Efficient inverse radiation analysis in a cylindrical geometry using a combined method of hybrid genetic algorithm and finite-difference Newton method

An inverse radiation problem was considered to estimate boundary conditions such as temperature distribution and emissivity in axisymmetric absorbing, emitting, and scattering medium, given the measured incident radiative heat fluxes. The finite-volume method was employed to solve a direct radiative transfer equation for a two-dimensional axisymmetric geometry. Various parameter estimators, such as conjugate-gradient method, hybrid genetic algorithm, and finite-difference Newton method, were employed to solve the inverse problems, while discussing their performances in terms of estimation accuracy and computational efficiency. Based on this, we proposed, as a best inverse analysis tool, a new combined method that adopted the hybrid genetic algorithm as an initial value selector and used the finite-difference Newton method as a parameter estimator.     

An optimization method for designing SENSE imaging RF coil arrays

An optimization method in RF coil array design for SENSE imaging is described. Using this method the optimized RF coil geometries can be calculated numerically given the required SENSE imaging performance. Although this method can be applied to optimize the RF coil arrays for both 1D and 2D SENSE imaging, to demonstrate the potential applications of this method, we designed RF coil arrays for 2D SENSE imaging and compared their performance by simulation. An optimized 4-channel receive-only RF coil array designed for 2D SENSE imaging was implemented and tested to demonstrate the feasibility of the proposed technique. Imaging results showed reasonable agreement with the simulations, thus the method can be applied to RF coil array designs for SENSE imaging when optimum imaging performance is desired.     

A hybrid level set method for modelling detonation and combustion problems in complex geometries

We present an accurate and fast wave tracking method that uses parametric representations of tracked fronts, combined with modifications of level set methods that use narrow bands. Our strategy generates accurate computations of the front curvature and other geometric properties of the front. We introduce data structures that can store discrete representations of the location of the moving fronts and boundaries, as well as the corresponding level set fields, that are designed to reduce computational overhead and memory storage. We present an algorithm we call stack sweeping to efficiently sort and store data that is used to represent orientable fronts. Our implementation features two reciprocal procedures, a forward ‘front parameterization’ that constructs a parameterization of a front given a level set field and a backward ‘field construction’ that constructs an approximation of the signed normal distance to the front, given a parameterized representation of the front. These reciprocal procedures are used to achieve and maintain high spatial accuracy. Close to the front, precise computation of the normal distance is carried out by requiring that displacement vectors from grid points to the front be along a normal direction. For front curves in two dimensions, a cubic interpolation scheme is used, and G ¹ surface parameterization based on triangular patches is used for the three-dimensional implementation to compute the distances from grid points near the front. To demonstrate this new, high accuracy method we present validations and show examples of combustion-like applications that include detonation shock dynamics, material interface motions in a compressible multi-material simulation and the Stephan problem associated with dendrite solidification.     

Superconductivity and lattice instability in compressed lithium from Fermi surface hot spots

The highest superconducting temperature Tc observed in any elemental metal (Li with Tc approximately 18-20 K at pressure 35-48 GPa) is shown to arise from increasingly strong electron-phonon coupling concentrated along intersections of Kohn anomaly surfaces with the evolving Fermi surface. First-principles linear response calculations of the phonon spectrum and spectral function alpha2F(omega) reveal very strong Q- and phonon-polarization dependence of coupling strength, resulting in values of in the observed range. The sharp momentum dependence of the coupling even for the simple Li Fermi surface indicates more generally that a fine Q mesh is required for precise evaluation of lamda.     

Investigation of the effect of electron cyclotron heating on runaway generation in the KSTAR tokamak

Wave enhanced runaway generation is expected to play an important role in the conversion of plasma current into runaway current during major disruptions. The fast electrons created by electron cyclotron heating (ECH) were used to study this issue in KSTAR. It is found that the fast electrons driven by ECH can enhance runaway production in the flat top phase with high loop voltage. The runaway current in disruptions was not enhanced by the ECH produced fast electron population due to the strong magnetic fluctuations which inhibited the generation of runaway electrons. It is found that a complete loss of existing REs during thermal quench has occurred in KSTAR limiter configuration discharges.     

Forming process of unipolar resistance switching in Ta2O5−x thin films

We investigated the film-thickness and ambient oxygen-pressure dependence of the electric field, E_F, required to initiate unipolar resistance switching (URS) in Ta₂O_5?x thin films. We measured the dependence of E_F by applying a triangular-waveform voltage signal to the film over a wide sweep-rate range (v = 20 mV s^?1 to 5 MV s^?1). Our results showed that the URS-E_F was not influenced by the Ta₂O_5?x film thickness nor ambient oxygen-pressure. This suggested that the URS-forming process in Ta₂O_5?x thin films should be governed by thermally assisted dielectric breakdown in our measurement range.     

Band gap tunable and improved microstructure characteristics of Cu2ZnSn(S1−x,Sex)4 thin films by annealing under atmosphere containing S and Se

Cu₂ZnSn(S_xS_1?x)₄ (CZTSSe) thin films were prepared by annealing a stacked precursor prepared on Mo coated glass substrates by the sputtering technique. The stacked precursor thin films were prepared from Cu, SnS₂, and ZnS targets at room temperature with stacking orders of Cu/SnS₂/ZnS. The stacked precursor thin films were annealed using a tubular two zone furnace system under a mixed N₂ (95%) + H₂S (5%) + Se vaporization atmosphere at 580 °C for 2 h. The effects of different Se vaporization temperature from 250 °C to 500 °C on the structural, morphological, chemical, and optical properties of the CZTSSe thin films were investigated. X-ray diffraction patterns, Raman spectroscopy, and X-ray photoelectron spectroscopy results showed that the annealed thin films had a single kesterite crystal structure without a secondary phase. The 2θ angle position for the peaks from the (112) plane in the annealed thin films decreased with increasing Se vaporization temperature. Energy dispersive X-ray results showed that the presence of Se in annealed thin films increased from 0 at% to 42.7 at% with increasing Se vaporization temperatures. UV–VIS spectroscopy results showed that the absorption coefficient of all the annealed thin films was over 10⁴ cm^?1 and that the optical band gap energy decreased from 1.5 eV to 1.05 eV with increasing Se vaporization temperature.     

Significant decrease in interfacial energy of grain boundary through serrated grain boundary transition

The mechanism of serrated grain boundary formation and its effect on liquation behaviour have been studied in a wrought nickel-based superalloy – Alloy 263. It was newly discovered that grain boundaries are considerably serrated in the absence of γ?′-phase or M₂₃C₆ at the grain boundaries. An electron energy-loss spectroscopy study suggests that serration is triggered by the discontinuous segregation of C and Cr atoms at grain boundaries for the purpose of relieving the excessive elastic strain energy. The grain boundaries serrate to have specific segments approaching one {111} low-index plane at a boundary so that the interfacial free energy of the grain boundary can be decreased, which may be responsible for the driving force of the serration. The serrated grain boundaries effectively suppress grain coarsening and are highly resistant to liquation due to their lower wettability resulting from a lower interfacial energy of the grain boundary.     

Current–voltage characteristic of BaTiO3−δ in its mixed n/p regime under oxygen potential gradients

Current (I)–voltage (V) characteristic under oxygen potential gradients was experimentally examined on single crystal BaTiO_3−δ in its mixed ion/electron/hole regime at 1000 °C. The variation of I vs. V appears similar to that of an n/p junction, but with the limiting slope (dI/dV) approaching the maximum and minimum possible equilibrium conductances in the given oxygen potential gradient as increasing forward and reverse bias, respectively. This characteristic has been precisely traced theoretically by using the partial ionic and electronic conductivities of BaTiO_3−δ as measured against uniform oxygen chemical potential in equilibrium state. The nonlinear characteristic is attributed to the redistribution of oxygen chemical potential that is caused by a non-vanishing gradient of the ionic transference number of the oxide under the given oxygen potential gradient. It is demonstrated that the bulk transport properties of a mixed conductor may be tailored by terminal voltage in a chemical potential gradient.