Decarbopalladation of pi-allylpalladium intermediates formed from palladium-catalyzed arylations of 3-allen-1-ols

[reaction: see text] Unusual palladium-catalyzed arylative fragmentations of acyclic 3-allen-1-ols were observed. Oxidative addition of Pd(0) to aryl halides would form the arylpalladium halides, which added to the central carbon of allenes via carbopalladation to form the pi-allylpalladium intermediates. The pi-allylpalladium intermediates would be reductively eliminated via carbon-carbon cleavage to give the arylated dienes and the alpha-hydroxyalkylpalladium intermediates, which were further reductively eliminated to the corresponding aldehydes.     

Ionizing radiation induces blockade of c-Jun N-terminal kinase-dependent cell death pathway in a manner correlated with p21(Cip/WAF1) induction in primary cultured normal human fibroblasts

During radiotherapy of cancer, neighboring normal cells may receive sub-lethal doses of radiation. To investigate whether such low levels of radiation modulate normal cell responses to death stimuli, primary cultured human fibroblasts were exposed to various doses of gamma-rays. Analysis of cell viability using an exclusion dye propidium iodide revealed that the irradiation up to 10 Gy killed the fibroblasts only to a minimal extent. In contrast, the cells efficiently lost their viability when exposed to 0.5-0.65 mM H(2)O(2). This type of cell death was accompanied by JNK activation, and was reversed by the use of a JNK-specific inhibitor SP600125. Interestingly, H(2)O(2) failed to kill the fibroblasts when these cells were pre-irradiated, 24 h before H(2)O(2) treatment, with 0.25-0.5 Gy of gamma-rays. These cytoprotective doses of gamma-rays did not enhance cellular capacity to degrade H(2)O(2), but elevated cellular levels of p21(Cip/WAF1), a p53 target that can suppress H(2)O(2)-induced cell death by blocking JNK activation. Consistently, H(2)O(2)-induced JNK activation was dramatically suppressed in the pre-irradiated cells. The overall data suggests that ionizing radiation can impart normal fibroblasts with a survival advantage against oxidative stress by blocking the process leading to JNK activation.     

Theoretical studies on the mechanism of acid-promoted hydrolysis of N-formylaziridine in comparison with formamide

[reaction: see text] We present an ab initio study of the acid-promoted hydrolysis reaction mechanism of N-formylaziridine in comparison with formamide. Since the rate of amide hydrolysis reactions depends on the formation of the tetrahedral intermediate, we focused our attention mainly on the reactant complex, the tetrahedral intermediate, and the transition state connecting these two stationary points. Geometries were optimized using the density functional theory, and the energetics were refined using ab initio theory including electron correlation. Solvent effects were investigated by using polarizable continuum method calculations. The proton-transfer reaction between the O-protonated and N-protonated amides was investigated. In acidic media, despite that the N-protonated species is more stable than the O-protonated one, it is predicted that both N-protonated and O-protonated pathways compete in the hydrolysis reaction of N-formylaziridine.     

Simple mimetics of a nuclear localization signal (NLS)

[reaction: see text] Molecular modeling was used to design mimetics of the HIV-1 matrix protein nuclear localization signal (NLS) in which a scaffold of two resorcinol units joined by a diamide linker presents 3-aminopropyl ethers in place of lysine side chains. Prospective mimetics with linkers of 6, 8, 10, or 12 atoms were synthesized and compared in a competition assay for binding to the nuclear import receptor subunit karyopherin alpha, showing the 10-atom linker to be best and shorter ones ineffective.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.     

Two organometallic fragments inclusioned in a 1,3-alternate calix[4]arene tetraphosphane: evidence for transition metal-arene interaction through the cavity

The preparation of an 1,3-alternate calix[4]arene tetraphosphane ligand, 25,26,27,28-tetrakis{2-(diphenylphosphino)ethoxy}calix[4]arene (4), is described. Ligand 4 is obtained in four steps in 17% overall yield. Reaction of 4 with AgBF4 produced the encapsulated two silver complex [Ag2{(P,P,P,P)-tetraphencalix[4]arene}](BF4)2. The solid-state structure shows that the encapsulated silver undergoes a substantial pi-interaction by two opposite arene rings. Rhodation of 4 employing [Rh(cot)2]BF4 yielded the encapsulated complex with a bent coordination mode. Two organometallic fragments inclusioned inside a 1,3-alternate calix[4]arene tetraphosphane was also achieved by the reaction of 4 with [PtH(PPh3)2 (thf)]+. Full characterization includes X-ray structural studies of compounds 4-6.     

Asymmetric synthesis of beta-amino carbonyl compounds with N-sulfinyl beta-amino Weinreb amides

[reaction: see text] Diverse organometallic reagents readily add to enantiopure N-sulfinyl beta-amino Weinreb amides providing the corresponding, stable, N-sulfinyl beta-amino carbonyl compounds in good to excellent yields. This new methodology represents a general solution to the problem of beta-amino carbonyl syntheses, which are important chiral building blocks and constituents of natural products. N-Sulfinyl beta-amino Weinreb amides are prepared by reaction of the potassium enolate of N-methoxy N-methylacetamide with sulfinimines (N-sulfinyl imines) or lithium N,O-dimethylhydroxylamine with N-sulfinyl beta-amino esters.     

Photocatalytic decomposition of orange II over TiO2-loaded on SBA-15 prepared using a microwave process

SBA-15 mesoporous material was prepared by microwave-hydrothermal method and was used as support in TiO₂-loaded SBA-15 photocatalysts. The physical properties of these particles were investigated. We also examined the activity of these samples as photocatalysts for the decomposition of orange II. Titania loaded on a silica matrix decreases the surface area of the support as expected for TiO₂ incorporation. For TiO₂-loaded SBA-15 photocatalysts, the IR absorption at ∼960 cm⁻¹ commonly accepted as the characteristic vibration of the Ti-O-Si bond. The photocatalytic activity increases with an increase of the TiO₂ loading.     

Structures and properties of self-assembled monolayers of bistable [2]rotaxanes on Au (111) surfaces from molecular dynamics simulations validated with experiment

Bistable [2]rotaxanes display controllable switching properties in solution, on surfaces, and in devices. These phenomena are based on the electrochemically and electrically driven mechanical shuttling motion of the ring-shaped component, cyclobis(paraquat-p-phenylene) (CBPQT(4+)) (denoted as the ring), between a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) ring system located along a dumbbell component. When the ring is encircling the TTF unit, this co-conformation of the rotaxane is the most stable and thus designated the ground-state co-conformer (GSCC), whereas the other co-conformation with the ring surrounding the DNP ring system is less favored and so designated the metastable-state co-conformer (MSCC). We report here the structure and properties of self-assembled monolayers (SAMs) of a bistable [2]rotaxane on Au (111) surfaces as a function of surface coverage based on atomistic molecular dynamics (MD) studies with a force field optimized from DFT calculations and we report several experiments that validate the predictions. On the basis of both the total energy per rotaxane and the calculated stress that is parallel to the surface, we find that the optimal packing density of the SAM corresponds to a surface coverage of 115 A(2)/molecule (one molecule per 4 x 4 grid of surface Au atoms) for both the GSCC and MSCC, and that the former is more stable than the latter by 14 kcal/mol at the optimum packing density. We find that the SAM retains hexagonal packing, except for the case at twice the optimum packing density (65 A(2)/molecule, the 3 x 3 grid). For the GSCC and MSCC, investigated at the optimum coverage, the tilt of the ring with respect to the normal is theta = 39 degrees and 61 degrees, respectively, while the tilt angle of the entire rotaxane is psi = 41 degrees and 46 degrees , respectively. Although the tilt angle of the ring decreases with decreasing surface coverage, the tilt angle of the rotaxane has a maximum at 144 A(2)/molecule (the 4 x 5 grid/molecule) of 50 degrees and 51 degrees for the GSCC and MSCC, respectively. The hexafluorophosphate counterions (PF(6)(-)) stay localized around the ring during the 2 ns MD simulation. On the basis of the calculated density profile, we find that the thickness of the SAM is 40.5 A at the optimum coverage for the GSCC and 40.0 A for MSCC, and that the thicknesses become less with decreasing surface coverage. The calculated surface tension at the optimal packing density is 45 and 65 dyn/cm for the GSCC and MSCC, respectively. This difference suggests that the water contact angle for the GSCC is larger than for the MSCC, a prediction that is verified by experiments on Langmuir-Blodgett monolayers of amphiphilic [2]rotaxanes.     

A series of tetrahomodioxacalix[4]biscrown-n. Syntheses, crystal structures, and metal binding abilities

A series of novel tetrahomodioxacalix[4]biscrowns with crown-2, crown-3, crown-4, crown-5, and crown-6 units were synthesized. Conformations of each product are dependent on the base used and their conformation stabilities. All conformations were proven by NMR spectra and/or X-ray crystal structures. The 1,3-alternate homodioxacalix[4]biscrown-4 (4b) shows the best selectivity for K+, whereas the 1,3-alternate homodioxacalix[4]crown-5 (5) does for Cs+. Those selectivities are attributable to electrostatic interaction between the metal ion and the crown ring, as well as a pi-metal complexation. However, the C-1,2-alternate conformation does not take the metal ions regardless of the crown species as a result of steric hindrance from the methylene bridge of an ArCH2Ar unit.