Rotational state selection of a CH3I+ ion beam using vacuum ultraviolet-mass-analyzed threshold ionization spectroscopy: characterization using photodissociation spectroscopy

The A(2)A(1)<--X(2)E(3/2) transition of CH(3)I(+) was investigated by photodissociation (PD) of the cation generated by one-photon mass-analyzed threshold ionization (MATI). Compared to the PD spectrum obtained by excitation of the cation in the main 0-0 band in the MATI spectrum, those obtained by excitation of the cations in the satellite structures showed substantially simplified rotational structures for nondegenerate vibronic bands. Spectral simplification occurred because each satellite consisted mostly of cations with one K quantum number. Spectroscopic constants in the ground vibronic state and in the 2(1)3(5), 2(1)3(8), 3(9), and 3(13) nondegenerate vibrational states in A(2)A(1) were determined via spectral fitting. Also, those in the 2(1)3(n)6(1) (n=1?) degenerate state, which had been reported previously, was improved. The K quantum number in each satellite determined by the present high resolution study was compatible with the prediction by the symmetry selection rule for photoionization. That is, the K quantum number of the ion core in high Rydberg states accessed by one-photon excitation was found to be conserved upon pulsed field ionization. This work demonstrates generation of mass-selected, vibronically selected, and K-selected ion beam by one-photon MATI.     

Unidirectional Pt silicide nanowires grown on vicinal Si(100)

We investigated the structure and electronic properties of unidirectional Pt(2)Si nanowires (NWs) grown on a Si(100)-2 degrees off surface. We found that Pt(2)Si NWs were formed along the step edges of the Si(100)-2 degrees off surface with c(4x6) reconstructions that occurred on the terraces of Si(100) using scanning tunneling microscopy and the structure of formed NWs was found to be Pt(2)Si by core-level photoemission spectroscopy. Moreover, we confirmed that the electronic band structures of the NWs along the NW direction are different from those perpendicular to the NWs and the surface state induced by the Pt(2)Si NWs was observed with a small density of state using the angle-resolved photoemission spectra.     

Mechanistic studies on the Cu-catalyzed three-component reactions of sulfonyl azides, 1-alkynes and amines, alcohols, or water: dichotomy via a common pathway

Combined analyses of experimental and computational studies on the Cu-catalyzed three-component reactions of sulfonyl azides, terminal alkynes and amines, alcohols, or water are described. A range of experimental data including product distribution ratio and trapping of key intermediates support the validity of a common pathway in the reaction of 1-alkynes and two distinct types of azides substituted with sulfonyl and aryl(alkyl) groups. The proposal that bimolecular cycloaddition reactions take place initially between triple bonds and sulfonyl azides to give N-sulfonyl triazolyl copper intermediates was verified by a trapping experiment. The main reason for the different outcome from reactions between sulfonyl and aryl(alkyl) azides is attributed to the lability of the N-sulfonyl triazolyl copper intermediates. These species are readily rearranged to another key intermediate, ketenimine, into which various nucleophiles such as amines, alcohols, or water add to afford the three-component coupled products: amidines, imidates, or amides, respectively. In addition, the proposed mechanistic framework is in good agreement with the obtained kinetics and competition studies. A computational study (B3LYP/LACV3P*+) was also performed confirming the proposed mechanistic pathway that the triazolyl copper intermediate plays as a branching point to dictate the product distribution.     

Unusual deoxygenation and reactivity studies related to O6-(benzotriazol-1-yl)inosine derivatives

New and unusual developments related to the chemistry of O6-(benzotriazol-1-yl)inosine derivatives are reported. First, a simple, scalable method for their syntheses via the use of PPh3/I2/HOBt has been developed and has been mechanistically investigated by 31P(1H) NMR. Studies were then conducted into a unique oxygen transfer reaction between O6-(benzotriazol-1-yl)inosine nucleosides and bis(pinacolato)diboron (pinB-Bpin) leading to the formation of C-6 (benzotriazol-1-yl)purine nucleoside derivatives and pinB-O-Bpin. This reaction has been investigated by 11B(1H) NMR and compared to pinB-O-Bpin obtained by oxidation of pinB-Bpin. The structures of the C-6 (benzotriazol-1-yl)purine nucleosides have been unequivocally established via Pd-mediated C-N bond formation between bromo purine nucleosides and 1H-benzotriazole. Finally, short and extremely simple synthesis of 1,N6-ethano- and 1,N6-propano-2'-deoxyadenosine are reported in order to demonstrate the synthetic versatility of the O6-(benzotriazol-1-yl)inosine nucleoside derivatives for the assembly of relatively complex compounds.     

A novel polymer supported approach to nucleoside modification

Polymer-supported O(6)-(benzotriazol-1-yl)inosine derivatives (Pol-I and Pol-dI) have been synthesized reasonably effectively via reaction of nucleoside phosphonium salts with polymer-linked HOBt (Pol-HOBt). In constast to solution chemistry, use of polymer-supported BOP (Pol-BOP) did not lead to efficient nucleoside loading. Presence of the nucleosides on the support could be readily detected by MAS NMR. Exposure of the polymer-supported nucleosides, Pol-I and Pol-dI, to alcohol, phenol, thiol and amine nucleophiles caused cleavage from the support leading directly to the C-6 modified nucleoside analogues. To our knowledge, these are the first examples of the application of such technology for nucleoside modification. Where possible, results of reactions with the polymer-supported nucleosides are compared to those from solution chemistry, providing insight into the differences between the two techniques. These new polymer-supported nucleosides can be conveniently utilized for diversity-oriented synthesis.     

Influence of electrolyte temperature on pure titanium modified by electrochemical treatment for implant

This study examined the effect of electrolyte temperature on the surface characteristics of anodized pure titanium in DL ‐α‐glycerophosphate (DL ‐α‐GP) and calcium acetate (CA). The anodic oxide films contained a large proportion of anatase with some rutile. The relative intensity of the anatase peaks and the surface roughness increased with increasing electrolyte temperature. As the electrolyte temperature was increased, the pore size increased to 1–4 µm, and the apatite crystals became coarser and denser. The amount of calcium and phosphate adsorbed increased with increasing electrolyte temperature. The anodizing voltage reached the onset of constant voltage mode faster with decreasing electrolyte temperature. A higher voltage is essential for the electrolyte at lower temperature to reach the constant voltage mode during this initial period. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface characteristics of AZ91D alloy anodized with various conditions

Anodic oxidation of an AZ91D magnesium alloy was carried out in an attempt to increase the corrosion resistance. The alloy was placed in an electrolyte containing 0.1 M sodium silicate (Na₂SiO₃), 2.0 M sodium hydroxide (NaOH) and 0.1 M sodium phosphate (Na₃PO₄), and treated with a current density of 100–400 mA/cm² for 1 to 4 min. After the anodic oxidation treatment, the surface characteristics were analyzed by SEM, X‐ray diffraction (XRD) and a surface roughness tester. The corrosion resistance was determined by measuring the corrosion potential and corrosion current density using potentiodynamic polarization in a 3.5 wt% NaCl electrolyte solution. Although the anodic oxidation treatment with the base electrolyte resulted in an arrival voltage ranging from 60 to 70 V, the addition of silicate tended to reduce this arrival voltage by approximately 10–20 V and decrease the critical voltage required for the formation of a porous oxide film. The pore size and film thickness increased with increasing applied current and treatment time. The addition of silicate to the electrolyte resulted in films with a homogeneous pore size and a film thickness increasing with the increasing applied current and treatment time. XRD showed the formation of a new MgO and Mg₂SiO₄ phase. The formation of Mg₂SiO₄ was attributed to the presence of SiO₄^4? in the film. After the addition of silicate, the corrosion potential increased and corrosion current decreased, resulting in improved corrosion resistance. Copyright © 2008 John Wiley & Sons, Ltd.     

On the polynomial representation for the number of partitions with fixed length

In this paper, it is shown that the number of partitions of a nonnegative integer with parts can be described by a set of polynomials of degree in , where denotes the least common multiple of the integers and denotes the quotient of when divided by . In addition, the sets of the polynomials are obtained and shown explicitly for and .

     

Passive mode locking of Yb:KLuW using a single-walled carbon nanotube saturable absorber

Mode locking of an Yb-doped bulk laser in the 1 microm spectral range using a single-walled carbon nanotube saturable absorber (SWCNT-SA) is demonstrated for the first time, to our knowledge. Passive mode locking of an Yb:KLuW laser resulted in nearly transform-limited pulses as short as 115 fs at 1048 nm. In addition, the nonlinear response of the SWCNT-SA was measured, yielding a modulation depth of 0.25% and a relaxation time of 750 fs.     

Two-dimensional nanopatterning by PDMS relief structures of polymeric colloidal crystals

A new constructive method of fabricating a nanoparticle self-assembly on the patterned surface of a poly(dimethylsiloxane) (PDMS) relief nanostructure was demonstrated. Patterned PDMS templates with close-packed microwells were fabricated by molding against a self-assembled monolayer of polystyrene spheres. Alkanethiol-functionalized gold nanoparticles with an average particle size of 2.5 nm were selectively deposited onto a hydrophobic self-assembled monolayer printed on the substrate by the micro-contact printing (μCP) of the prepared PDMS microwell, in which the patterned gold nanoparticles consisted of close-packed hexagons with an average diameter of 370 nm. In addition, two-dimensional colloidal crystals derived from PMMA microspheres with a diameter of 380 nm and a negative surface charge were successfully formed on the hemispherical microwells by electrostatic force using positively charged PAH-coated PDMS as a template to produce multidimensional nanostructures.