Preliminary study of fabrication technology for transmutation fuels using surrogate alloy

Journal of Radioanalytical and Nuclear Chemistry - A preliminary study on the fabrication of transmutation fuels was carried out using an injection casting technique. Melts of binary U–Zr, a...     

Fabrication of low OH loss holey fibers with varying air hole sizes and their optical properties

We experimentally investigate a flexible fabrication technique for low OH and transmission losses holey fibers with a Ge-doped core and air holes in a silica cladding region. Versatile holey fibers of different size, pitch, and shape of air holes were achieved by controlling the temperature and heating time of the holey fiber preform. In addition, we suppress the OH loss of less than ∼0.323 dB/km at 1383 nm. After fabricating holey fibers, we measure their optical properties including cut-off wavelength, mode field diameter, splicing loss, dispersion, bending loss, and polarization dependent loss based on the size of air holes. The total transmission loss was measured to be ∼0.226 dB/km at 1550 nm by improving the fabrication process. After fabricating optical patch cord based on holey fibers, we measured the long-term stability of the fabricated holey fiber by using the temperature cycling technique for 24 and obtained low power fluctuation of 0.2 dB. We achieve the high quality holey fiber with a low bending loss of ∼0.04 dB/turn under a bending radius of 2.5 mm at 1550 nm. We also obtain a tunable band rejection filter with a number of bending turns.     

Misalignment tolerance analysis and fabrication for highly efficient parallel optical-electrical convertor module

A compact, highly efficient, and passively assembled parallel optical-electrical convertor module (POECM) for active optical cable application is proposed. This paper presents our POECM structure, optical design simulation results, fabrication process, and data transmission test results, in sequence. The POECM has a compact size of \(18.5\hbox {mm} \times 10\hbox {mm} \times 2.8\hbox {mm}\) . We confirm a data rate of total throughput at 21.6 Gbps ( \(5.4\hbox {Gbps} \times 4\) channels) with a bit error rate of less than \(10^{-12}\) .     

Origin of cathodic degradation and new phase formation at the La0.9Sr0.1MnO3/YSZ interface

New phase formation at the La_0.9Sr_0.1MnO₃/YSZ interface and its effects on the cathodic performances were studied at 900 °C in air. The resistance caused by the interfacial product layer kept increasing with time to reach up to 40% of the total resistance after 500 h. The interfacial product was identified as La₂Zr₂O₇ by XRD measurement. The electrical conductivity of La₂Zr₂O₇ (2.4 × 10⁻⁵ S cm⁻¹ at 1000 °C), measured by AC impedance and current interruption methods, was 4 to 7 orders of magnitude smaller than those of La_0.9Sr_0.1MnO₃ electrode or YSZ electrolyte. Either the electronic conductivity or the electrochemical O₂ reduction activity of La₂Zr₂O₇ was negligible. Combining these results, a conclusion was made that the cathodic degradation comes mainly from the growth of interfacial product layer and its contribution to the cell resistance increment is ohmic in nature.     

The Smart 2-(2-Fluorobenzoyl)-N-(2-Methoxyphenyl)Hydrazinecarbothioamide Functionalized as Ni(II) Sensor in Micromolar Concentration Level and its Application in Live Cell Imaging

In recent years, fluorescent probes for the detection of environmentally and biologically important metal cations have received extensive attention for designing and development of fluorescent chemosensors. Herein, we report the photophysical results of 2-(2-fluorobenzoyl)-N-(2-methoxyphenyl) hydrazinecarbothioamide (4) functionalized as Ni (II) sensor in micromolar concentration level. Through fluorescence titration at 488 nm, we were confirmed that ligand 4 showed the remarkable emission by complexation between 4 and Ni (II) while it appeared no emission in case of the competitive ions (Cr³⁺, Fe²⁺, Co²⁺, Ba²⁺, Cu²⁺, Ca²⁺, Na⁺, K⁺, Cu⁺, Cs⁺). Furthermore, ligand 4 exhibited no toxicity with precise cell permeability toward normal living cells using L929 cell lines in bio imaging experiment investigated through confocal fluorescence microscope. The non-toxic behavior of ligand 4 (assessed by MTT assay) and its ability to track the Ni²⁺ in living cells suggest its possibility to use in biological system as nickel sensor.

Photonic Crystal Fiber Attenuator

We propose a novel fiber attenuator based on photonic crystal fibers. The difference in the modal field diameters of a conventional single mode fiber and a photonic crystal fiber was used. A variable optical attenuator was also achieved by applying macro-bending on the PCF part of the proposed attenuator     

Cobalt Based Nanoparticles Embedded Reduced Graphene Oxide Aerogel for Hydrogen Evolution Electrocatalyst

Efficient water electrolysis catalyst is highly demanded for the production of hydrogen as a sustainable energy fuel. It is reported that cobalt derived nanoparticle (CoS₂, CoP, CoS|P) decorated reduced graphene oxide (rGO) composite aerogel catalysts for highly active and reliable hydrogen evolution reaction electrocatalysts. 7 nm level cobalt derived nanoparticles are synthesized over graphene aerogel surfaces with excellent surface coverage and maximal expose of active sites. CoS|P/rGO hybrid aerogel composites show an excellent catalytic activity with overpotential of ≈169 mV at a current density of ≈10 mA cm^?2. Accordingly, efficient charge transfer is attained with Tafel slope of ≈52 mV dec^?1 and a charge transfer resistance (R_ct) of ≈12 Ω. This work suggests a viable route toward ultrasmall, uniform nanoparticles decorated graphene surfaces with well‐controlled chemical compositions, which can be generally useful for various applications commonly requiring large exposure of active surface area as well as robust interparticle charger transfer.     

G/M/1 queues with delayed vacations

We considerG/M/1 queues with multiple vacation discipline, where at the end of every busy period the server stays idle in the system for a period of time called changeover time and then follows a vacation if there is no arrival during the changeover time. The vacation time has a hyperexponential distribution. By using the methods of the shift operator and supplementary variable, we explicitly obtain the queue length probabilities at arrival time points and arbitrary time points simultaneously.     

Template‐free anion‐controlled synthesis of Pd (II) nano‐aggregates for the antifouling polymerization of CO and ethylene

The reaction of [(domppp) Pd (OAc)₂] [domppp = 1,3‐bis (di‐o‐methoxyphenylphosphino)propane] and imidazolium‐functionalized carboxylic acids containing various anions (Br^?, PF₆^?, SbF₆^? and BF₄^?) resulted in the formation of nano‐sized Pd (II) aggregates under template‐free conditions. The rate of formation of aggregates can be modulated by changing the anion, affecting the rate of polymerization of CO and olefins without fouling. Herein, we describe the analysis of Pd (II) catalysts by dynamic light scattering, atomic force microscopy, X‐ray photoelectron spectroscopy and X‐ray crystallography, and co‐ and terpolymerization results including the catalytic activity, and bulk density and molecular weight of polymers.