Effect of Ca interlayer thickness on electron injection of lithium quinolate/Ca/Al cathodes

Electron injection behavior of lithium quinolate (Liq)/Ca/Al cathode was investigated by using X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy (UPS). Interfacial energy barrier lowering of Liq/Ca/Al cathode was dependent on Ca thickness and maximum energy level shift was observed at a Ca thickness of 1 nm. Maximum current density could be obtained in Liq/Ca/Al device at a Ca thickness of 1 nm and it was well correlated with energy level shift from UPS measurement. Power efficiency of Liq/Al device could be improved by more than 70% by inserting Ca layer between Liq and Al.     

Stimulated emission of free excitons in Cd1−xMnxTe under nonresonant two-photon excitation

We report on free excitons coexisting with exciton magnetic polarons (EMPs) in bulk semimagnetic semiconductors of Cd_1−xMn_xTe for 0.04?x?0.36 at 2 K under nonresonant two-photon excitation. This two-photon excitation not only generates free excitons but also more efficiently creates EMPs compared with ordinary one-photon excitation. Stimulated emission from free excitons is demonstrated under strong two-photon excitation.     

广义Birkhoff系统动力学的一类逆问题

针对广义Birkhoff系统动力学,提出广义Birkhoff系统动力学的一类逆问题,研究由已知积分流形来建立广义Birkhoff方程. 这类逆问题的解通常不是唯一的,需给出必要的补充要求. 最后举例说明结果的应用. 关键词： 广义Birkhoff系统 动力学逆问题 积分流形     

Improved device performance in nonpolar a ‐plane GaN LEDs using a Ni/Al/Ni/Au n‐type ohmic contact

The authors report upon the increased light‐output power (P_out) via a reduction in the forward voltage (V_f) for nonpolar a ‐plane GaN LEDs using Ni/Al/Ni/Au n‐type ohmic contacts. The specific contact resistivity of the Ni/Al/Ni/Au contact is found to be as low as 5.6 × 10^–5 whereas that of a typical Ti/Al/Ni/Au contact is 6.8 × 10^–4 Ω cm², after annealing at 700 °C. The X‐ray photoelectron spectroscopy results show that the upward surface band bending is less pronounced for the Ni/Al contact compared to the Ti/Al contact, leading to a decrease in the effective Schottky barrier height (SBH). The V_f of the nonpolar LEDs decreases by 10% and P_out increases by 15% when the Ni/Al/Ni/Au scheme is used instead of the typical Ti/Al/Ni/Au metal scheme. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Highly Bright and Photostable Li(Gd,Y)F4:Yb,Er/LiGdF4 Core/Shell Upconversion Nanophosphors for Bioimaging Applications

Intense green‐emitting Li(Gd,Y)F₄:Yb,Er/LiGdF₄ core/shell (C/S) upconversion nanophosphors (UCNPs) with a tetragonal bipyramidal morphology are synthesized. The morphology and UC luminescence of the Li(Gd,Y)F₄:Yb,Er UCNPs are significantly affected by the Li precursors, and bright UC green‐emitting Li(Gd,Y)F₄:Yb,Er UCNPs with a tetragonal bipyramidal shape, i.e., UC tetragonal bipyramids (UCTBs), are synthesized using LiOH·H₂O as a Li precursor. A LiGdF₄ shell is grown on the Li(Gd,Y)F₄:Yb,Er UCTBs, and the C/S UCNPs exhibit 4.7 times higher luminescence intensity than core UCTBs. The C/S UCNPs show a high absolute UC quantum yield of 4.6% under excitation with 980 nm near infrared (NIR) light, and the UC luminescence from the C/S UCNPs is stable under continuous irradiation with the 980 nm NIR laser for 1 h. The hydrophobic surfaces of the as‐synthesized C/S UCNPs are modified to hydrophilic surfaces by using poly(acrylic acid) (PAA) for bioimaging applications. They are applied to human cervical adenocarcinoma (HeLa) cell imaging and SK‐MEL‐2 melanoma cell imaging and in vivo imaging, including subcutaneous and intramuscular imaging, and UC luminescence images with high signal‐to‐noise ratio are obtained. Furthermore, sentinel‐lymph‐node imaging is successfully conducted with the PAA‐capped Li(Gd,Y)F₄:Yb,Er/LiGdF₄ C/S UCNPs under illumination with NIR light.     

Strain-induced polarization rotation in epitaxial (001) BiFeO3 thin films

Direct measurement of the remanent polarization of high quality (001)-oriented epitaxial BiFeO3 thin films shows a strong strain dependence, even larger than conventional (001)-oriented PbTiO3 films. Thermodynamic analysis reveals that a strain-induced polarization rotation mechanism is responsible for the large change in the out-of-plane polarization of (001) BiFeO3 with biaxial strain while the spontaneous polarization itself remains almost constant.     

Multi-stacked organic light-emitting diodes using zinc oxide nanoparticle interfacial layers

Stacked organic light-emitting diodes (SOLEDs) with 30-nm nanoparticle (NP) interfacial layers were investigated. Zinc oxide (ZnO) was used as an interfacial layer between two green polymer (GP) layers. SOLEDs with NP interfacial layers had higher device efficiency than did a single-unit device due to the high probability of exciton recombination that originated from the Auger electron-assisted energy up-conversion process. Although the current density and luminance of SOLEDs with ZnO NP interfacial layers were smaller than those of the reference device, the efficiency was doubled because of the big band alignment difference and the large band gap between GP and ZnO NP interfacial layers, which induced more radiative-exciton recombination.     

Simultaneous Determination of Acetylsalicylic Acid and Caffeine in Pharmaceutical Formulation by First Derivative Synchronous Fluorimetric Method

A sensitive, rapid, and specific assay has been developed for the simultaneous determination of acetylsalicylic acid and caffeine in commercial tablets based on their natural fluorescence. The mixture of these drugs was resolved by first derivative synchronous fluorimetric technique using two scans. At Δλ=106 nm, using first derivative synchronous scanning, only acetylsalicylic acid yields a detectable signal at 316 nm (peak to zero method) which is unaffected by caffeine. At Δλ=30 nm, the signal of caffeine at 288 nm (peak to zero method) is not affected by acetylsalicylic acid. The range of application is between 0.021 and 41.62 μg ml⁻¹ (correlation coefficient, R=0.9995) for acetylsalicylic acid and between 0.4486 and 44.86 μg ml⁻¹ (correlation coefficient, R=0.99786) for caffeine. The recovery range of 98.40–102% for acetylsalicylic acid and 90–100.5% for caffeine from their synthetic mixture was reported. Overall recovery of both compounds about 97–99% for acetylsalicylic acid and 97–98% for caffeine was obtained from real sample analysis. The detection limits are 0.0013 μg ml⁻¹ and 0.0306 μg ml⁻¹ for acetylsalicylic acid and caffeine, respectively. The relative standard deviation (n=10) for 20 μg ml⁻¹ of acetylsalicylic acid is 2.75% and for 2.2 μg ml⁻¹of caffeine is 1.7%.     

Laser-induced acoustic wave generation/propagation/interaction in water in various internal channels

Short pulsed laser-induced single acoustic wave generation, propagation, interaction within a water-filled internal channel are experimentally and numerically studied. A large-area, short-duration, single-plane acoustic wave was generated by the thermoelastic interaction of a homogenized nanosecond pulsed laser beam with a liquid–solid interface and propagated at the speed of sound in water. Laser flash Schlieren photography was used to visualize the transient interaction of the plane acoustic wave in various internal channel structures ((a) sudden expansion and contraction channels, (b) bifurcating channels, (c) gradual contraction wall channels and (d) a cylinder). Fairly good agreement between the experimental results and numerical simulation is observed.