NiFe-LDH-Ti₄O₇. During electrochemical measurement, Ni²⁺ is transformed to metastable Ni³⁺ (Ni (OH)→ NiOOH) before the OER onset potential. Thus, the presence of Ni³⁺ as the main active sites could improve the chemisorption of OH^? to facilitate OER. As a result, the NiFe-LDH-Ti₄O₇ catalyst delivers as low as onset potential (1.43 V). Combining the holey structure (NiFe-LDH and Ti₄O₇) and the defect engineering generated on NiFe-LDH-Ti₄O₇ as a synergistic effect improves the OER performance. The inclusion of Ti₄O₇ in the composite leads to more vacancy sites, as evidenced by the extended X-ray absorption fine structure (EXAFS) analysis. The obtained defective structure with a low coordination environment would improve the electronic conductivity and facilitate the adsorption process of H₂O onto metal cations, thereby increasing the intrinsic catalytic activity of NiOOH. The strong coupling of NiFe-LDH and Ti₄O₇ also increases the stability, and the heterostructured composite helps maintain the structural robustness of the LDH.     

A Theoretical Perspective to Study the Optical Properties of Tetrafluoroborates

In this study, a series of tetrafluoroborates with non-π-conjugated [BF₄] tetrahedra are investigated systematically by first-principles calculations. Theoretical studies demonstrate that tetrafluoroborates with alkali and/or alkaline-earth metals are more favorable for deep-ultraviolet transmission and are comparable to the classical deep-ultraviolet (deep-UV) material, MgF₂. Furthermore, bandgap decrease with the increasing of ionic radii in alkali and/or alkaline-earth metals. Introducing highly polarizable cations with d₁₀-configuration or cations with lone pair electrons into the structure will decrease the bandgaps. The birefringence and second harmonic generation effects are not large enough in tetrafluoroborates because polarizability anisotropy and hyperpolarizability in non-π-conjugated [BF₄] tetrahedra are much smaller than those in π-conjugated groups. However, the second harmonic generation effect for [BF₄] tetrahedra has a higher contribution in comparison with that due to birefringence. To effectively synthesize the borate fluorides or fluorooxoborates in the deep-UV region, raw materials with B−F bonds are preferred.