Non-linear modeling and dynamic analysis of hydraulic control valve; effect of a decision factor between experiment and numerical simulation

Numerical problems that are usually ignored in the dynamic analysis of hydraulic control valves are described, and an analysis of the effects of such problems on the numerical modeling is provided. Previous studies have ignored the effects of changes in the flow coefficient in the orifice, the solenoid force along the spool movement in the valve and an ascending tendency of pressure during reach to the steady state. To eliminate these problems, it was studied a method to substantiate the non-linearity of the pressure loss caused by passing between the orifice and port as well as that caused by interaction with the solenoid. Moreover, the movement of the spool and spring is expressed using the time-delay-element (TDE). The proposed numerical model has been used in the Bond graphs method of a hydraulic control valve and the simulation results have been shown to be accurate. It is known that differences between simulated and experimental results can have a considerable impact on the function of actual systems. The contribution of each parameter is measured separately for the transient state and steady state. Analysis standard observed the first peak value, pressure increase to the steady state and the settling time in the response results.     

Regulation of glutamatergic signalling by PACAP in the mammalian suprachiasmatic nucleus

Background  

Previous studies indicate that light information reaches the suprachiasmatic nucleus (SCN) through a subpopulation of retinal ganglion cells that contain both glutamate and pituitary adenylyl cyclase activating peptide (PACAP). While the role of glutamate in this pathway has been well studied, the involvement of PACAP and its receptors are only beginning to be understood. Speculating that PACAP may function to modulate how neurons in the suprachiasmatic nucleus respond to glutamate, we used electrophysiological and calcium imaging tools to examine possible cellular interactions between these co-transmitters.     

Misalignment tolerance analysis and fabrication for highly efficient parallel optical-electrical convertor module

A compact, highly efficient, and passively assembled parallel optical-electrical convertor module (POECM) for active optical cable application is proposed. This paper presents our POECM structure, optical design simulation results, fabrication process, and data transmission test results, in sequence. The POECM has a compact size of \(18.5\hbox {mm} \times 10\hbox {mm} \times 2.8\hbox {mm}\) . We confirm a data rate of total throughput at 21.6 Gbps ( \(5.4\hbox {Gbps} \times 4\) channels) with a bit error rate of less than \(10^{-12}\) .     

New device architecture of a thermoelectric energy conversion for recovering low-quality heat

Low-quality heat is generally discarded for economic reasons; a low-cost energy conversion device considering price per watt, $/W, is required to recover this waste heat. Thin-film based thermoelectric devices could be a superior alternative for this purpose, based on their low material consumption; however, power generated in conventional thermoelectric device architecture is negligible due to the small temperature drop across the thin film. To overcome this challenge, we propose new device architecture, and demonstrate approximately 60 Kelvin temperature differences using a thick polymer nanocomposite. The temperature differences were achieved by separating the thermal path from the electrical path; whereas in conventional device architecture, both electrical charges and thermal energy share same path. We also applied this device to harvest body heat and confirmed its usability as an energy conversion device for recovering low-quality heat.     

Exchange coupled magnetic nanocomposites of Sm(Co1−xFex)5 / Fe3O4 with core/shell structure

Magnetic nanocomposites of Sm(Co_1−xFe_x)₅/Fe₃O₄ (x≈0.1) with the core/shell type structure were successfully fabricated using a two-step polyol process, where as-prepared SmCo_5(1−x) nanoparticles were used as seeds for the ferrite coating. The core/shell composites are quite stable in air and show a typical hysteric behavior of single component, yielding an enhanced coercivity of 2.2 kOe with a saturated magnetization of 130 emu/g at 5 T. The magnetization data clearly reveal the presence of effective exchange coupling between the hard-magnetic Sm(Co_1−xFe_x)₅ core and soft-magnetic Fe₃O₄ shell, suggestive of a single-phase structure rather than a distinctive two-phase one.     

One-dimensional structures of Bi2O3 synthesized via metalorganic chemical vapor deposition process

We have demonstrated the synthesis of one-dimensional (1D) structures of bismuth oxide (Bi₂O₃) by a reaction of a trimethylbismuth (TMBi) and oxygen (O₂) mixture at 450 °C. Scanning electron microscopy showed that the product consisted of 1D materials with width or diameters less than 1 μm and lengths up to several tens of micrometers. The X-ray energy dispersive spectroscopy revealed that the materials contained elements of Bi and O. The results of X-ray diffraction and selected area electron diffraction pattern indicated that the obtained Bi₂O₃ were crystalline with monoclinic structure.