Coherence and correlation parameters for thed 3 Π u − (v=0,1,2,3;N=1) states of H2

We have applied the density matrix formalism and the distorted-wave approximation to calculate the Stokes parameters for thed ³ Π _u ^? (v=0,1,2,3;N=1) states of H₂ excited from the X¹ ∑ _g ⁺ (v=0,N=1) state by electron impact at the incident energies ranging from 15 to 40 eV. Our results show that these parameters are nearly independent of the vibrational quantum number of the excited states. However, the polarization of the radiation emitted by the target in the subsequent decay process increases with increasing incident energies.     

Benzannelated analogs of phenanthro[1,2-b]- and [2,1-b]thiophene: Synthesis and structural characterization by two-dimensional NMR and X-ray techniques

Syntheses of benzo[3,4]phenanthro[1,2-b]thiophene, benzo[3,4]phenanthro[2,1-b]thiophene and their 1-methyl analogs are reported as potential constituents of solvent refined coal liquids and for mutagenicity testing. The attempted synthesis of the 13-methyl analogs which gave the 11-methyl isomers is also described. Total assignments of the ¹H- and ¹³C-nmr spectra based on long range optimized heteronuclear protoncarbon two-dimensional chemical shift correlation are reported. Carbon assignments obtained for benzo[3,4]-phenanthro[1,2-b]thiophene using this approach were confirmed with a 125 MHz ¹³C–¹³C INADEQUATE spectrum. X-Ray crystal structures were determined for benzo[3,4]phenanthro[1,2-b]thiophene and 1-methyl-benzo[3,4]phenanthro[2,1-b]thiophene. Both molecules were helically distorted from planarity. Close intramolecular contacts between the bay region H1–H13 and ClMe-H13 of 2.03 and 2.28 Å, respectively, were responsible for the distortions. There were no close intermolecular contacts of <3.5Å. both molecules refined to an R value of <0.05.     

Synthesis of phenaleno[1,9-bc]thiophene

The cyclization of 2-acetonylthionaphthalene, prepared from 2-mercaptonaphthalene (1) and chloro-acetone in the presence of sodium hydroxide, with polyphosphoric acid gave 1-methylnaphtho[2,1-b]thiophene (4) in 64% overall yield from 1. By bromination with N-bromosuccinimide, 4 was converted in 40% yield into l-bromomethylnaphtho[2,1-b]thiophene (8) . Treatment of 8 with potassium cyanide in a phase-transfer medium gave l-cyanomethylnaphtho[2,1-b]thiophene (10) in good yield. Compound 10 was reduced to the corresponding aldehyde 11 and then cyclized with polyphosphoric acid to phenaleno[l,9-bc]thiophene (12) in 24% overall yield from 10.     

Synthesis of novel chitosan resin derivatized with serine moiety for the column collection/concentration of uranium and the determination of uranium by ICP-MS

A chitosan resin derivatized with serine moiety (serine-type chitosan) was newly developed by using the cross-linked chitosan as a base material. The adsorption behavior of trace amounts of metal ions on the serine-type chitosan resin was systematically examined by packing it in a mini-column, passing a metal solution through it and measuring metal ions in the effluent by ICP-MS. The resin could adsorb a number of metal cations at pH from neutral to alkaline region, and several oxoanionic metals at acidic pH region by an anion exchange mechanism. Uranium and Cu could be adsorbed selectively at pH from acidic to alkaline region by a chelating mechanism; U could be adsorbed quantitatively even at pH 3–4. Uranium adsorbed on the resin was easily eluted with 1 M nitric acid: the preconcentration (5-, 10-, 50- and 100-fold) of U was possible. The column treatment method was used prior to the ICP-MS measurement of U in natural river, sea and tap waters; R.S.D. were 2.63, 1.13 and 1.37%, respectively. Uranium in tap water could be determined by 10-fold preconcentration: analytical result was 1.46±0.02 ppt. The resin also was applied to the recovery of U in sea water: the recovery tests for artificial and natural sea water were 97.1 and 93.0%, respectively.     

Angular polycyclic thiophenes containing two thiophene rings. Part II

The syntheses of naphtho[1,2–6:7,6-b′]bisbenzo[b]thiophene ( 4 ), naphtho[1,2–6:7,8-b′]bisbenzo[b]thiophene ( 5 ), naphtho[2,1-b:7,6-b′]bisbenzo[b]thiophene ( 8 ), naphtho[2,1-b:7,8-b′]bisbenzo[b]thiophene ( 9 ), naphtho-[1,2–6:5,6-b′]bisbenzo[b]thiophene ( 14 ), naphtho[1,2–6:6,5-b]bisbenzo[b]thiophene ( 17 ) and naphtho[2,1–6:-6,5-b′]bisbenzo[b]thiophene ( 23 ) are reported.     

Novel ene trimerization of 1-phenylcyclopropene

1-Phenylcyclopropene (1) was synthesized by treatment of 1,1,2-tribromo-2-phenylcyclopropane (2) with 2.5 equiv of methyllithium followed by protonation. Compound 1 underwent ene dimerization to form ene dimer 5 followed by ene reaction with monomer 1 (enophile) to give an ene trimer 6. Both of these two ene reactions derived endo transition states. In the meantime, the [2+2] adduct, trans-1,2-diphenylbicyclo[3.1.0.0(2,4)]hexane (7), was also formed. When the adduct 7 was heated at THF refluxing temperature, 1,2-diphenylcyclohexa-1,4-diene (8) was obtained. Compound 8 was treated with DDQ to yield o-diphenylbenzene.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

EXAFS study of Zn sorption mechanisms on hydrous ferric oxide over extended reaction time

The sorption species and coordination environment of zinc sorbed on to hydrous ferric oxide (HFO) did not change for aging times up to six months. At an initial concentration of 10(4-) M, Zn formed innersphere surface complexes on the surface of HFO. Zn was tetrahedrally coordinated with oxygen atoms at ZnO bond distance of approximately 1.94-1.97 A with coordination number of approximately 3.8-4.7. In the second shell Zn appeared to be coordinated with Fe with a bond distance of approximately 3.42-3.49 A. At an initial concentration of 10(3-) M, both innersphere and polynuclear complexes were feasible sorption products. The first shell was tetrahedrally coordinated with about four oxygen atoms at a bond distance of 1.96 A. The second shell could be attributed to either ZnFe or ZnZn correlations with almost the same bond distance of 3.42-3.44 A.     

Integral equation theory for atactic polystyrene melt with a coarse-grained model

In this work, an integral equation approach to investigate the atactic polystyrene (aPS) melt based on polymer reference interaction site model (PRISM) theory is proposed. The intramolecular structure factors, required as input to PRISM theory, are obtained from the semiflexible chain model. With a novel coarse-graining procedure and the explicit-atom molecular-dynamics (MD) simulations for aPS, the parameters needed for the coarse-grained model are obtained by using an automatic simplex optimization. These parameters can be used to describe the structure and thermodynamic properties of the complex aPS melt and good agreement is obtained between the theory and MD simulations. The proposed integral equation approach provides a basis for describing the structure and properties of PS nanocomposites where the application of molecular simulation is difficult.     

Atom-surface elastic scattering in the presence of laser radiation

A qualitative discussion on atom-surface elastic scattering taking place in the presence of laser radiation is given. It is suggested that appreciable effects of laser radiation on diffraction patterns may be expected if the laser radiation is capable of inducing electronic transitions in atoms with a large probability.Research sponsored by the Air Force Office of Scientific Research (AFSC), United States Air Force, under Contract No. F49620-78-C-0005, and the National Science Foundation under Grant No. CHE77-27826. The United States Government is authorized to reproduce and distribute reprints for governmental purposes notwithstanding any copyright notation hereon.Alfred P. Sloan Research Fellow, 1976–1980; Camille and Henry Dreyfus Teacher-Scholar, 1975–1980.